Beko DTLCE80051W manual

Beko DTLCE80051W
9 · 4
PDF manual
 · 24 pages
English
manualBeko DTLCE80051W

Dryer

User Manual

DTLCE80051B
EN
2960312635_EN/060420.0903

View the manual for the Beko DTLCE80051W here, for free. This manual comes under the category dryers and has been rated by 4 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Beko DTLCE80051W or do you need help? Ask your question here

Need help?

Do you have a question about the Beko and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 7
L
Leia December 11, 2022

my dryer when it is drying, the water is not going to the main reservoir, it is accumulating in the back, what should I do?

my dryer when it is drying, the water is not going to the main reservoir, it is accumulating in the back, what should I do?
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

To resolve the issue of water not going to the main reservoir in your Beko DTLCE80051W dryer, please follow these steps: 1. Check if the water tank is full. If it is, empty the water tank. 2. Inspect the water discharge hose to see if it has collapsed. If the dryer is connected directly to the water drain, check the water discharge hose. 3. If your dryer has a steam function and the steam symbol is flashing, the steam tank may be empty. Fill the steam tank with distilled or condensed water. 4. If the steam programs are not starting, the steam tank may be empty. Look for the steam tank warning icon on the screen and fill the steam tank until the steam icon goes off. 5. If wrinkles are not being removed with the wrinkle removing program (for dryers with a steam function), ensure that you have placed the specified amount of laundry and selected a program with a high amount of steam. Also, remove the laundry as soon as the program finishes and hang it out. 6. If the odor removal program (for dryers with an odor removal function) is not lessening the laundry odor, check if you have placed the specified amount of laundry and selected a program with a high amount of steam. 7. If the problem persists after following these instructions, please contact your vendor or an authorized service. Do not attempt to repair the dryer yourself. To drain the water tank after each drying cycle: 1. Carefully remove the water tank from the drawer or container. 2. Drain the water in the tank. If there is lint accumulation in the funnel of the water tank, clean it under running water. 3. Place the water tank back into its seat. Note: If you have the option for direct water draining, there is no need to empty the water tank. To clean the condenser: 1. Wait until the dryer cools down if a drying process has been carried out. 2. Open the door of the machine and unlock the 2 condenser locks after opening the kick plate. 3. Pull out the condenser and clean it by applying pressurized water with a shower armature. Wait until the water drains. 4. Place the condenser back into its housing and fasten the 2 locks securely. 5. Close the kick plate cover.

This answer is automatically generated
J
JacquiAugust 13, 2023

My machine keeps indicating the tank is full how and where do I empty the tank for a BikoDTLC100051W

My machine keeps indicating the tank is full how and where do I empty the tank for a BikoDTLC100051W
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To empty the water tank for the Beko DTLCE80051W dryer, please follow these steps: 1. Remove the water tank from the drawer or container carefully. 2. Drain the water in the tank. - If there is lint accumulation in the funnel of the water tank, clean it under running water. - Place the water tank back into its seat. Note: If you have the option for direct water draining, there is no need to empty the water tank. Please make sure to drain the water tank after each drying cycle to prevent any interruptions during subsequent cycles. For cleaning the condenser, it is recommended to do it after every 30 drying cycles or once a month. Here are the steps to clean the condenser: 1. If a drying process has been carried out, open the door of the machine and wait until it cools down. 2. Unlock the 2 condenser locks after opening the kick plate. 3. Pull out the condenser. 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser back in its housing. Fasten the 2 locks securely. 6. Close the kick plate cover.

This answer is automatically generated
S
Shaun LawrenceOctober 26, 2023

Programmes start only by pressing the buzzer button not start/pause button

F
Farhet AdamApril 23, 2023

Why wont my clothes dry

A
AdamNovember 2, 2022

Can the door be swapped around

P
Patrick Doherty October 23, 2023

Only works for short time

V
V. LawtonNovember 2, 2022

Timer delay function

The Beko DTLCE80051W is a freestanding condensation dryer with a rated capacity of 8 kg. It has an energy efficiency class of B, with an annual energy consumption of 561.1 kWh. This places it on the lower end of the energy efficiency scale, which ranges from A+++ to D. The dryer's cycle time is 142 minutes, providing efficient drying for a variety of loads. Featuring a right-hinged opaque door, the Beko DTLCE80051W offers a sleek and modern design. However, it does not have reversible doors. With a noise level of 66 dB, the dryer operates at a moderately quiet level, minimizing any disturbances during use. The drying class of the Beko DTLCE80051W is B, indicating its ability to effectively dry different types of garments. The condensation drying system efficiently removes moisture from clothes, leaving them ready for immediate use or further handling. This system offers convenience for users in need of quick and efficient drying. With its freestanding placement, the Beko DTLCE80051W can be easily installed in a variety of spaces. The dryer is constructed with quality materials, ensuring reliability and long-lasting durability. In summary, the Beko DTLCE80051W is a freestanding condensation dryer with a rated capacity of 8 kg. Offering a sleek design and efficient drying, this dryer is suitable for a range of laundry needs. While it is not the most energy-efficient option, it provides reliable performance and convenient features.

General
BrandBeko
ModelDTLCE80051W | DTLCE80051W
Productdryer
EAN8690842348433
LanguageEnglish
FiletypeUser manual (PDF)
Power
Energy efficiency classB
Energy efficiency scaleA+++ to D
Annual energy consumption561.1 kWh
Heat source-
Energy consumption4.75 kWh
Power consumption (off)0.5 W
Power consumption (left-on)1 W
Connected load2700 W
Heater power2300 W
AC input voltage230 - 240 V
AC input frequency50 Hz
13 A
Current11.5 A
Performance
Cycle time142 min
Drum capacity8 kg
Noise level66 dB
Drying classB
Moisture sensorYes
Number of drying programs15
Extra dryYes
Baby care, BabyProtect+, Cotton cupboard dry, Cotton eco, Cotton extra dry, Cotton iron dry, Daily, Gentle care, Jeans/denim, Mix, Outdoor/sport, Synthetics cupboard dry, Synthetics iron dry, Wool refresh, Xpress super short
Left-on mode duration30 min
Anti-Crease functionYes
Ambient temperature (min)5 °C
2.53 kWh
80 min
81 %
81 %
107 min
Number of drying levels3
Safety cut outYes
Yes
Ambient temperature (max)40 °C
Energy consumption per cycle (full load)4.75 kWh
B
Weighted condensation efficiency81 %
Number of temperature settings2
Yes
Design
Appliance placementFreestanding
Loading typeFront-load
Drying systemCondensation
Product colorWhite
Door hingeRight
Door styleOpaque door
Door colorWhite
Reversible doorsNo
Control typeButtons, Rotary
Built-in displayNo
Door opening angle155 °
Lower built-in capability (topless)Yes
Yes
Weight & dimensions
Width597 mm
Depth568 mm
Height846 mm
Weight31500 g
Ergonomics
Remaining time indicationNo
Drum interior lightNo
Child lockYes
Filter cleaning indicatorYes
Water tank full indicatorYes
BuzzerYes
Delayed start timerYes
Delay start (max)9 h
Wi-Fi controlled-
Near Field Communication (NFC)-
Self-cleaning-
LED program stage indicatorYes
Front & Rear
Feet adjustment15 mm
Adjustable feetYes
No
3 h
4
Yes
Buzzer offYes
Top
Yes
0 mm
Sensor
Automatic controlYes
Cycle time (full load)142 min
Packaging data
Package width650 mm
Package depth585 mm
Package height880 mm
Package weight32500 g
Direct drain hose includedYes
Technical details
Water reservoir locationTop
Outlet water hoseYes
Outlet hose length1.3 m
Required toolsStandard tool box
Required own (furniture) doorNo
Yes
7 year(s)
Logistics data
Harmonized System (HS) code84512100
Commodity Classification Automated Tracking System (CCATS)84512100
Expanded Polystyrene (EPS) packaging weight666 g
Plastic packaging weight201 g
Other features
Can be installed under worktopYes
Brand-specific features
Automatic Anti-Creasing Function
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko DTLCE80051W below.

What is a condenser dryer?

A condenser dryer is a dryer in which condensation ends up in a reservoir.

What is a drain dryer?

A drain dryer is a dryer in which the warm air and condensation are drained through a hose.

What is the best thing to do about a smelly dryer?

It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.

There is a burning smell from my dryer, now what?

Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.

What is the weight of the Beko DTLCE80051W?

The Beko DTLCE80051W has a weight of 31500 g.

What is the height of the Beko DTLCE80051W?

The Beko DTLCE80051W has a height of 846 mm.

What is the width of the Beko DTLCE80051W?

The Beko DTLCE80051W has a width of 597 mm.

What is the depth of the Beko DTLCE80051W?

The Beko DTLCE80051W has a depth of 568 mm.

What energy label does the Beko DTLCE80051W have?

The Beko DTLCE80051W has energy label B.

Why is my dryer not starting?

Make sure the power cord is securely plugged into a functioning electrical outlet. Additionally, ensure that the door is closed properly and the start button is pressed firmly.

Why is my dryer not heating up?

Confirm that the dryer is set to an appropriate heat setting. Ensure that the lint filter and air vents are clean and free from obstructions. Also, make sure the load size is not too large, as it may prevent proper heating.

Why is my dryer taking longer than usual to dry clothes?

Check that the selected drying program matches the type and weight of the load. Ensure that the lint filter and air vents are clean to promote efficient airflow. It is also important not to overload the dryer, as it can affect drying time.

What should I do if my dryer is producing excessive noise?

First, ensure that the dryer is placed on a flat, stable surface to minimize vibrations. Check for any objects or loose items inside the drum that may be causing the noise. If the noise persists, contact a service technician to inspect the dryer's motor or other internal components.

How can I prevent excessive wrinkling of my clothes in the dryer?

Make sure to promptly remove clothes from the dryer once the cycle is complete to minimize wrinkles. Select the appropriate drying program, considering the fabric type and desired level of dryness. Utilizing the anti-crease or delicate options, if available, can also help reduce wrinkling.

Is the energy efficiency rating of the Beko DTLCE80051W good?

The energy efficiency scale of the Beko DTLCE80051W ranges from A+++ to D, with A+++ being the highest rating. It is not specified where this model falls within the scale, but a higher rating would mean it consumes less energy, which is beneficial for the user in terms of cost savings and environmental impact.

Does the Beko DTLCE80051W have a high annual energy consumption?

The annual energy consumption of the Beko DTLCE80051W is 561.1 kWh. Without a point of reference, it is difficult to determine if this is high or low. However, users may consider comparing it with other models to see where it stands in terms of energy efficiency.

How long does a typical drying cycle take for the Beko DTLCE80051W?

The cycle time for the Beko DTLCE80051W is 142 minutes. This provides an indication of the drying speed, and users can assess whether it aligns with their expectations and needs.

What is the rated capacity of the Beko DTLCE80051W?

The Beko DTLCE80051W has a rated capacity of 8 kg. This means it can accommodate a significant amount of laundry in one load, making it suitable for larger households or individuals with more laundry needs.

Is the noise level of the Beko DTLCE80051W high or low?

The noise level of the Beko DTLCE80051W is 66 dB. While it is difficult to determine if this is high or low without a reference, users may prefer to consider quieter options, especially if the dryer is located near living or sleeping areas.

Is the manual of the Beko DTLCE80051W available in English?

Yes, the manual of the Beko DTLCE80051W is available in English .

Is your question not listed? Ask your question here

No results