BenQ LU951ST manual

BenQ LU951ST
5.8 · 1
PDF manual
 · 54 pages
English
manualBenQ LU951ST
44 Troubleshooting

Tro u bles h o o t i n g

The projector does not turn on.

Cause Remedy
There is no power from the power cord.
Plug the power cord into the AC power jack on the
projector, and plug the power cord into the power outlet. If
the power outlet has a switch, make sure that it is switched
on.
Attempting to turn the projector on again during
the cooling process.
Wait until the cooling down process has completed.
No picture
Cause Remedy
The video source is not turned on or connected
correctly.
Turn the video source on and check that the signal cable is
connected correctly.
The projector is not correctly connected to the
input signal device.
Check the connection.
The input signal has not been correctly selected. Select the correct input signal with the SOURCE key.
The lens cover is still closed. Open the lens cover.
Blurred image
Cause Remedy
The projection lens is not correctly focused. Adjust the focus of the lens using the focus ring.
The projector and the screen are not aligned
properly.
Adjust the projection angle and direction as well as the
height of the projector if necessary.
The lens cover is still closed. Open the lens cover.
Remote control does not work.
Cause Remedy
The batteries are out of power. Replace both of the batteries with new ones.
There is an obstacle between the remote control
and the projector.
Remove the obstacle.
You are too far away from the projector. Stand within 8 meters (26 feet) of the projector.
The password is incorrect.
Cause Remedy
You do not remember the password. See Entering the password recall procedure on page 24.

Manual

View the manual for the BenQ LU951ST here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the BenQ LU951ST or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ LU951ST specifications

Below you will find the product specifications and the manual specifications of the BenQ LU951ST.

General
BrandBenQ
ModelLU951ST | 9H.JJ777.15E
Productvideo projector
EAN4718755074523
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Matrix size0.47 "
Matrix typeDMD
Projector brightness5000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)100000:1
Number of colors1.073 billion colors
Native aspect ratio16:10
Keystone correction, horizontal-30 - 30 °
Keystone correction, vertical-30 - 30 °
Screen size compatibility30 - 300 "
Projection distance- m
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 102 kHz
Light source
Service life of light source20000 h
Light source typeLaser
Lens system
Zoom capabilityYes
Zoom ratio1.1:1
Zoom typeManual
FocusManual
Horizontal lens shift range-23 - 23 %
Vertical lens shift range-60 - 60 %
Throw ratio0.81 - 0.88:1
Focal length range8.6 - 9.4 mm
Aperture range (F-F)1.83 - 1.86
Design
Product colorBlack
Product typeStandard throw projector
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
Market positioningPresentation
PlacementDesktop, Ceiling
Features
HDCPYes
On Screen Display (OSD)Yes
Air filterYes
Noise level37 dB
Noise level (economic mode)35 dB
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, PER, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Ports & interfaces
HDBaseT portYes
DVI portNo
Component video (YPbPr/YCbCr) in0
Composite video in1
HDMI ports quantity4
VGA (D-Sub) ports quantity2
USB 2.0 ports quantity1
USB 2.0 Type-B ports quantity1
Audio (L/R) in1
Headphone outputs1
Microphone inYes
S-Video inputs quantity1
Serial interface typeRS-232
AC (power) inYes
12V triggerYes
PC in (D-Sub)Yes
Video
Full HDYes
3DYes
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Analog signal format systemNTSC, PAL, SECAM
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported 3D formatsFrame packing, Side by side, Top and bottom
Power
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)475 W
Power consumption (max)530 W
Power consumption (standby)0.5 W
Power consumption (network standby)2 W
Power consumption (economy mode)365 W
Auto power offYes
Weight & dimensions
Weight9400 g
Width490 mm
Height159 mm
Depth380 mm
Storage
Card reader integratedNo
Optical disc player typeNot included
Packaging content
Handheld remote controlYes
Cables includedAC
Batteries includedYes
Quick start guideYes
Warranty cardYes
Network
Wi-Fi-
Smart TVNo
Ethernet LANYes
Ethernet LAN (RJ-45) ports1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Operating altitude0 - 3000 m
Other features
RS-232 ports1
Display
Built-in display-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ LU951ST below.

What is the weight of the BenQ LU951ST?

The BenQ LU951ST has a weight of 9400 g.

What is the height of the BenQ LU951ST?

The BenQ LU951ST has a height of 159 mm.

What is the width of the BenQ LU951ST?

The BenQ LU951ST has a width of 490 mm.

What is the depth of the BenQ LU951ST?

The BenQ LU951ST has a depth of 380 mm.

Is the manual of the BenQ LU951ST available in English?

Yes, the manual of the BenQ LU951ST is available in English .

Is your question not listed? Ask your question here

No results