BenQ MH606 manual

BenQ MH606
5.1 · 1
PDF manual
 · 48 pages
English
manualBenQ MH606
24 Operation

Changing the password

1. Go to Advanced Menu - Settings > Security Settings > Change Password.
2. Press OK. The message “Input Current Password” appears.
3. Enter the old password.
• If the password is correct, another message “Input New Password” appears.
• If the password is incorrect, the password error message will appear, and the message “Input
Current Password” appears for your retry. You can press BACK to cancel the change or try
another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.

Disabling the password function

To disable password protection, go to Advanced Menu - Settings > Security Settings > Power
On Lock and press / to select Off. The message “Input Current Password” appears. Enter the
current password.
• If the password is correct, the OSD menu returns to the Security Settings page. You will not
have to enter the password next time turning on the projector.
• If the password is incorrect, the password error message will appear, and the message “Input
Current Password” appears for your retry. You can press BACK to cancel the change or try
another password.

Switching input signal

The projector can be connected to multiple devices at the same time.
However, it can only display one full screen at a time. When starting
up, the projector automatically searches for the available signals.
Be sure the Advanced Menu - Settings > Auto Source Search
menu is On if you want the projector to automatically search for the
signals.
To select the source:
1. Press SOURCE. A source selection bar appears.
2. Press / until your desired signal is selected and press OK.
Once detected, the selected source information will appear at the corner of the screen for seconds.
If there is multiple equipment connected to the projector, repeat steps 1-2 to search for another
signal.
Though the password function is disabled, you need to keep the old password in hand should you ever need to
re-activate the password function by entering the old password.
• The brightness level of the projected image will change accordingly when you switch between different input
signals.
• For best display picture results, you should select and use an input signal which outputs at the projector’s native
resolution. Any other resolutions will be scaled by the projector depending upon the “aspect ratio” setting,
which may cause some image distortion or loss of picture clarity. See Aspect Ratio on page 26.

Manual

View the manual for the BenQ MH606 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.1. This manual is available in the following languages: English. Do you have a question about the BenQ MH606 or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ MH606 specifications

Below you will find the product specifications and the manual specifications of the BenQ MH606.

General
BrandBenQ
ModelMH606 | 9H.JGX77.13E
Productvideo projector
EAN4718755069925
LanguageEnglish
FiletypeUser manual (PDF)
Network
Wi-Fi-
Ethernet LAN (RJ-45) ports0
Ethernet LANNo
Projector
Projector brightness3500 ANSI lumens
Contrast ratio (typical)10000:1
Projection technologyDLP
Projector native resolution1080p (1920x1080)
Number of colors1.073 billion colors
Native aspect ratio16:9
Keystone correction, vertical-40 - 40 °
Screen size compatibility30 - 300 "
Horizontal scan range15 - 102 kHz
Vertical scan range23 - 120 Hz
Projection distance- m
Video
Full HDYes
Supported graphics resolutions640 x 480 (VGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
3DYes
Analog signal format systemNTSC, PAL, SECAM
Supported 3D formatsFrame Sequential, Frame packing, Side by side, Top and bottom
Light source
Lamp power200 W
Lamps quantity1 lamp(s)
Service life of light source5000 h
Service life of light source (economic mode)15000 h
Lamp typeUHP
Light source typeLamp
Lens system
Throw ratio1.49 - 1.64:1
Zoom ratio1.1:1
Focal length range22 - 24.1 mm
Aperture range (F-F)2.56 - 2.68
Offset108 %
Design
Product colorWhite
Product typeStandard throw projector
Market positioningBusiness
PlacementDesktop
Multimedia
Built-in speaker(s)Yes
RMS rated power2 W
Number of built-in speakers1
Image formats supportedJPG
Ports & interfaces
VGA (D-Sub) ports quantity2
S-Video inputs quantity1
Composite video in1
HDMI ports quantity2
DVI portNo
USB 2.0 ports quantity2
Audio (L/R) in0
Headphone outputs1
Microphone inYes
Serial interface typeRS-232
CardBus PCMCIA slot typeNo
Component video (YPbPr/YCbCr) in0
AC (power) inYes
Mobile High-Definition Link (MHL)Yes
Other features
RS-232 ports1
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power sourceAC
Power consumption (typical)260 W
Power consumption (standby)0.5 W
Auto power offYes
Features
Noise level32 dB
Noise level (economic mode)29 dB
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Operational conditions
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Width296 mm
Depth221 mm
Height120 mm
Weight2300 g
Packaging content
Handheld remote controlYes
Remote control typeIR
Cables includedAC, VGA
ManualYes
Quick start guideYes
Warranty cardYes
Storage
Card reader integratedNo
Optical disc player typeNot included
Display
Built-in display-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ MH606 below.

What is the weight of the BenQ MH606?

The BenQ MH606 has a weight of 2300 g.

What is the height of the BenQ MH606?

The BenQ MH606 has a height of 120 mm.

What is the width of the BenQ MH606?

The BenQ MH606 has a width of 296 mm.

What is the depth of the BenQ MH606?

The BenQ MH606 has a depth of 221 mm.

Is the manual of the BenQ MH606 available in English?

Yes, the manual of the BenQ MH606 is available in English .

Is your question not listed? Ask your question here

No results