Balay 3VF5012NP manual

Balay 3VF5012NP
7.7 · 1
PDF manual
 · 2 pages
English
manualBalay 3VF5012NP
1
ø 2
~12
521 521566 566
566
ø 2
~12
566
ø 2
~12
502
ø 2
~12
502
9
9
a
a
Torx T 20
24
24
?
9
9
4
4
25
25
25
4
Torx T 20
max 1,1 m
min. 10 mm
Scheibe entfernenremove discenlever le disqueEliminar Disco
26,4 mm
(G 3/4“)
20,9 mm
(G 1/2“)
0,05 - 1 MPa
(0,5 - 10 bar)
max. 60°C
10 l / min
Fi =
max. 10 Nm
26
27
28
min. ø 18 mm
Dichtheit nach einem Spülgang prüfen.
Check for leaks after one wash cycle.
Vérifiez l´étanchéité aprés un lavage.
Verificar la estanquiedad tras un ciclo de lavado.
29
20
21
GV 640 B Voll-I - 81,5 cm - k.SW 9001 170 054 (0205)

*9001170054*

11
SW 10verspannenbracecalar verticalementEnrasarSW 13
10
0 - 60 mm
9
nicht einklemmendo not pinchne pas coincerNo doblar
1
3
1
ø 4x15
ø 4x15
ø 4x15
max.
1.1m
min.
280 mmø 38 mm
10
3
8
9
5 6
~2h-3h
10
Mat.-Nr. 350564120225225 m

View the manual for the Balay 3VF5012NP here, for free. This manual comes under the category dishwashers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Balay 3VF5012NP or do you need help? Ask your question here

Need help?

Do you have a question about the Balay and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
A
Audrey February 21, 2024

Hi - Where can I get the full instruction manual for a Balay dishwasher - model number 3VF5012NP in English?

The Balay 3VF5012NP dishwasher is a household appliance that uses advanced technology to ensure efficient and effective cleaning of dishes. With a capacity of 12 place settings, it offers ample space for washing a family's daily dishes. The dishwasher has an energy efficiency rating of A++. This means that it uses minimal energy, thus saving on electricity bills. The 3VF5012NP offers six washing programs, including Eco, Pre-wash, and Quick Wash, that cater to different washing needs. The dishwasher has a noise level of 48dB, which is relatively low, and thus, it operates quietly, making it convenient for use any time of day. The dishwasher features a timer delay function that allows users to set the machine to start washing at a later time. This feature is especially useful for families desiring to reduce peak hour energy tariffs. The dishwasher is equipped with a Load Sensor that measures the load and adjusts the amount of water and energy needed for efficient cleaning, making it an eco-friendly appliance. The 3VF5012NP is equipped with a self-cleaning filter that keeps the dishwasher hygienic and reduces blockages. With its excellent drying performance, the dishwasher leaves dishes free of spots and streaks, ensuring that they come out looking spotless and shiny.

General
BrandBalay
Model3VF5012NP | 3VF5012NP
Productdishwasher
EAN4242006310196
LanguageEnglish
FiletypeUser manual (PDF), Energy label (PDF)
Weight & dimensions
Weight32600 g
Depth550 mm
Depth with door open1150 mm
Height815 mm
Width598 mm
Power
Water consumption per cycle10.5 L
Current10 A
Connected load2400 W
Energy efficiency scaleA to G
92 kWh
Energy efficiency classE
Energy consumption per cycle0.923 kWh
Performance
Temperature (max)70 °C
Cycle time (quick washing program)15 min
AquaStop functionYes
Number of temperature settings4
Dishwashing programs60min 65°C, Auto, Eco, Favorite, Intensive
Cycle time270 min
Half-loadYes
C
Automatic programsYes
Number of place settings12 place settings
Overflow protection-
Noise level48 dB
Number of washing programs5
Design
Appliance placementFully built-in
Inlet hose length1.65 m
Cord length1.75 m
Control typeButtons
Built-in displayYes
Yes
Product sizeFull size (60 cm)
Door colorNot applicable
Custom panel-readyYes
Control panel colorBlack
Outlet hose length1.9 m
Ergonomics
Floor indicator lightYes
Child lockYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Balay 3VF5012NP below.

What do I do about a smelly dishwasher?

In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner

Do you have to pre-rinse the dishes?

It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.

How much dishwashing detergent should I use?

The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.

How do I add softening salt to my dishwasher?

Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.

What is the weight of the Balay 3VF5012NP?

The Balay 3VF5012NP has a weight of 32600 g.

What is the height of the Balay 3VF5012NP?

The Balay 3VF5012NP has a height of 815 mm.

What is the width of the Balay 3VF5012NP?

The Balay 3VF5012NP has a width of 598 mm.

What is the depth of the Balay 3VF5012NP?

The Balay 3VF5012NP has a depth of 550 mm.

What energy label does the Balay 3VF5012NP have?

The Balay 3VF5012NP has energy label E.

Does the Balay 3VF5012NP have a built-in display?

Yes, the Balay 3VF5012NP has a built-in display. This feature allows users to easily monitor the settings and progress of their dishwasher.

How many temperature settings does the Balay 3VF5012NP have?

The Balay 3VF5012NP has 4 temperature settings. This provides users with flexibility in choosing the desired temperature for their dishwasher cycles.

Can the Balay 3VF5012NP handle half-load cycles?

Yes, the Balay 3VF5012NP has a half-load option. This means that users can choose to only wash a smaller load of dishes, saving water and energy.

How long is the cycle time for the quick washing program on the Balay 3VF5012NP?

The cycle time for the quick washing program on the Balay 3VF5012NP is 15 minutes. This is a relatively short time compared to other dishwashers, allowing for quick and efficient cleaning.

Does the Balay 3VF5012NP have a child lock?

Yes, the Balay 3VF5012NP has a child lock feature. This ensures that children cannot accidentally open the dishwasher or modify the settings, providing added safety and peace of mind for the user.

How do I properly tighten the Torx T20 screw in the Balay 3VF5012NP dishwasher?

To properly tighten the Torx T20 screw in the Balay 3VF5012NP dishwasher, follow these steps: 1. Locate the Torx T20 screw on the dishwasher. It is usually found on the back or side panel. 2. Use a Torx T20 screwdriver to tighten the screw. Insert the screwdriver into the screw head and turn it clockwise to tighten. 3. Apply gentle pressure while turning the screwdriver to ensure a secure and tight fit. Avoid applying excessive force, as it may damage the screw or the dishwasher. 4. Continue tightening the screw until it is snug and does not rotate freely. Be careful not to overtighten, as it may strip the screw or cause damage to the dishwasher. 5. Once the screw is properly tightened, check the surrounding area to ensure there are no loose parts or components. By following these steps, you can properly tighten the Torx T20 screw in the Balay 3VF5012NP dishwasher.

What are the minimum and maximum pressure and temperature limits for the Balay 3VF5012NP dishwasher?

The Balay 3VF5012NP dishwasher has the following pressure and temperature limits: - Pressure: The minimum pressure limit is 0.05 MPa (0.5 bar), and the maximum pressure limit is 1 MPa (10 bar). - Temperature: The maximum temperature limit is 60°C. Please note that these limits ensure the proper functioning and safety of the dishwasher. It is important to operate the dishwasher within these specified limits to avoid any damage or malfunction. If you encounter any issues related to pressure or temperature, it is recommended to check the water supply and ensure that it meets the required pressure and temperature specifications. Additionally, make sure that the dishwasher is not exposed to extreme temperatures or pressure fluctuations that may exceed the specified limits. By following these guidelines, you can ensure the optimal performance and longevity of your Balay 3VF5012NP dishwasher.

How can I check for leaks after one wash cycle in the Balay 3VF5012NP dishwasher?

To check for leaks after one wash cycle in the Balay 3VF5012NP dishwasher, follow these steps: 1. After completing a wash cycle, open the dishwasher door and inspect the interior for any signs of water leakage. 2. Check the bottom of the dishwasher and the area around the door seals for any visible water or moisture. 3. Carefully examine the dishwasher's hoses and connections for any signs of leaks or drips. Pay close attention to the water inlet and drain hoses. 4. If you notice any leaks or moisture, ensure that the hoses are properly connected and tightened. Tighten any loose connections if necessary. 5. Inspect the door seals for any damage or wear. If the seals are worn or damaged, they may need to be replaced to prevent leaks. 6. Run another wash cycle and closely monitor the dishwasher for any new leaks. If you still notice leaks after the second wash cycle, it is recommended to contact a qualified technician for further assistance. By following these steps, you can check for leaks after one wash cycle in the Balay 3VF5012NP dishwasher and take appropriate action to address any issues.

What should I do if I find a leak in the Balay 3VF5012NP dishwasher after one wash cycle?

If you find a leak in the Balay 3VF5012NP dishwasher after one wash cycle, follow these steps: 1. After noticing the leak, immediately stop the dishwasher and turn off the water supply to prevent further damage. 2. Carefully inspect the area where the leak is occurring. Check the bottom of the dishwasher, the door seals, and the hoses for any visible signs of water leakage. 3. Ensure that all connections, such as the water inlet and drain hoses, are properly tightened and secure. If any connections are loose, tighten them using the appropriate tools. 4. Examine the door seals for any damage or wear. If the seals are worn or damaged, they may need to be replaced to prevent future leaks. 5. If the leak persists or you are unable to identify the source of the leak, it is recommended to contact a qualified technician or the Balay customer service for further assistance. By following these steps, you can address a leak in the Balay 3VF5012NP dishwasher after one wash cycle and take appropriate action to resolve the issue.

How do I ensure the tightness of the Balay 3VF5012NP dishwasher?

To ensure the tightness of the Balay 3VF5012NP dishwasher, follow these steps: 1. Start by checking the door seal of the dishwasher. Inspect it for any signs of damage or wear. If you notice any issues, such as cracks or tears, the seal may need to be replaced. 2. Close the dishwasher door firmly and ensure that it latches securely. If the door does not close properly or feels loose, it may indicate a problem with the latch mechanism. In such cases, contact a qualified technician for assistance. 3. Check the water inlet and drain hoses for any leaks or loose connections. Make sure that the hoses are securely attached to their respective connections. If you find any leaks or loose connections, tighten them using the appropriate tools. 4. Inspect the dishwasher's filter and spray arms. Ensure that they are properly installed and securely in place. If they are loose or misaligned, adjust them accordingly. 5. Regularly clean and maintain the dishwasher according to the manufacturer's instructions. This includes removing any debris or food particles from the filter and spray arms, as well as descaling the dishwasher if necessary. By following these steps, you can ensure the tightness of the Balay 3VF5012NP dishwasher and maintain its optimal performance.

Is the manual of the Balay 3VF5012NP available in English?

Yes, the manual of the Balay 3VF5012NP is available in English .

Is your question not listed? Ask your question here

No results