BenQ PB6100 manual

BenQ PB6100
9.3 · 1
PDF manual
 · 41 pages
English
manualBenQ PB6100
Troubleshooting 31

Troubleshooting

Common Problems & Solutions

NO POWER

Try these solutions:
Make sure the power cord is inserted snugged into the AC adapter socket.
Make sure the power cord is inserted snugged into the power outlet.
Toggle the power switch to the position “
|”.
Wait 110 seconds after the projector is turned off before turning the projector back on.

NO PICTURE

Try these solutions:
Check for the proper input source.
Ensure all cables are connected properly.
Adjust the brightness and contrast.
Remove the lens cap.

TRAPEZOID IMAGE ON THE SCREEN

Try these solutions:
Reposition the unit to improve its angle on the screen.
•Use the Keystone correction key on the control panel of the projector or the remote
control unit.

POOR COLOR

Try these solutions:
Select the correct video system.
Adjust brightness, contrast, or saturation.

BLURRED IMAGE

Try these solutions:
Press Auto on the control panel of the projector or the remote control unit to get better
picture quality.
•Adjust the focus.
Reposition the unit to improve its projection angle.
Ensure the distance between the unit and screen is within the adjustment range of the
lens.

REMOTE CONTROL DOES NOT WORK

Try these solutions:
Replace the batteries with new ones.
Make sure there is no obstacle between the remote control and the projector.
Stand within 6 meters (19.5 feet) of the projector.
Make sure nothing is blocking the front and rear receivers.

View the manual for the BenQ PB6100 here, for free. This manual comes under the category Video projectors and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the BenQ PB6100 or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other BenQ owners to provide you with a good answer.

Number of questions: 0

Convenience in the palm of your hand with a remote control that makes controlling your display easier than ever.
General
BenQ
PB6100 | PB6100
Video projector
English
User manual (PDF)
Projector
Projector brightness- ANSI lumens
Projection technology-
Projector native resolutionXGA (1024x768)
Contrast ratio (typical)-
Projection distance- m
Screen size compatibility- "
Other features
Aspect ratio-
RS-232 ports-
Dimensions (WxDxH)262 x 215.5 x 98.4 mm
Power requirements100 - 240 V CA
Weight (imperial)5.8 lbs
Lens system
Zoom ratio-
Focal length range23 - 26 mm
Light source
Service life of light source- h
Lamp power200 W
Light source typeLamp
Video
Analog signal format system-
Multimedia
Built-in speaker(s)-
Ports & interfaces
VGA (D-Sub) ports quantity-
S-Video inputs quantity-
Composite video in-
Component video (YPbPr/YCbCr) in-
Audio (L/R) in-
USB 2.0 ports quantity-
DVI port-
HDMI ports quantity-
Network
Ethernet LAN (RJ-45) ports0
Ethernet LAN
Wi-Fi-
Packaging content
Remote control included
Weight & dimensions
Weight2600 g
Power
Power consumption (typical)285 W
Power consumption (standby)- W
Features
Noise level- dB
Operational conditions
Operating temperature (T-T)0 - 40 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ PB6100 below.

Is your question not listed? Ask your question here

No results