View the manual for the Beko DTLCE70051W here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Beko DTLCE70051W or do you need help? Ask your question here




The Beko DTLCE70051W is a freestanding dryer equipped with a condensation drying system. With an energy efficiency class of B, it falls within the A+++ to D energy efficiency scale. The dryer has an annual energy consumption of 504.2 kWh, making it moderately efficient in terms of energy usage. Featuring a rated capacity of 7 kg, the Beko DTLCE70051W is suitable for drying moderate amounts of laundry. Its cycle time is approximately 121 minutes, providing reasonable efficiency in completing a drying cycle. Operating at a noise level of 65 dB, this dryer emits moderate noise during operation, which can be considered within an acceptable range. Its drying class is classified as B, indicating its ability to effectively dry garments without excessive humidity. The Beko DTLCE70051W is equipped with both buttons and a rotary control type, allowing users to easily navigate through various settings and adjust the drying process according to their preferences. Its door hinge is located on the right side, and the door style features an opaque design, providing privacy during the drying cycle. However, the door is not reversible, limiting flexibility in terms of installation options. Overall, the Beko DTLCE70051W is a reliable and durable dryer, designed to efficiently dry moderate-sized laundry loads. Its condensation drying system and energy efficiency class of B contribute to a balanced performance, ensuring effective drying while considering energy consumption. With its user-friendly control options and reasonable cycle time, this freestanding dryer offers convenience and functionality for everyday laundry needs.

| Brand | Beko |
| Model | DTLCE70051W | DTLCE70051W |
| Product | dryer |
| EAN | 8690842337956 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
| Energy efficiency class | B |
| Energy efficiency scale | A+++ to D |
| Annual energy consumption | 504.2 kWh |
| Energy consumption | 4.21 kWh |
| Power consumption (off) | 0.5 W |
| Power consumption (left-on) | 1 W |
| Heat source | - |
| Connected load | 2700 W |
| Heater power | 2300 W |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| 13 A | |
| Current | 11.5 A |
| Cycle time | 121 min |
| Drum capacity | 7 kg |
| Noise level | 65 dB |
| Drying class | B |
| Moisture sensor | Yes |
| Anti-Crease function | Yes |
| Number of drying programs | 15 |
| Extra dry | Yes |
| Baby care, BabyProtect+, Cotton cupboard dry, Cotton eco, Cotton extra dry, Cotton iron dry, Daily, Gentle care, Jeans/denim, Mix, Outdoor/sport, Synthetics cupboard dry, Synthetics iron dry, Wool refresh, Xpress super short | |
| Left-on mode duration | 30 min |
| Ambient temperature (min) | 5 °C |
| 2.31 kWh | |
| 72 min | |
| 81 % | |
| 81 % | |
| 93 min | |
| Number of drying levels | 3 |
| Weighted condensation efficiency | 81 % |
| Yes | |
| Safety cut out | Yes |
| B | |
| Number of temperature settings | 2 |
| Yes | |
| Ambient temperature (max) | 40 °C |
| Energy consumption per cycle (full load) | 4.21 kWh |
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Drying system | Condensation |
| Product color | White |
| Door hinge | Right |
| Door style | Opaque door |
| Reversible doors | No |
| Control type | Buttons, Rotary |
| Built-in display | No |
| Door color | White |
| Door opening angle | 155 ° |
| Lower built-in capability (topless) | Yes |
| Yes |
| Width | 597 mm |
| Depth | 568 mm |
| Height | 846 mm |
| Weight | 32000 g |
| Remaining time indication | No |
| Drum interior light | No |
| Child lock | Yes |
| Water tank full indicator | Yes |
| Buzzer | Yes |
| Delayed start timer | Yes |
| Delay start (max) | 9 h |
| Near Field Communication (NFC) | - |
| Wi-Fi controlled | - |
| Self-cleaning | - |
| Filter cleaning indicator | Yes |
| LED program stage indicator | Yes |
| Front & Rear | |
| Feet adjustment | 15 mm |
| Sensor | |
| Buzzer off | Yes |
| Yes | |
| 3 h | |
| Adjustable feet | Yes |
| Yes | |
| 0 mm | |
| Top | |
| No | |
| 4 | |
| Cycle time (full load) | 121 min |
| Automatic control | Yes |
| Package width | 650 mm |
| Package depth | 585 mm |
| Package height | 880 mm |
| Package weight | 33000 g |
| Direct drain hose included | Yes |
| Water reservoir location | Top |
| Outlet water hose | Yes |
| Outlet hose length | 1.3 m |
| 7 year(s) | |
| Required own (furniture) door | No |
| Yes | |
| Required tools | Standard tool box |
| Harmonized System (HS) code | 84512100 |
| Commodity Classification Automated Tracking System (CCATS) | 84512100 |
| Expanded Polystyrene (EPS) packaging weight | 666 g |
| Plastic packaging weight | 201 g |
| Automatic Anti-Creasing Function |
| Can be installed under worktop | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko DTLCE70051W below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
The Beko DTLCE70051W has a weight of 32000 g.
The Beko DTLCE70051W has a height of 846 mm.
The Beko DTLCE70051W has a width of 597 mm.
The Beko DTLCE70051W has a depth of 568 mm.
The Beko DTLCE70051W has energy label B.
Yes, the Beko DTLCE70051W is energy-efficient as it is rated A+++ on the energy efficiency scale, which is the highest rating available. This means that it consumes less energy and can help users save on their electricity bills compared to lower-rated dryers.
The Beko DTLCE70051W consumes 504.2 kWh of energy annually. This is a moderate energy consumption level compared to other dryers, but its A+++ energy efficiency rating ensures that it minimizes energy waste.
A drying cycle with the Beko DTLCE70051W takes 121 minutes. This is a relatively average cycle time compared to similar products on the market.
The Beko DTLCE70051W has a rated capacity of 7 kg. This means that it can handle up to 7 kilograms of laundry in a single drying cycle.
No, the Beko DTLCE70051W has a noise level of 65 dB. This is considered to be a moderate noise level for a dryer. While it may not be the quietest option available, it is still within an acceptable range and should not cause significant disturbance to the user.
To adjust the drying time and temperature settings on the Beko DTLCE70051W dryer, follow these steps: 1. Turn on the dryer by pressing the power button. 2. Open the loading door and place your laundry inside the drum. 3. Select the desired drying program by turning the program selection knob. The available programs may include options such as Cottons, Synthetics, Delicates, or Mixed Fabrics. 4. Once you have selected the program, you can adjust the drying time and temperature settings. 5. To adjust the drying time, use the time delay button. Press the button once for a 3-hour delay, twice for a 6-hour delay, and three times for a 9-hour delay. If you want to start the program immediately, do not press the time delay button. 6. To adjust the temperature settings, refer to the program settings on the control panel. Some programs may have predefined temperature settings, while others may allow you to select a specific temperature using the temperature control buttons. 7. After adjusting the drying time and temperature settings, press the "Start/Pause" button to begin the drying cycle. 8. The drying indicator will light up, indicating that the program has started. 9. If you need to make any changes to the program after it has started, such as selecting a different program or adding/removing clothes, press the "Start/Pause" button to pause the cycle, make the necessary adjustments, and then press the button again to resume the program. Remember to consult the user manual for specific instructions and program options for the Beko DTLCE70051W dryer.
If the Beko DTLCE70051W dryer does not start when you press the power button, follow these steps to troubleshoot the issue: 1. Check if the power plug is properly plugged into the electrical outlet. Ensure that the power cord is securely connected. 2. Make sure that the loading door is completely closed. Push the door until you hear a closing sound. 3. Verify that a program is set and the Start/Stand-by button is pressed. Ensure that the program is not in Stand-by position. 4. Check if the child lock is activated. If it is, turn off the child lock according to the instructions in the manual. 5. If the dryer still does not turn on, there might be a power outage. Press the Start/Stand-by button to start the program once the power is restored. 6. If none of the above steps resolve the issue, it is recommended to contact an authorized service center for further assistance. Please note that these troubleshooting steps are based on general guidelines and may vary depending on the specific model of the Beko DTLCE70051W dryer. For more detailed instructions and model-specific troubleshooting, refer to the user manual.
To properly unpack and install the Beko DTLCE70051W dryer, follow these steps: 1. Unpacking: - Carefully remove the packaging materials from the dryer. - Check for any visible signs of damage. If you notice any, contact the retailer or Beko customer service. - Remove any protective films or stickers from the dryer's surface. 2. Installation: - Choose a suitable location for the dryer, ensuring it is on a flat and stable surface. - Leave enough space around the dryer for proper ventilation and access to the controls. - Connect the dryer to a grounded electrical outlet using the provided power cord. - Make sure the power cord is not twisted or damaged. - If necessary, connect the dryer to a suitable exhaust vent to ensure proper air circulation. - Ensure that the exhaust vent is clean and free from any obstructions. - Double-check all connections to ensure they are secure. 3. Leveling: - Use a spirit level to check if the dryer is level. - Adjust the leveling feet if needed to ensure stability and proper operation. 4. Final Checks: - Before using the dryer, make sure the lint filter is clean and properly inserted. - Review the user manual for specific instructions on operating the dryer. By following these steps, you can properly unpack and install the Beko DTLCE70051W dryer for optimal performance.
If you cannot find the product model and serial number of the Beko DTLCE70051W dryer, follow these steps: 1. Check the Operating Instruction Booklet or User Guide that came with the dryer. The product model number and serial number are usually printed on these documents. 2. Look for the Rating Label affixed to the appliance. The product model and serial number can be found on this label. 3. If you have a purchase receipt or other proof of purchase paperwork, check for the Retailer (Purchased from) and Date of purchase information. These details may also be required for service or warranty purposes. 4. If you are still unable to locate the model and serial number, you can visit the Beko website and use their model finder tool for assistance. The website address is beko.co.uk/support/model-finder. 5. If you need further help or have any questions, you can contact the Beko Contact Centre. The phone number for UK Mainland & Northern Ireland is 0333 207 9710, and for the Republic of Ireland, it is 01 862 3411. By following these steps, you should be able to find the product model and serial number of the Beko DTLCE70051W dryer.
To contact the Beko contact centre for assistance with the Beko DTLCE70051W dryer, follow these steps: 1. Locate the contact information for the Beko contact centre. You can find the contact details on the Beko website or in the product documentation that came with the dryer. 2. Note down the phone number or email address provided for customer support or technical assistance. 3. Dial the phone number provided to reach the Beko contact centre. Alternatively, you can send an email to the designated email address. 4. When contacting the Beko contact centre, be prepared to provide relevant information about your Beko DTLCE70051W dryer, such as the model number, serial number, and a description of the issue or question you have. 5. Communicate your query or concern clearly and provide any necessary details requested by the customer support representative. 6. Follow any instructions or troubleshooting steps provided by the Beko contact centre to resolve the issue or address your question. By following these steps, you can easily contact the Beko contact centre for assistance with your Beko DTLCE70051W dryer.
The symbols used in the manual of the Beko DTLCE70051W dryer have the following meanings: 1. On/Off/Programme selection button: This button is used to turn the dryer on or off and to select the desired drying program. 2. Start/Pause button: Pressing this button starts or pauses the drying cycle. 3. Time Delay button: This button allows you to set a delay for the start of the drying program, such as 3, 6, or 9 hours. 4. Audio warning level button: This button adjusts the volume of the audio signals or alerts from the dryer. 5. Filter cleaning: This symbol indicates that it is time to clean the lint filter to maintain optimal drying performance. 6. Tank full: This symbol indicates that the water tank needs to be emptied if your dryer has a condenser drying system. 7. Child-proof lock: This symbol indicates that the child lock feature is activated, preventing accidental changes to the settings. 8. Mute: This symbol indicates that the audio signals or alerts from the dryer are muted. 9. Filter drawer/Heat exchanger cleaning: This symbol indicates that it is time to clean the filter drawer or heat exchanger to ensure efficient drying. 10. End/anti-creasing: This symbol indicates the end of the drying cycle and activates the anti-creasing function to reduce wrinkles in the clothes. These symbols are used to represent different functions and notifications on the control panel of the Beko DTLCE70051W dryer.
To troubleshoot if the Beko DTLCE70051W dryer is not drying clothes properly, follow these steps: 1. Check the fibre filter: If the drying operation takes too long or the clothes come out damp, the fibre filter may be clogged. Wash the filter with warm water to remove any lint or debris. 2. Clean the filter drawer or condenser: If the drying time is prolonged or the clothes are not drying properly, the filter drawer or condenser may be blocked. Clean the sponge and filter cloth (if applicable) in the filter drawer or wash the condenser to ensure proper airflow. 3. Ensure proper ventilation: Make sure the ventilation grills in front of the dryer are not blocked by any objects. If the dryer is installed in a small area, open doors or windows to improve ventilation and prevent the room temperature from rising too high. 4. Check the laundry load: Avoid overloading the dryer with excessive laundry, as this can affect drying performance. Ensure that the laundry has been adequately wrung out before placing it in the dryer. 5. Select the appropriate program: Use a program suitable for the type of laundry being dried. Check the maintenance labels on the clothes for guidance or use time programs as an extra option. 6. Contact authorized service: If the issue persists or if you require further assistance, contact an authorized service center for professional help. By following these troubleshooting steps, you can address common issues related to the drying performance of the Beko DTLCE70051W dryer.
If you encounter an error code on the display of the Beko DTLCE70051W dryer, follow these steps to troubleshoot the issue: 1. Identify the specific error code displayed on the dryer's control panel. Each error code corresponds to a specific issue or malfunction. 2. Refer to the user manual for the Beko DTLCE70051W dryer to find the corresponding error code and its meaning. The manual provides a list of error codes and their explanations. 3. Once you have identified the error code and its meaning, take the appropriate action as suggested in the manual. This may involve checking certain components, performing specific troubleshooting steps, or contacting the Beko contact centre for further assistance. 4. If the error persists after following the recommended troubleshooting steps, it is advisable to contact the Beko contact centre for professional support. They will be able to provide further guidance and arrange for any necessary repairs or service. Please note that the specific error codes and troubleshooting steps may vary depending on the model and version of the Beko DTLCE70051W dryer. Refer to the user manual for accurate and detailed information related to the error codes specific to your dryer.
To clean and maintain the Beko DTLCE70051W dryer for optimal performance, follow these steps: 1. Clean the lint filter after every use. Remove any lint or debris from the filter by hand or using a soft brush. This helps maintain proper airflow and prevents lint buildup. 2. Regularly clean the filter drawer or heat exchanger, depending on the dryer model. Follow the instructions in the manual to remove and clean these components to ensure efficient drying. 3. Check the condenser (if applicable) and clean it as needed. Remove any lint or debris from the condenser unit to maintain proper airflow and prevent clogging. 4. Wipe the exterior of the dryer with a soft, damp cloth to remove any dust or stains. Avoid using abrasive cleaners or solvents that may damage the surface. 5. Inspect the ventilation grills and ensure they are free from obstructions. Clear any dust or debris that may accumulate on the grills to maintain proper airflow. 6. Periodically check the power cord and plug for any damage. If any issues are found, contact a qualified electrician for repairs or replacement. By following these steps, you can effectively clean and maintain the Beko DTLCE70051W dryer, ensuring optimal performance and prolonging its lifespan.
If the Beko DTLCE70051W dryer is making unusual noises during operation, follow these steps to address the issue: 1. Check for any loose objects: Ensure that there are no loose items, such as buttons, coins, or small objects, in the drum or filter area. Remove any foreign objects that may be causing the noise. 2. Verify the load balance: Unevenly distributed laundry can cause the dryer to make noise. Stop the dryer, rearrange the load, and ensure that the laundry is evenly distributed inside the drum. 3. Inspect the drum for damage: Examine the drum for any signs of damage, such as dents or cracks. If you notice any damage, contact the Beko contact centre or an authorized service center for further assistance. 4. Check the leveling of the dryer: Ensure that the dryer is level and stable on the floor. Adjust the leveling feet if necessary to eliminate any rocking or instability. 5. Clean the lint filter and condenser: A clogged lint filter or condenser can cause the dryer to make unusual noises. Clean the lint filter and condenser according to the instructions provided in the manual. 6. Contact the Beko contact centre: If the noise persists or if you are unsure about the cause, it is recommended to contact the Beko contact centre for further guidance and assistance. By following these steps, you can address the issue of unusual noises coming from the Beko DTLCE70051W dryer during operation.
Yes, the manual of the Beko DTLCE70051W is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Beko and is the answer not in the manual?
Question and answer
Number of questions: 7How can I change the control panel? I want to change the right side of the screen to "cupboard dry" (the third symbol), but I'm not sure how.
Biko DTLV700441W vented tumble dryer Why is top middle button lit up on control panel panel and dryer won’t start
1 comment
The top middle button on the control panel of the Beko DTLCE70051W dryer is the Start/Pause button. If this button is lit up and the dryer won't start, there may be a few possible reasons: 1. Check if the door is properly closed. The dryer will not start if the door is not securely closed. 2. Ensure that the water tank is not full. If the water tank is full, the dryer will not start. Empty the water tank and try again. 3. Check if the filter drawer or heat exchanger needs cleaning. If the cleaning symbol for the filter drawer or heat exchanger is lit up, clean them according to the instructions. 4. Make sure the child lock is not activated. If the child lock is activated, the buttons on the control panel will be deactivated. Deactivate the child lock by pressing the End Time and Buzzer buttons simultaneously for 3 seconds.
This answer is automatically generatedWhy does my dryer keep powering of after about 15 minutes done all the cleaning on it
what recess space does the BEKO DTLCE70051 require
Beko dryer DTLCE70051W which setting is appropriate for low heat please? Also in the future, including into the manual the laundry symbols that correlate to the specific Beko wash/sry panic would be appreciated..
How to select low temperature
how to set temp