Beko DFS05011W manual

Beko DFS05011W
8.1 · 6
PDF manual
 · 32 pages
English
manualBeko DFS05011W
7
EN
3

Installation

Refer to the nearest Authorised
Service Agent for installation of your
product. To make the product ready
for use, make sure that the electricity,
tap water supply and water drainage
systems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.

C Preparation of the location and

electrical, tap water and waste
water installations at the place of
installation is under customer's
responsibility.

B Installation and electrical

connections must be carried out
by the Authorised Service Agent.
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorised persons.

B Prior to installation, visually check

if the product has any defects on
it. If so, do not have it installed.
Damaged products cause risks for
your safety.

A Make sure that the water inlet and

discharge hoses are not folded,
pinched or crushed while pushing
the product into its place after
installation or cleaning procedures.
When placing the product, pay
attention not to damage the floor,
walls, piping, etc. Do not hold the
product from its door or panel to
move it.

Appropriate installation

location

• Place the product on a solid and

at oor that has sufficient load
carrying capacity! The product
must be installed on a at surface
in order for the door to be closed
comfortably and securely.

• Do not install the product at places

where temperature may fall below
0ºC.

• Place the product at least 1 cm

away from the edges of other
furniture.

• Place the product on a rigid oor.

Do not place it on a long pile rug
or similar surfaces.

A Do not place the product on the

power cable.

• Make sure that you select a

location that will allow you to load
and unload the dishes in a fast
and comfortable manner.

• Install the product in a place close

to the tap and the drain hole.
Select the installation location
by considering that it will not be
changed after the connections are
made.

Connecting water supply

C We recommend attaching a filter

on the house/apartment supply
water inlet to protect the machine
from damages that may arise
from impurities (sand, dirt, rust,
etc.) coming from the urban water
supply system or from your own
water system as well as to prevent
complaints such as yellowing or
sludge accumulation at the end of
washing.

View the manual for the Beko DFS05011W here, for free. This manual comes under the category Dishwashers and has been rated by 6 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Beko DFS05011W or do you need help? Ask your question here

Need help?

Do you have a question about the Beko and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Beko owners to provide you with a good answer.

Number of questions: 0

General
Beko
DFS05011W | DFS05011W
Dishwasher
8690842018428
English
User manual (PDF)
Design
Appliance placementFreestanding
Door colourWhite
Control typeButtons, Rotary
Built-in display
Upper basket adjustable height
Cutlery compartment typeBasket
Tub materialStainless steel
Product sizeFull size (60 cm)
Control panel colourWhite
Performance
Number of place settings10 place settings
Noise level49 dB
Number of washing programs5
Temperature (max)70 °C
Cycle time200 min
Delayed start timer
Dishwashing programsEco, Intensive, Quick
Overflow protection
Delay start (max)9 h
Number of temperature settings5
Half-load
Other features
Drying classA
Annual energy consumption237 kWh
Annual water consumption3640 L
Washing classA
Ergonomics
Automatic detergent detection
Salt indicator
Rinse aid indicator
Power
Energy efficiency class (old)A+
Energy consumption per cycle0.83 kWh
Water consumption per cycle13 L
Connected load2200 W
Power consumption (off)0.08 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Current10 A
Weight & dimensions
Width448 mm
Depth598 mm
Height850 mm
Weight38900 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko DFS05011W below.

Is your question not listed? Ask your question here

No results