BenQ LU951ST manual

BenQ LU951ST
5.8 · 1
PDF manual
 · 54 pages
English
manualBenQ LU951ST
10 Introduction

Remote control

6. OK
Confirms the selected On-Screen Display
(OSD) menu item.
7. BACK
Goes back to previous OSD menu, exits and
saves menu settings.
8. MENU
Turns on the On-Screen Display (OSD) menu.
9. MUTE
Toggles projector audio between on and off.
10. Numeric buttons
Enters numbers in network settings or when
setting the remote control ID. Numeric
buttons 1, 2, 3, 4 cannot be pressed when
asked to enter password.
11. ALL
Press and hold ID SET until the ID setting
indicator lights up. Press ALL to clear current
ID setting of the remote control. The ID is
cleared successfully when you see the ID
setting indicator starts flickering and then
blackout.
12. ZOOM+/ZOOM-
Magnifies or reduces the projected picture
size.
13. ID setting indicator
14. QUICK INSTALL
Quickly selects several functions to adjust the
projected image and displays the test pattern.
15. INFO
Displays the projector information.
16. LIGHT SOURCE
Selects a suitable light source power among
the provided modes.
17. AUTO
Automatically determines the best picture
timings for the displayed image.
1. ON/ OFF
Toggles the projector between standby mode
and on.
2. SOURCE
Displays the source selection bar.
3. ASPECT
Selects the display aspect ratio.
4. PICTURE
Selects an available picture setup mode.
5. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys ( , )
Displays the keystone correction page.
Volume keys (, )
Decreases or increase the projector volume.
14
15
17
18
20
21
22
16
13
19
23
2
1
5
6
3
8
4
9
12
11
7
10

Manual

View the manual for the BenQ LU951ST here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the BenQ LU951ST or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ LU951ST specifications

Below you will find the product specifications and the manual specifications of the BenQ LU951ST.

General
BrandBenQ
ModelLU951ST | 9H.JJ777.15E
Productvideo projector
EAN4718755074523
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Matrix size0.47 "
Matrix typeDMD
Projector brightness5000 ANSI lumens
Projection technologyDLP
Projector native resolutionWUXGA (1920x1200)
Contrast ratio (typical)100000:1
Number of colors1.073 billion colors
Native aspect ratio16:10
Keystone correction, horizontal-30 - 30 °
Keystone correction, vertical-30 - 30 °
Screen size compatibility30 - 300 "
Projection distance- m
Vertical scan range24 - 120 Hz
Horizontal scan range15 - 102 kHz
Light source
Service life of light source20000 h
Light source typeLaser
Lens system
Zoom capabilityYes
Zoom ratio1.1:1
Zoom typeManual
FocusManual
Horizontal lens shift range-23 - 23 %
Vertical lens shift range-60 - 60 %
Throw ratio0.81 - 0.88:1
Focal length range8.6 - 9.4 mm
Aperture range (F-F)1.83 - 1.86
Design
Product colorBlack
Product typeStandard throw projector
LED indicatorsYes
Cable lock slotYes
Cable lock slot typeKensington
Market positioningPresentation
PlacementDesktop, Ceiling
Features
HDCPYes
On Screen Display (OSD)Yes
Air filterYes
Noise level37 dB
Noise level (economic mode)35 dB
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, PER, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power10 W
Ports & interfaces
HDBaseT portYes
DVI portNo
Component video (YPbPr/YCbCr) in0
Composite video in1
HDMI ports quantity4
VGA (D-Sub) ports quantity2
USB 2.0 ports quantity1
USB 2.0 Type-B ports quantity1
Audio (L/R) in1
Headphone outputs1
Microphone inYes
S-Video inputs quantity1
Serial interface typeRS-232
AC (power) inYes
12V triggerYes
PC in (D-Sub)Yes
Video
Full HDYes
3DYes
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Analog signal format systemNTSC, PAL, SECAM
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported 3D formatsFrame packing, Side by side, Top and bottom
Power
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)475 W
Power consumption (max)530 W
Power consumption (standby)0.5 W
Power consumption (network standby)2 W
Power consumption (economy mode)365 W
Auto power offYes
Weight & dimensions
Weight9400 g
Width490 mm
Height159 mm
Depth380 mm
Storage
Card reader integratedNo
Optical disc player typeNot included
Packaging content
Handheld remote controlYes
Cables includedAC
Batteries includedYes
Quick start guideYes
Warranty cardYes
Network
Wi-Fi-
Smart TVNo
Ethernet LANYes
Ethernet LAN (RJ-45) ports1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Operating altitude0 - 3000 m
Other features
RS-232 ports1
Display
Built-in display-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ LU951ST below.

What is the weight of the BenQ LU951ST?

The BenQ LU951ST has a weight of 9400 g.

What is the height of the BenQ LU951ST?

The BenQ LU951ST has a height of 159 mm.

What is the width of the BenQ LU951ST?

The BenQ LU951ST has a width of 490 mm.

What is the depth of the BenQ LU951ST?

The BenQ LU951ST has a depth of 380 mm.

Is the manual of the BenQ LU951ST available in English?

Yes, the manual of the BenQ LU951ST is available in English .

Is your question not listed? Ask your question here

No results