Beko HCA92640BH manual

Beko HCA92640BH
9.3 · 2
PDF manual
 · 416 pages
English
manualBeko HCA92640BH

Manual

View the manual for the Beko HCA92640BH here, for free. This manual comes under the category exhaust hoods and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Beko HCA92640BH or do you need help? Ask your question here

Need help?

Do you have a question about the Beko and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
DylanApril 19, 2020

How much must this hood be above the the countertop of the kitchen please in cm ? Thanks

Beko HCA92640BH specifications

Below you will find the product specifications and the manual specifications of the Beko HCA92640BH.

General
BrandBeko
ModelHCA92640BH | HCA92640BH
Productexhaust hood
EAN8690842024627
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF), Energy label (PDF)
Performance
Maximum extraction power577 m³/h
Type of extractionDucted/Recirculating
Fluid dynamic efficiency classD
Lighting efficiency classA
Grease filtering efficiency classC
Number of speeds3
Noise level70 dB
Filtering
Grease filter typeMetal
Number of filters2 pc(s)
Washable filterYes
Lighting
Lighting positionFront
Design
Product colorBlack
Built-in displayYes
Housing materialGlass
Type-
Weight & dimensions
Width896 mm
Depth386 mm
Weight10400 g
Height (min)365 mm
Packaging data
Package width505 mm
Package depth995 mm
Package height465 mm
Package weight19500 g
Power
Energy efficiency classA
AC input voltage220-240 V
AC input frequency50 Hz
Annual energy consumption- kWh
Motor power- W
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko HCA92640BH below.

What is the weight of the Beko HCA92640BH?

The Beko HCA92640BH has a weight of 10400 g.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the width of the Beko HCA92640BH?

The Beko HCA92640BH has a width of 896 mm.

What is the depth of the Beko HCA92640BH?

The Beko HCA92640BH has a depth of 386 mm.

What energy label does the Beko HCA92640BH have?

The Beko HCA92640BH has energy label A.

Is the maximum extraction power of the Beko HCA92640BH 577 m³/h?

Yes, the maximum extraction power of the Beko HCA92640BH is 577 m³/h. This means that it has a relatively high capacity for removing smoke and odors from your kitchen.

Does the Beko HCA92640BH have a washable filter?

Yes, the Beko HCA92640BH has a washable filter. This is convenient for users as it allows for easy maintenance and cleaning of the filter, saving money on replacement filters.

What is the noise level of the Beko HCA92640BH?

The noise level of the Beko HCA92640BH is 70 dB. This is on the higher side compared to other exhaust hoods, so it may be slightly noisier during operation.

Is the housing material of the Beko HCA92640BH glass?

Yes, the housing material of the Beko HCA92640BH is glass. This gives it a sleek and modern appearance, adding a touch of elegance to your kitchen.

How many speeds does the Beko HCA92640BH have?

The Beko HCA92640BH has 3 speeds. This allows the user to adjust the extraction power based on their cooking needs, providing flexibility and control in the kitchen.

How can I adjust the speed settings of the Beko HCA92640BH exhaust hood according to vapour and odour intensity to save energy?

To adjust the speed settings of the Beko HCA92640BH exhaust hood for energy saving, follow these steps: 1. Use low speeds (1-2) for normal conditions. 2. Increase to high speed (3) for intense odors and vapors. 3. Adjust the speed settings according to the intensity of vapor and odor to save energy efficiently. 4. The hood's lamps are designed for illuminating the cooking area, avoid using them for environmental lighting to prevent unnecessary energy consumption. 5. Start the appliance by pressing the desired speed setting button (1st, 2nd, or 3rd stage). 6. For optimal performance, use low speeds under normal conditions and high speeds when dealing with strong odors and intense vapors. 7. Periodically clean the metal filters every 60 hours of operation or every 4 weeks based on usage frequency.

What should I do if the lamps on the hood are not illuminating the cooking area?

To troubleshoot if the lamps on your Beko HCA92640BH exhaust hood are not illuminating the cooking area, follow these steps: 1. Check the electrical connection to ensure the mains voltage is between 220 and 240 V. 2. Inspect the lamp switch to make sure it is in the "on" position. 3. Verify the lamps themselves to ensure they are functioning properly and illuminating. 4. If the lamps still do not illuminate, consider cleaning the grease filter, which should be done at least once a month under normal operating conditions. 5. Additionally, check the air discharge flue to ensure it is in the "on" position. 6. For models with carbon filters, remember to replace them every 3 months under normal conditions.

How should the hood be installed to ensure safety and prevent electric shock?

To install the Beko HCA92640BH exhaust hood safely and prevent electric shock, follow these steps: 1. Ensure the appliance is installed by a dealer, service center, or authorized specialist to avoid any danger from damage or power cable issues. 2. Use the hood only for its intended household applications and follow the instructions in the manual strictly. 3. Maintain a minimum distance of at least 50 centimeters between the supporting surface for cooking vessels on the hob and the lowest part of the hood. 4. Supervise children and individuals with reduced capabilities when using the appliance to ensure safe operation. 5. Do not allow children to play with the appliance or perform cleaning and maintenance without supervision. These steps will help you install the exhaust hood safely and reduce the risk of electric shock.

What accessories are required for installing the Beko HCA92640BH exhaust hood?

To install the Beko HCA92640BH exhaust hood, you will need the following accessories: 1. Hanger plate (Figure 1a-60) 2. Hanger plate (Figure 1a-90) 3. External flue connection plate (Figure 1b-60) 4. External flue connection plate (Figure 1b-90) 5. 150 mm plastic flue adapter with 3.5x9.5 screws included in the installation accessories 6. Ø 120 mm flue adapter (if using Ø 120 mm flue pipe) 7. 4.9x50 cross-head screws 8. 3.9x22 cross-head screws 9. Ø150 mm plastic flue Ensure to read the safety information in the user manual before starting the installation. Contact the nearest Authorized Service for assistance with the installation. Prepare the location and electrical installation of the hood as per the customer's responsibility. Follow the installation instructions carefully to avoid any issues.

Is the manual of the Beko HCA92640BH available in English?

Yes, the manual of the Beko HCA92640BH is available in English .

Is your question not listed? Ask your question here

No results