Bauknecht GTE 2805 A3+ manual

Bauknecht GTE 2805 A3+
9.6 · 2
PDF manual
 · 34 pages
English
manualBauknecht GTE 2805 A3+
q et
y
i
w
r
u
1
345
2
6
89
CLASE/KLASSE
CLASSE/CLASS
°C °F
SN 10 - 32 50 - 90
N 16 - 32 61 - 90
ST 16 - 38 61 - 100
T 16 - 43 61 - 110
7

5019 613 01315/A

INSTRUCTIONS FOR USE

GB
DIAGRAM OF THE APPLIANCE (Fig. 1)
A. Handle.
B. Safety lock (if provided).
C. Gasket.
D. Separator (if provided).
E. Defrost water drain plug.
F. Control panel.
G. Side motor cooling grille.
DIAGRAM OF THE CONTROL PANEL (Fig. 2)
1. Digital temperature display: indicates the
temperature inside the freezer (fixed display) or the
set temperature (blinking display).
2. Decrease temperature button: this button lowers
the temperature.
3. Increase temperature button: this button raises the
temperature.
4. "Extra load" button: activates/deactivates the large
load function.
5. "Extra load" LED (yellow): indicates, when lit, that
the large load function has been selected.
6. "Green Intelligence" LED (blue): indicates, when lit,
that the “Green Intelligence” function is active (see
paragraph “Green Intelligence function”).
7. Alarm reset button: stops the acoustic alarm and
the power failure alarm LED (see paragraph "Alarms").
8. Alarm LED (red): blinks when an alarm condition
occurs (see paragraph "Alarms").
BEFORE USING THE APPLIANCE
Your new appliance is designed to be used in the
household and similar applications such as:
- kitchen areas in shops, offices and other working
environments
- farm houses
- by clients in hotels, motels, residences, bed &
breakfasts.
The product must only be used to store frozen food, to
freeze fresh food and to make ice.
Regulations require the appliance to be earthed.
The manufacturer declines all liability for injury to
persons or animals and for damage to property
resulting from failure to observe the above
procedures and reminders.
1. After unpacking, make sure that the appliance is
undamaged and that the door closes perfectly, with the
gasket remaining intact. Any damage must be reported
to your retailer within 24 hours after delivery of the
appliance.
2. Wait at least two hours before switching the appliance
on in order to ensure the refrigerant circuit is fully
efficient.
3. Installation and electrical connection must be carried
out by a qualified technician, according to the
manufacturer's instructions and local safety regulations.
4. Clean the inside of the appliance before using it.
• Before connecting the appliance to the mains supply,
ensure that the voltage corresponds to that given on
the rating plate located on the rear of the appliance.
• Electrical connections must be made in
accordance with local regulations.
INSTALLATION
Unpack the appliance.
Remove the 4 spacers inserted between the door
and the appliance. (Fig 3)
Make sure the defrost water drain plug (if provided) is
correctly positioned (E).
For optimum appliance operation and to avoid damage
when the door is opened, leave a space of at least 7 cm
from the rear wall and 7 cm at the sides. (Fig 4)
Fit the accessories (if provided).
SWITCHING ON THE APPLIANCE
Plug in the appliance.
When the appliance is warm (internal temperature
above 0°C), two dashes appear on the digital display
(1).
The red alarm LED (8) blinks and the acoustic alarm
sounds.
The "Green Intelligence" LED (6) is on.
Press the reset button (7) to deactivate the acoustic
alarm.
The acoustic alarm stops while the red alarm LED
continues to blink.
When the appliance reaches a temperature of at least -
12°C the red LED (8) stops blinking.
Food can now be placed inside the freezer.
The "Green Intelligence" LED (6) will remain lit until
the temperature set on the display is reached.
NOTE: Thanks to the efficient lid seal, the appliance lid
will not re-open easily immediately after closing. It is
necessary to wait a few minutes.
TEMPERA
TURE ADJUSTMENT
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal
temperature setting can be adjusted between -17°C and -
24°C or set to ECONOMY mode (see paragraph “ECO
function”). Proceed as follows:
Press one of the two temperature adjustment buttons
(2; 3) once.
The digital display (I) will blink, showing the previous
temperature setting.
Press the button (3) several times as required for a
warmer temperature setting. The value changes by 1°C
with each press of the button. During this process, the
value shown on the digital display blinks.
Press button (2) several times as required to lower the
temperature. The value changes by 1°C with each press
of the button. During this process, the value shown on
the digital display blinks.
About 5 seconds after the button has been pressed for
the last time, the set temperature is stored, the digital
display (1) stops blinking and shows the internal
temperature again.

View the manual for the Bauknecht GTE 2805 A3+ here, for free. This manual comes under the category freezers and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Bauknecht GTE 2805 A3+ or do you need help? Ask your question here

Need help?

Do you have a question about the Bauknecht and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBauknecht
ModelGTE 2805 A3+ | GTE 2805 A3+
Productfreezer
EAN4011577214710
LanguageEnglish
FiletypeUser manual (PDF)
Design
Appliance placementFreestanding
Product typeChest freezer
Product colorWhite
Door hingeUp
Freezer number of shelves/baskets4
Appliance placementFreestanding
Product colorWhite
Door hingeUp
LockingYes
Performance
Freezer net capacity274 L
Automatic defrost (freezer)No
No Frost systemNo
Fast freeze functionYes
Freezing capacity20 kg/24h
Freezer gross capacity280 L
Storage time during power failure60 h
Noise level42 dB
Star rating4*
Climate classSN-T
Noise level42 dB
Climate classSN-T
Ergonomics
Interior lightYes
Defrost water drainYes
LockingYes
Adjustable feetNo
Indication lightYes
Cord length2.45 m
Defrost water drainYes
Adjustable feetNo
Indication lightYes
Cord length2.45 m
Power
Connected load100 W
Current16 A
A+++
Annual energy consumption136 kWh
Connected load100 W
Current16 A
Annual energy consumption136 kWh
Weight & dimensions
Width1405 mm
Height916 mm
Depth698 mm
Weight52900 g
Width1405 mm
Height916 mm
Package depth766 mm
Package height962 mm
Depth698 mm
Package width1437 mm
Package weight54500 g
Weight52900 g
Packaging data
Package depth766 mm
Package height962 mm
Package width1437 mm
Package weight54500 g
Freezer
Freezer net capacity274 L
Automatic defrost (freezer)No
Fast freeze functionYes
Freezing capacity20 kg/24h
Freezer gross capacity280 L
Storage time during power failure60 h
Freezer number of shelves/baskets4
Star rating4*
Other features
Interior lightYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bauknecht GTE 2805 A3+ below.

What is the weight of the Bauknecht GTE 2805 A3+?

The Bauknecht GTE 2805 A3+ has a weight of 52900 g.

How often should I defrost my freezer?

It is recommended to completely defrost your freezer at least once every six months.

How should I transport a freezer?

A freezer must be transported upright at all times. It is very bad for a freezer to be transported on its side as oil from the compressor can end up in the evaporator.

What do I do about a smelly freezer?

A commonly used method is to temporarily place a cup of vinegar in the freezer.

What is the height of the Bauknecht GTE 2805 A3+?

The Bauknecht GTE 2805 A3+ has a height of 916 mm.

What is the width of the Bauknecht GTE 2805 A3+?

The Bauknecht GTE 2805 A3+ has a width of 1405 mm.

What is the depth of the Bauknecht GTE 2805 A3+?

The Bauknecht GTE 2805 A3+ has a depth of 698 mm.

Does the Bauknecht GTE 2805 A3+ have an interior light?

Yes, the Bauknecht GTE 2805 A3+ has an interior light. This feature allows users to easily locate items inside the freezer, even in low light conditions. This is a convenient feature that enhances the user experience.

Does the Bauknecht GTE 2805 A3+ have automatic defrost?

No, the Bauknecht GTE 2805 A3+ does not have automatic defrost. This means that users will need to manually defrost the freezer to prevent ice build-up. While manual defrosting may require additional effort, it can also provide better control over the cleaning process.

Does the Bauknecht GTE 2805 A3+ have a No Frost system?

No, the Bauknecht GTE 2805 A3+ does not have a No Frost system. This means that users may need to manually defrost the freezer to remove ice buildup. Compared to freezers with a No Frost system, this model may require more maintenance.

Does the Bauknecht GTE 2805 A3+ have adjustable feet?

No, the Bauknecht GTE 2805 A3+ does not have adjustable feet. The lack of adjustable feet means that users will need to ensure that the freezer is placed on a level surface, possibly requiring additional adjustments to maintain stability.

What is the storage time during power failure for the Bauknecht GTE 2805 A3+?

The storage time during power failure for the Bauknecht GTE 2805 A3+ is 60 hours. This means that even during extended power outages, the freezer can keep the stored items frozen for up to 60 hours, providing peace of mind to the user. Compared to similar products, this storage time is relatively high, offering added convenience in case of power disruptions.

How do I troubleshoot if the handle of the Bauknecht GTE 2805 A3+ freezer is loose or not functioning properly?

To troubleshoot if the handle of the Bauknecht GTE 2805 A3+ freezer is loose or not functioning properly, follow these steps: 1. Check for any visible damage or signs of wear on the handle. If there are any cracks or breaks, the handle may need to be replaced. 2. Ensure that the screws or bolts holding the handle in place are securely tightened. Use a screwdriver or wrench to tighten them if necessary. 3. If the handle is still loose, remove it by unscrewing the screws or bolts. Inspect the mounting area on the door for any damage or misalignment. 4. If the mounting area is damaged, contact After-Sales Service for further assistance. Provide them with the nature of the fault, the model (Bauknecht GTE 2805 A3+), and the service number (found on the rating plate on the rear of the appliance). 5. If the mounting area is in good condition, reattach the handle and tighten the screws or bolts securely. If the problem persists after following these steps, it is recommended to contact After-Sales Service for professional assistance.

How do I troubleshoot if the digital temperature display on the control panel of the Bauknecht GTE 2805 A3+ freezer is not working?

To troubleshoot if the digital temperature display on the control panel of the Bauknecht GTE 2805 A3+ freezer is not working, follow these steps: 1. Check for any visible damage or loose connections on the control panel. Ensure that the control panel is securely attached to the freezer. 2. Verify that the freezer is properly plugged into a functioning power outlet. Check if there is power supply to the appliance by testing other functions or indicators. 3. If the control panel is unresponsive, try resetting the freezer by unplugging it from the power source for a few minutes, then plugging it back in. This may help to reset the control panel. 4. If the display is still not working, check the user manual for any specific troubleshooting steps related to the digital temperature display. Look for information on error codes or indicators that may help identify the issue. 5. If none of the above steps resolve the issue, it is recommended to contact the manufacturer's After-Sales Service for further assistance. Provide them with the model (Bauknecht GTE 2805 A3+) and a description of the problem for accurate troubleshooting and support. By following these steps, you can troubleshoot the digital temperature display issue on the Bauknecht GTE 2805 A3+ freezer.

How do I troubleshoot if the "Extra load" button on the control panel of the Bauknecht GTE 2805 A3+ freezer is not responding when pressed?

To troubleshoot if the "Extra load" button on the control panel of the Bauknecht GTE 2805 A3+ freezer is not responding when pressed, follow these steps: 1. Check if the control panel is properly connected to the freezer and securely attached. Ensure that there are no loose connections or visible damage. 2. Verify that the freezer is receiving power by checking if other functions or indicators on the control panel are working. If there is no power, check the power supply and ensure the freezer is properly plugged in. 3. Clean the control panel and buttons using a soft, damp cloth. Sometimes, dirt or debris can interfere with the button's responsiveness. 4. If the "Extra load" button is still not responding, try resetting the freezer by unplugging it from the power source for a few minutes, then plugging it back in. This may help to reset the control panel. 5. If the issue persists, it is recommended to contact the manufacturer's After-Sales Service for further assistance. Provide them with the model (Bauknecht GTE 2805 A3+) and a description of the problem for accurate troubleshooting and support. By following these steps, you can troubleshoot the unresponsive "Extra load" button on the Bauknecht GTE 2805 A3+ freezer.

How do I troubleshoot if the alarm LED on the control panel of the Bauknecht GTE 2805 A3+ freezer is continuously lit?

To troubleshoot if the alarm LED on the control panel of the Bauknecht GTE 2805 A3+ freezer is continuously lit, follow these steps: 1. Check if the freezer is maintaining the desired temperature. If the temperature inside the freezer is above the set value, it can trigger the alarm LED. Ensure that the freezer is properly closed and that the temperature settings are appropriate. 2. Verify if there has been a power failure or interruption. A prolonged power failure can cause the internal temperature to rise, triggering the alarm LED. If this is the case, press the alarm reset button on the control panel to deactivate the alarm. 3. Inspect the temperature sensor. If there is a fault with the temperature sensor, it can cause the alarm LED to remain lit. In such cases, it is recommended to contact the After-Sales Service for further assistance. 4. Clean the control panel and buttons using a soft, damp cloth. Sometimes, dirt or debris can interfere with the proper functioning of the control panel. 5. If the alarm LED continues to stay lit after performing these troubleshooting steps, it is advisable to contact the manufacturer's After-Sales Service for professional assistance. Provide them with the model (Bauknecht GTE 2805 A3+) and a description of the issue for accurate troubleshooting and support. By following these steps, you can troubleshoot the issue of the continuously lit alarm LED on the Bauknecht GTE 2805 A3+ freezer.

How do I troubleshoot if the defrost water drain plug of the Bauknecht GTE 2805 A3+ freezer is clogged or not draining properly?

To troubleshoot if the defrost water drain plug of the Bauknecht GTE 2805 A3+ freezer is clogged or not draining properly, follow these steps: 1. Disconnect the appliance from the power supply and remove any food from the freezer. 2. Locate the internal defrost water drain plug, which may vary depending on the model. Remove the plug to access the drain. 3. Check if the drain is clogged with ice or debris. If there is ice buildup, use a spatula or similar tool to gently remove the ice. 4. Clean the drain with warm water and a mild detergent to remove any debris or blockages. Use a small brush or pipe cleaner to reach into the drain if necessary. 5. Ensure that the external defrost water drain plug is properly positioned and not obstructed. 6. If the drain plug is damaged or the issue persists, it is recommended to contact the manufacturer's After-Sales Service for further assistance. Provide them with the model (Bauknecht GTE 2805 A3+) and a description of the problem for accurate troubleshooting and support. By following these steps, you can troubleshoot the clogged or improperly draining defrost water drain plug of the Bauknecht GTE 2805 A3+ freezer.

Is the manual of the Bauknecht GTE 2805 A3+ available in English?

Yes, the manual of the Bauknecht GTE 2805 A3+ is available in English .

Is your question not listed? Ask your question here

No results