This product complies with the following EU directives:
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.
2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242
Power input220-240 V, 50 Hz
Total power consumption1900-2200 W
Heater power consumption1800 W
Total current
(depends on the model)
10 A (see type plate)
Drain pump power
consumption
30 W
Water pressure0.3 –10 bar (= 3 – 100 N/cm² = 0.03-1.0 Mpa)
C Technical specifications may be changed without prior notice to improve the
quality of the product.
C Figures in this manual are schematic and may not match the product exactly.
C Values stated on the product labels or in the documentation accompanying
it are obtained in laboratory conditions in accordance with the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests
can be e-mailed to the following address:
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product is located on the type label attached to the side of
the door.
dishwasher@standardloading.com
View the manual for the Beko DFS05011W here, for free. This manual comes under the category Dishwashers and has been rated by 6 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Beko DFS05011W or do you need help? Ask your question here
Do you have a question about the Beko and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Beko owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Beko DFS05011W below.
What do I do about a smelly dishwasher?
In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner
Do you have to pre-rinse the dishes?
It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.
How much dishwashing detergent should I use?
The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.
How do I add softening salt to my dishwasher?
Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.
What is the weight of the Beko DFS05011W?
The Beko DFS05011W has a weight of 38900 g.
What is the height of the Beko DFS05011W?
The Beko DFS05011W has a height of 850 mm.
What is the width of the Beko DFS05011W?
The Beko DFS05011W has a width of 448 mm.
What is the depth of the Beko DFS05011W?
The Beko DFS05011W has a depth of 598 mm.
Is the manual of the Beko DFS05011W available in English?
Yes, the manual of the Beko DFS05011W is available in English .
Need help?
Do you have a question about the Beko and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Beko owners to provide you with a good answer.
Number of questions: 0