Balay 3TS992BT manual

Balay 3TS992BT
9.1 · 1
PDF manual
 · 1 page
Universal
manualBalay 3TS992BT
A
B
C
D
E
F
G
2019/2014
100
Balay
3TS992BT
C
72dB
ABCDEFG

66 kWh

44 L
9.0 kg
3:37

View the manual for the Balay 3TS992BT here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: Universal. Do you have a question about the Balay 3TS992BT or do you need help? Ask your question here

Need help?

Do you have a question about the Balay and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBalay
Model3TS992BT | 3TS992BT
Productwashing machine
EAN4242006294083
LanguageUniversal
FiletypeEnergy label (PDF)
Design
Appliance placementFreestanding
Loading typeFront-load
Product colorWhite
Custom panel-ready-
Built-in displayYes
Display typeLED
CertificationCE, VDE
Cord length1.6 m
Door hingeLeft
Control typeRotary, Touch
Door colorBlack, Transparent
Viewing windowYes
Drum volume63 L
Performance
Maximum spin speed1200 RPM
Drum capacity9 kg
Automatic load recognitionYes
Adjustable spin speedYes
Minimum spin speed400 RPM
Delayed start timerYes
Delay start (max)24 h
Black, Blouse/shirt, Cold, Cotton, Wool, Microfiber, Mix, Quick, Spin/drain, Delicate/silk
Easy iron functionYes
Adjustable temperatureYes
Add garment (pause) functionYes
Overflow protectionYes
Noise level (spin)72 dB
Noise level (wash)48 dB
Menu languagesESP, POR
Wi-Fi controlled-
Near Field Communication (NFC)-
Foam control systemYes
Load balancing systemYes
AquaStop function-
Spin-drying classB
Number of washing programs-
Residual moisture53 %
Cycle time (max)217 min
A
Power
Energy efficiency scaleA to G
Power consumption (off)0.1 W
Power consumption (standby)0.5 W
AC input frequency50 Hz
Energy consumption washing per cycle0.9 kWh
Connected load2300 W
AC input voltage220 - 240 V
Current10 A
Energy efficiency classC
66 kWh
Water consumption per cycle44 L
Ergonomics
Remaining time indicationYes
Self-cleaningYes
Self-cleaning detergent drawerYes
Child lockYes
Drum interior lightNo
On/off buttonYes
Removable topYes
Adjustable feetYes
Feet adjustment12 mm
BuzzerYes
Weight & dimensions
Width598 mm
Depth590 mm
Height857 mm
Depth with door open1063 mm
Weight68987 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Balay 3TS992BT below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Balay 3TS992BT?

The Balay 3TS992BT has a weight of 68987 g.

What certifications does the Balay 3TS992BT have?

The Balay 3TS992BT has the following certifications: CE, VDE.

What is the height of the Balay 3TS992BT?

The Balay 3TS992BT has a height of 857 mm.

What is the width of the Balay 3TS992BT?

The Balay 3TS992BT has a width of 598 mm.

What is the depth of the Balay 3TS992BT?

The Balay 3TS992BT has a depth of 590 mm.

What energy label does the Balay 3TS992BT have?

The Balay 3TS992BT has energy label C.

Does the Balay 3TS992BT have a built-in display?

Yes, the Balay 3TS992BT does have a built-in display. This makes it easier for the user to see and control the washing machine settings.

What is the maximum spin speed of the Balay 3TS992BT?

The maximum spin speed of the Balay 3TS992BT is 1200 RPM. This high spin speed helps in efficient water extraction from clothes, which results in faster drying time.

Can the Balay 3TS992BT automatically recognize the load?

Yes, the Balay 3TS992BT has automatic load recognition. This feature allows the washing machine to adjust the water and energy consumption according to the load size, providing optimal washing performance and efficiency.

Does the Balay 3TS992BT have a self-cleaning function?

Yes, the Balay 3TS992BT has a self-cleaning function. This helps in maintaining the cleanliness and hygiene of the washing machine, ensuring better washing results and prolonging the lifespan of the appliance.

Can the Balay 3TS992BT be started with a delayed timer?

Yes, the Balay 3TS992BT has a delayed start timer with a maximum delay of 24 hours. This feature enables the user to conveniently schedule the start of the washing cycle, allowing for better time management and flexibility.

How can I troubleshoot if the Balay 3TS992BT washing machine is not starting or responding to commands?

To troubleshoot if the Balay 3TS992BT washing machine is not starting or responding to commands, follow these steps: 1. Check the power connection: Ensure that the power cable is properly connected to the electrical outlet. If not, plug it in securely. 2. Check the fuse: Verify if the fuse in the fuse box is functioning correctly. If the fuse is defective, replace it with a new one. 3. Check the power supply: Make sure there is no power outage or interruption in the electrical supply. Check if other appliances or lights in the room are working. 4. Press the Start/Pause button: Ensure that you have pressed the Start/Pause button to initiate the washing program. If not, press the button to start the machine. 5. Check the door: Ensure that the door is fully closed and latched. If the door is not closed properly, the machine will not start. Close the door securely. If the issue persists after following these troubleshooting steps, it is recommended to contact the Balay customer service for further assistance.

What should I do if the Balay 3TS992BT washing machine is not properly cleaning the clothes?

To ensure proper cleaning of clothes with the Balay 3TS992BT washing machine, follow these steps: 1. Sort the laundry: Separate the clothes based on their fabric type (e.g., cotton, synthetics) and color (e.g., whites, colors). This helps prevent color bleeding and ensures optimal cleaning. 2. Pre-treat stains: If there are any visible stains on the clothes, pre-treat them before washing. Use a stain remover or gently rub the stained area with a small amount of detergent. 3. Load the machine correctly: Place the clothes loosely in the drum, ensuring not to overload it. Overloading can affect the washing performance and may lead to inadequate cleaning. 4. Select the appropriate program: Choose the washing program that matches the fabric type and level of dirtiness. Refer to the program guide in the manual for assistance in selecting the right program. 5. Use the recommended amount of detergent: Follow the manufacturer's instructions for the correct dosage of detergent. Using too much detergent can leave residue on the clothes, while using too little may result in insufficient cleaning. 6. Check water temperature: Ensure that the water temperature selected is suitable for the fabric being washed. Hotter temperatures are suitable for whites and heavily soiled items, while cooler temperatures are suitable for delicate fabrics. 7. Start the wash cycle: Close the door securely and press the Start/Pause button to begin the wash cycle. If the issue persists or if you have specific concerns about the cleaning performance, it is recommended to contact Balay customer service for further assistance.

How can I troubleshoot if the Balay 3TS992BT washing machine is making unusual noises during operation?

To troubleshoot if the Balay 3TS992BT washing machine is making unusual noises during operation, follow these steps: 1. Check for sibilant sounds: If you hear hissing or whistling noises, it is considered normal operation as the water is being rinsed under pressure in the detergent compartment. 2. Check for loud noises during spin cycle: If the machine is not properly leveled, it can cause strong noises during the spin cycle. Ensure that the machine is leveled correctly by adjusting the feet. 3. Check for loose feet: If the feet of the machine are not properly fixed, it can cause noise during operation. Make sure to fix the feet securely. 4. Check for transport locks: If there are loud noises and jerking movements during the pump's operation, it may indicate the presence of a foreign object in the drain pump. Clean the drain pump to resolve the issue. 5. Check for rhythmic suction noises: If you hear rhythmic suction noises, it is considered normal operation as the drain pump is activated and emptying the wash water. If the issue persists or if you have any other concerns, it is recommended to contact Balay customer service for further assistance.

What should I do if the Balay 3TS992BT washing machine is displaying error codes on the control panel?

If the Balay 3TS992BT washing machine is displaying error codes on the control panel, follow these steps to troubleshoot the issue: 1. Identify the error code: Take note of the specific error code displayed on the control panel. Each error code corresponds to a specific issue with the machine. 2. Refer to the manual: Consult the manual for a list of error codes and their corresponding meanings. The manual provides detailed information on how to troubleshoot each error code. 3. Perform basic checks: Check if the machine is properly connected to the power supply and if the water supply is sufficient. Ensure that the door is closed securely. 4. Reset the machine: Turn off the machine and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can sometimes resolve minor issues. 5. Contact customer service: If the error persists or if you are unsure about the troubleshooting steps, it is recommended to contact Balay customer service for further assistance. Provide them with the specific error code for better assistance. Remember to always refer to the manual for specific error code meanings and troubleshooting steps.

How can I troubleshoot if the Balay 3TS992BT washing machine is leaking water during a wash cycle?

To troubleshoot if the Balay 3TS992BT washing machine is leaking water during a wash cycle, follow these steps: 1. Check the water inlet hoses: Ensure that the water inlet hoses are securely connected to both the machine and the water supply. Tighten any loose connections if found. 2. Inspect the drain hose: Check the drain hose for any kinks, twists, or blockages. Straighten the hose and remove any obstructions if necessary. 3. Examine the door seal: Inspect the door seal for any signs of damage, such as cracks or tears. Clean the seal with a damp cloth to remove any debris or residue that may cause leakage. 4. Verify detergent usage: Ensure that the correct amount of detergent is being used. Using excessive detergent can cause excessive sudsing and overflow, leading to water leakage. Follow the manufacturer's guidelines for detergent dosage. 5. Level the machine: Check if the machine is level by using a spirit level. Adjust the feet of the machine to ensure it is stable and balanced. 6. Contact customer service: If the issue persists or if you are unable to identify the source of the leakage, it is recommended to contact Balay customer service for further assistance. Remember to always follow safety precautions and disconnect the machine from the power supply before performing any inspections or repairs.

How do I unlock the child lock feature on the Balay 3TS992BT washing machine?

To unlock the child lock feature on the Balay 3TS992BT washing machine, follow these steps: 1. Open the washing machine door and remove any clothes inside. 2. Make sure the washing machine is turned on. 3. Press and hold both buttons with the child lock symbol for approximately 3 seconds. 4. The child lock symbol on the control panel will disappear, indicating that the child lock feature has been deactivated. 5. You can now use the washing machine as usual. Please note that the child lock feature is designed to prevent accidental operation of the washing machine by children. By following these steps, you can easily unlock the child lock and resume normal operation of the Balay 3TS992BT washing machine.

Why is the washing machine not starting when I press the power button?

If the Balay 3TS992BT washing machine is not starting when you press the power button, there could be a few possible reasons. Here are some troubleshooting steps you can try: 1. Check the power supply: Ensure that the washing machine is properly plugged into a functioning power outlet. You can also try plugging in another device to confirm if the outlet is working. 2. Check the door: Make sure that the door of the washing machine is fully closed and latched. If the door is not closed properly, the machine will not start. 3. Check the water supply: Ensure that the water supply is connected and turned on. If there is no water supply, the washing machine may not start. 4. Check the control panel: Make sure that the control panel is not locked or in a paused state. Some washing machines have a lock or pause feature that can prevent the machine from starting. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact the Balay customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the machine if needed. Please note that these troubleshooting steps are general guidelines and may vary depending on the specific model of the Balay 3TS992BT washing machine.

How do I properly connect the water inlet hose to the washing machine?

To properly connect the water inlet hose to the Balay 3TS992BT washing machine, follow these steps: 1. Acquire the water inlet hose that is suitable for the machine. 2. Attach one end of the water inlet hose to the water inlet valve located at the back of the washing machine. Make sure it is securely connected. 3. Connect the other end of the water inlet hose to the water supply. This can be a faucet or a dedicated water supply pipe. 4. Ensure that the connection is tight and there are no leaks. 5. Turn on the water supply and check for any leaks or drips. 6. Once the water inlet hose is properly connected and there are no leaks, you can proceed to use the washing machine for your laundry needs. Please note that the specific instructions for connecting the water inlet hose may vary depending on the model of the Balay 3TS992BT washing machine. It is always recommended to refer to the user manual for detailed instructions and illustrations specific to your machine.

Why is the washing machine not spinning or draining the water?

There could be several reasons why the Balay 3TS992BT washing machine is not spinning or draining the water. Here are some possible causes and troubleshooting steps: 1. Check for an unbalanced load: If the load inside the washing machine is not distributed evenly, it can cause the machine to not spin or drain properly. Open the door and redistribute the clothes evenly in the drum. 2. Ensure the drain hose is not blocked: Check the drain hose for any obstructions or kinks that may be preventing the water from draining. Clear any blockages and ensure the hose is properly connected. 3. Verify the water supply: Make sure that the water supply to the washing machine is adequate. Ensure that the water taps are fully open and that there is sufficient water pressure. 4. Check the filter: The washing machine may have a filter that needs to be cleaned periodically. Locate the filter (usually at the bottom front of the machine) and clean it according to the instructions in the manual. 5. Reset the machine: Sometimes, a simple reset can resolve issues. Turn off the washing machine, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on. If the issue persists after trying these troubleshooting steps, it is recommended to contact Balay customer support for further assistance. They will be able to provide specific guidance based on the model and help resolve the issue.

How do I adjust the temperature and spin speed settings for different programs on the Balay 3TS992BT washing machine?

To adjust the temperature and spin speed settings for different programs on the Balay 3TS992BT washing machine, follow these steps: 1. Refer to the program descriptions in the manual to identify the desired program for your laundry. Each program has specific temperature and spin speed settings. 2. On the control panel of the washing machine, locate the program selection dial or buttons. Turn the dial or press the buttons to select the desired program. 3. Once the program is selected, you can adjust the temperature setting. Refer to the program description in the manual to determine the maximum temperature available for that program. Use the temperature control dial or buttons to set the desired temperature. 4. Next, you can adjust the spin speed setting. Again, refer to the program description in the manual to determine the maximum spin speed available for that program. Use the spin speed control dial or buttons to set the desired spin speed. 5. After adjusting the temperature and spin speed settings, you can proceed to load the laundry into the machine and start the selected program. Please note that the specific steps and options for adjusting temperature and spin speed settings may vary depending on the program and model of the Balay 3TS992BT washing machine. It is always recommended to refer to the user manual for detailed instructions and illustrations specific to your machine.

Is the manual of the Balay 3TS992BT available in English?

Unfortunately, we do not have the manual for the Balay 3TS992BT available in English. This manual is available in Universal.

Is your question not listed? Ask your question here

No results