View the manual for the Beko DTGC 7000 B here, for free. This manual comes under the category dryers and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Beko DTGC 7000 B or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Beko DTGC 7000 B.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko DTGC 7000 B below.
A condenser dryer is a dryer in which condensation ends up in a reservoir.
A drain dryer is a dryer in which the warm air and condensation are drained through a hose.
It is best to wipe the dryer drum with a damp cloth and some lemon cleaner.
Check the following: - That the fluff filter is clean. - That the bottom of the dryer is free of dust. - That the drain hose is clean. If the above does not help, a mechanic should be called in.
To select a program on the Beko DTGC 7000 B dryer, follow these steps: 1. Press the Start/Stand-by button to start the program. The Drying indicator will light up, indicating that the program has started. 2. If you want to change the program after it has started, turn the On/Off/Program selection knob to select a different program, such as Extra Dry instead of Iron Dry. 3. Press the Start/Stand-by button to confirm the new program selection. 4. To add or remove clothes during the drying program, press the Start/Stand-by button to put the dryer in Stand-by state. Open the loading door, make the necessary changes, and then press the Start/Stand-by button to resume the program. 5. Remember that adding or removing laundry during drying may increase program duration and energy consumption, so it's recommended to add laundry before the program starts.
To troubleshoot if the Beko DTGC 7000 B dryer does not turn on after plugging it in, follow these steps: 1. Ensure the power plug is securely plugged in. 2. Check that the loading door is properly closed. 3. Verify that a program is set and press the Start/Stand-by button. 4. Turn off the child lock if activated. 5. If the lighting inside the dryer does not turn on, make sure the dryer is turned on and the program is selected. 6. If the dryer still does not turn on, contact Authorized Service for further assistance. If the issue persists after following these steps, seek help from your vendor or an Authorized Service. Avoid attempting to repair the dryer yourself.
Yes, the manual of the Beko DTGC 7000 B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Beko and is the answer not in the manual?
Question and answer
Number of questions: 0