BenQ PW9520 manual

BenQ PW9520
7.6 · 1
PDF manual
 · 75 pages
English
manualBenQ PW9520

English

52

• Pack the projector in its original packing or equivalent.

Transporting the projector

It is recommended that you ship the projector with its original packing or equivalent.

Replacing the lamp

The projection lamps should be replaced when they burn out. They should only be replaced with a

certied replacement part, contact your local dealer if unsure.

Lamps are positioned differently. Take care not to force the lamps when replacing.
Installation of both lamp modules (Lamp 1 and Lamp 2) is required to operate the projector in dual or single lamp
mode. If only a single lamp module is installed, the projector's lamp will not turn on and will appear as a lamp failure.
The lamp contains a certain amount of mercury and should be disposed of according to local ordinance regulations.
Avoid touching the glass surface of the new lamp: doing so may shorten its operation life.

Lamp Handling Precautions

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may
result in accidents, injury, or create a re hazard.
Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same
life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.
If the projector indicates that the lamp should be replaced, i.e., if LAMP 1 and/or LAMP 2 light up, replace the lamp
with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp
Replacement section of this manual.) Continuous use of the lamp with LAMP 1 and/or LAMP 2 lighted may increase
the risk of lamp explosion.
A lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to
an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp
are being used.
If a lamp explodes, the following safety precautions should be taken:
Disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a
checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken
shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken
shards found should be cleaned up carefully. No one should check the inside of the projector except those who
are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service
the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury
caused by pieces of broken glass.
The projection lamp should be replaced when it burns out. It should only be replaced with a certied replacement
part, which you can order from your local dealer.
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to do so could
result in a severe burn.
Safety glasses should be worn when replacing the lamp while the projector is ceiling mounted.

Manual

View the manual for the BenQ PW9520 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the BenQ PW9520 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ PW9520 specifications

Below you will find the product specifications and the manual specifications of the BenQ PW9520.

General
BrandBenQ
ModelPW9520 | 9H.JDF77.26E
Productvideo projector
EAN0840046032326, 4718755057250
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness6000 ANSI lumens
Projection technologyDLP
Projector native resolutionWXGA (1280x720)
Screen size compatibility80 - 500 "
Native aspect ratio16:10
Projection distance- m
Contrast ratio (typical)2800:1
Number of colors1.073 billion colors
Keystone correction, horizontal-30 - 30 °
Keystone correction, vertical-30 - 30 °
Vertical scan range23 - 85 Hz
Horizontal scan range31 - 92 kHz
Matrix size0.7 "
Matrix type3-panel (p-Si TFT active)
Lens system
Zoom ratio1.3:1
Focal length range26 - 34 mm
Aperture range (F-F)1.64 - 1.86
Horizontal lens shift range-10 - 10 %
Vertical lens shift range0 - 50 %
Throw ratio1.81 - 2.38
Light source
Service life of light source2500 h
Service life of light source (economic mode)3000 h
Lamp power280 W
Light source typeLamp
Video
Analog signal format systemNTSC, PAL, SECAM
Full HDNo
3DNo
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Ports & interfaces
VGA (D-Sub) ports quantity1
HDMI ports quantity1
USB 2.0 ports quantity1
Composite video in1
Component video (YPbPr/YCbCr) in0
HDMI version1.4
PC in (D-Sub)Yes
DVI portYes
Remote (IR) output2
S-Video inputs quantity1
12V triggerYes
Audio (L/R) in0
HDMI connector typeFull-size
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Wi-Fi-
Other features
RS-232 ports1
Storage
Card reader integratedNo
Features
HDCPYes
Preset modesGame, Presentation, Standard
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesCHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS, SWE
Noise level39 dB
Noise level (economic mode)34 dB
Multimedia
Built-in speaker(s)No
Design
Product colorGray
Product typeLarge venue projector
PlacementDesktop, Ceiling
Display
Built-in displayNo
Power
Power sourceAC
Power consumption (typical)670 W
Power consumption (standby)0.5 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Weight & dimensions
Width505 mm
Height194 mm
Depth385 mm
Weight16500 g
Packaging content
Handheld remote controlYes
Cables includedAC, VGA
Quick start guideYes
ManualYes
Warranty cardYes
Logistics data
Harmonized System (HS) code85286200
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ PW9520 below.

What is the weight of the BenQ PW9520?

The BenQ PW9520 has a weight of 16500 g.

What is the height of the BenQ PW9520?

The BenQ PW9520 has a height of 194 mm.

What is the width of the BenQ PW9520?

The BenQ PW9520 has a width of 505 mm.

What is the depth of the BenQ PW9520?

The BenQ PW9520 has a depth of 385 mm.

Is the manual of the BenQ PW9520 available in English?

Yes, the manual of the BenQ PW9520 is available in English .

Is your question not listed? Ask your question here

No results