View the manual for the Beko WDJ 7523023 here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Beko WDJ 7523023 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Beko WDJ 7523023.
| Brand | Beko |
| Model | WDJ 7523023 |
| Product | washing machine |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko WDJ 7523023 below.
The washing label of your garment shows the recommended washing temperature.
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
To change the spin speed of the Beko WDJ 7523023 washing machine, follow these steps: 1. Select a program: Choose the desired washing program on the control panel. 2. Check the recommended spin speed: Once you have selected a program, the recommended spin speed for that program will be displayed on the Spin Speed indicator. 3. Adjust the spin speed: Press the Spin Speed Adjustment button to change the spin speed. The spin speed will decrease gradually with each press of the button. 4. Select the desired spin speed: Continue pressing the Spin Speed Adjustment button until you reach the desired spin speed. The spin speed can only be adjusted backwards, so if you want to increase the spin speed from the displayed value, you need to press the button multiple times until you reach the desired speed. 5. Optional settings: Depending on the model of the washing machine, you may also have the options for "Rinse Hold" and "No Spin" displayed on the control panel. These options allow you to further customize the spin cycle. Please note that the maximum spin speed may vary depending on the machine model and program selected.
The Beko WDJ 7523023 washing machine may make loud noise during operation due to various reasons. Here are some possible causes and troubleshooting steps to address the issue: 1. Uneven installation: Ensure that the washing machine is placed on a solid and level floor. Avoid placing it on a carpet with high pile or other surfaces that may cause instability. 2. Excessive load: Overloading the machine can lead to imbalance and noise. Make sure to follow the recommended load capacity mentioned in the user manual. 3. Foreign objects: Check the drum and the pockets of clothes for any foreign objects like coins, buttons, or small items that may cause noise during spinning. Remove any such objects before starting the machine. 4. Unbalanced load: If the load inside the drum is not distributed evenly, it can cause the machine to vibrate and produce noise. Try redistributing the load manually and ensure that the items are evenly spread. 5. Damaged or worn-out parts: If the above steps do not resolve the issue, there may be a problem with the machine's components. In such cases, it is recommended to contact the authorized service agent for inspection and repair. Remember to always refer to the user manual for specific instructions and safety precautions related to your Beko WDJ 7523023 washing machine.
To clean the filter of the Beko WDJ 7523023 washing machine, follow these steps: 1. Unplug the machine: Before cleaning the filter, make sure to unplug the washing machine from the power supply to ensure safety. 2. Open the filter cover: Locate the filter cover, which is usually located at the bottom front of the machine. Press the tab on the filter cover downwards and pull the cover out towards yourself to open it. 3. Drain the water: To prevent any water spillage, you need to drain the water from the machine. Pull out the emergency draining hose from its seat and place a large container at the end of the hose. Remove the plug at the end of the hose to drain the water into the container. Once the container is full, block the inlet of the hose by replacing the plug. Repeat this process until all the water is drained. 4. Remove and clean the filter: Turn and remove the pump filter. Clean any residues inside the filter as well as fibers around the pump impeller region. Ensure that the filter is thoroughly cleaned. 5. Replace the filter: After cleaning, place the filter back into its position. 6. Close the filter cover: Once the filter is replaced, close the filter cover by pushing it back into place. Regularly cleaning the filter helps maintain the performance and efficiency of the Beko WDJ 7523023 washing machine.
If the Beko WDJ 7523023 washing machine is not drying clothes properly, there could be several reasons. Here are some possible causes and troubleshooting steps: 1. Excessive laundry load: Avoid overloading the machine as it can affect the drying performance. Make sure to follow the recommended load capacity mentioned in the user manual. 2. Insufficient spin speed: Ensure that the laundry is spun at a higher spin speed during the washing step before drying. This helps to remove excess water from the clothes, improving the drying process. 3. Incorrect program selection: Check if the appropriate drying program is selected according to the type of laundry. Refer to the care labels on the clothes and choose the suitable program or consider using timed programs. 4. Blocked filter or drainage issues: Clean the filter regularly to prevent any blockages that may affect the drying performance. Also, ensure that the drainage system is clear and functioning properly. 5. Drying function not enabled: Verify that the drying function is selected after the washing program. Some models require the drying function to be manually activated. If the issue persists after following these steps, it is recommended to consult the authorized service agent for further assistance.
If the Beko WDJ 7523023 washing machine is not starting, there could be several reasons. Here are some possible causes and troubleshooting steps: 1. Check power supply: Ensure that the washing machine is properly plugged into a functioning power outlet. Check if there is power supply to the outlet by testing with another device. 2. Door not closed properly: Make sure that the door of the washing machine is fully closed and latched. The machine will not start if the door is not securely closed. 3. Program selection: Verify that the desired program is selected on the control panel. Ensure that all necessary settings, such as temperature and spin speed, are also properly set. 4. Delay start function: If the delay start function is activated, the machine will not start immediately. Check if the delay start function is enabled and adjust the settings accordingly. 5. Child lock function: If the child lock function is activated, the machine will not start. Check if the child lock function is enabled and disable it if necessary. If the issue persists after following these steps, it is recommended to contact the authorized service agent for further assistance.
Yes, the manual of the Beko WDJ 7523023 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Beko and is the answer not in the manual?
Question and answer
Number of questions: 3My washing machine won't turn on. I have checked fuse and tried holding the button in for 3 seconds but nothing is working.
i have difficulty opening the door at the end of a cycle
How do I dry only