Input signal frequency exceeds the projector’s range.
Lamp Warning - Change
Lamp If Brightness Is Low.
The lamp has been in operation for over 1980 hours.
Install a new lamp for optimal performance. This
message will display for 10 seconds after starting up
the projector.
Out Of Lamp Usage Time -
Change The Lamp! The
Power Will Turn Off After
3000 Hours.
The lamp has been in operation for over 2980 hours,
and the power will turn off after 3000 hours. This
message will display for 30 seconds after starting up
the projector.
Out Of Lamp Usage Time -
Change The Lamp! Press
<MENU> to enable
<RESET>
The lamp has been in operation for over 3000 hours.
The warning message will display for 40 seconds and
then shut down automatically. If you have installed a
new lamp, press <MENU> during the OSD on to
enter for resetting the lamp hour to zero.
View the manual for the BenQ PB6100 here, for free. This manual comes under the category Video projectors and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the BenQ PB6100 or do you need help? Ask your question here
Do you have a question about the BenQ and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other BenQ owners to provide you with a good answer.
Need help?
Do you have a question about the BenQ and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other BenQ owners to provide you with a good answer.
Number of questions: 0