BenQ LU951ST manual

BenQ LU951ST
5.8 · 1
PDF manual
 · 54 pages
English
manualBenQ LU951ST
4 Important safety instructions

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information technology
equipment. However, to ensure safe use of this product, it is important that you follow the instructions
mentioned in the user manual / installation guide and marked on the product.
1. Please read the user manual / installation guide before you operate your projector. Save
it for future reference.
2. Do not look straight at the projector lens during operation. The intense light beam may
damage your eyes.
3. Refer servicing to qualified service personnel.
4. Always open the lens shutter (if any) or remove the lens cap (if any) when the
projector light source is on.
5. The light source becomes extremely hot during operation.
6. In some countries, the line voltage is NOT stable. This projector is designed to operate safely
within a mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10
volts occur. In areas where the mains voltage may fluctuate or cut out, it is
recommended that you connect your projector through a power stabilizer, surge
protector or uninterruptible power supply (UPS).
7. Do not block the projection lens with any objects when the projector is under operation as this
could cause the objects to become heated and deformed or even cause a fire. To temporarily turn
off the light source, use the blank function.
8. Do not operate light sources beyond the rated light source life.
9. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining
serious damage.
10. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may
cause death if you should come into contact with live parts.
Under no circumstances should you ever undo or remove any other covers. Refer servicing only to
suitably qualified professional service personnel.
11. Do not block the ventilation holes.
- Do not place this projector on a blanket, bedding or any other soft surface.
- Do not cover this projector with a cloth or any other item.
- Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.
12. Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing
injury or resulting in damage to the projector.
13. Do not step on the projector or place any objects upon it. Besides probable physical damage to the
projector, doing so may result in accidents and possible injury.
14. When the projector is under operation, you may sense some heated air and odor from its
ventilation grill. It is a normal phenomenon and not a product defect.
15. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail.
If the projector does become wet, disconnect it from the power supply's power outlet and call
BenQ to have the projector serviced.
16. This apparatus must be earthed.
17. Do not place this projector in any of the following environments.

Manual

View the manual for the BenQ LU951ST here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the BenQ LU951ST or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ LU951ST specifications

Below you will find the product specifications and the manual specifications of the BenQ LU951ST.

General
BrandBenQ
ModelLU951ST | 9H.JJ777.15E
Productvideo projector
EAN4718755074523
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Matrix size0.47 "
Matrix typeDMD
Projector brightness5000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)100000:1
Number of colors1.073 billion colors
Native aspect ratio16:10
Keystone correction, horizontal-30 - 30 °
Keystone correction, vertical-30 - 30 °
Screen size compatibility30 - 300 "
Projection distance- m
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 102 kHz
Light source
Service life of light source20000 h
Light source typeLaser
Lens system
Zoom capabilityYes
Zoom ratio1.1:1
Zoom typeManual
FocusManual
Horizontal lens shift range-23 - 23 %
Vertical lens shift range-60 - 60 %
Throw ratio0.81 - 0.88:1
Focal length range8.6 - 9.4 mm
Aperture range (F-F)1.83 - 1.86
Design
Product colorBlack
Product typeStandard throw projector
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
Market positioningPresentation
PlacementDesktop, Ceiling
Features
HDCPYes
On Screen Display (OSD)Yes
Air filterYes
Noise level37 dB
Noise level (economic mode)35 dB
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, PER, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Ports & interfaces
HDBaseT portYes
DVI portNo
Component video (YPbPr/YCbCr) in0
Composite video in1
HDMI ports quantity4
VGA (D-Sub) ports quantity2
USB 2.0 ports quantity1
USB 2.0 Type-B ports quantity1
Audio (L/R) in1
Headphone outputs1
Microphone inYes
S-Video inputs quantity1
Serial interface typeRS-232
AC (power) inYes
12V triggerYes
PC in (D-Sub)Yes
Video
Full HDYes
3DYes
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Analog signal format systemNTSC, PAL, SECAM
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported 3D formatsFrame packing, Side by side, Top and bottom
Power
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)475 W
Power consumption (max)530 W
Power consumption (standby)0.5 W
Power consumption (network standby)2 W
Power consumption (economy mode)365 W
Auto power offYes
Weight & dimensions
Weight9400 g
Width490 mm
Height159 mm
Depth380 mm
Storage
Card reader integratedNo
Optical disc player typeNot included
Packaging content
Handheld remote controlYes
Cables includedAC
Batteries includedYes
Quick start guideYes
Warranty cardYes
Network
Wi-Fi-
Smart TVNo
Ethernet LANYes
Ethernet LAN (RJ-45) ports1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Operating altitude0 - 3000 m
Other features
RS-232 ports1
Display
Built-in display-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ LU951ST below.

What is the weight of the BenQ LU951ST?

The BenQ LU951ST has a weight of 9400 g.

What is the height of the BenQ LU951ST?

The BenQ LU951ST has a height of 159 mm.

What is the width of the BenQ LU951ST?

The BenQ LU951ST has a width of 490 mm.

What is the depth of the BenQ LU951ST?

The BenQ LU951ST has a depth of 380 mm.

Is the manual of the BenQ LU951ST available in English?

Yes, the manual of the BenQ LU951ST is available in English .

Is your question not listed? Ask your question here

No results