Balay 3TS883X manual

Balay 3TS883X
7.9 · 2
PDF manual
 · 8 pages
English
manualBalay 3TS883X
7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max.
Type of laundry
Additional functions; Information
algod. (Cottons)
: - 90 °C
8 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be
washed at 90°C
+ rápido
2*, + eco 1, menos w, extra
+ prelav. (Prewash)
sintéticos (Easy-Care)
: - 60 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics
+ rápido
2, + eco 1, menos w, extra
+ prelav. (Prewash)
rápido mix (Quick Mix) : - 40 °C cotton or synthetic fabrics
+ rápido
2, + eco 1, menos w, extra ;
different types of laundry can be washed together
r. oscura/r. escura
(Dark Laundry)
: - 40 °C dark cotton and dark synthetic fabrics
+ rápido
2, + eco 1, menos w, extra ;
reduced rinse and final spin cycle
camisas (Shirts/Business)
: - 60 °C
2 kg
non-iron shirts made of cotton, linen, synthetic fibres or
blended fabrics
+ rápido
2, + eco 1, menos w, extra ;
menos w: spin only, hang up dripping wet
delicados
(Delicate/Silk)
: - 40 °C
for delicate fabrics, e.g., silk, satin, synthetic fibres or
blended fabrics (e.g. curtains)
+ rápido
2, + eco 1, menos w, extra :
no spin between rinse cycles
ÿ lana/lã (Wool) : - 40 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laundry;
longer programme breaks (fabrics rest in the detergent solution)
sup. rápido 15 min
(Super Quick)
: - 40 °C
synthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of approx. 15 minutes,
suitable for lightly soiled laundry
imperm. (Outdoor) : - 40 °C
all-weather, sports and outdoor fabrics including fabrics
with weatherproof membrane
+ rápido
2, + eco 1, extra ;
reduced final spin in intervals
lencería/lingerie (Lingery) : - 40 °C 1 kg lingery
+ rápido
2, + eco 1, menos w, extra
Additional programmes 2ü(Rinse)/c(Spin), 4ü(Empty), cdelicado (Gentle Spin)
* reduced load with additional function + rápido
2.
For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments I and II.
9202 / 9000674376

9000674376

3TS883 /...
Balay Electrogeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8

Safety instructions

Carefully read the instruction manual and the information enclosed, and act accordingly.
Keep the machine's documentation for future reference.
Risk of electric shock! Never pull the cable to disconnect the mains plug!
Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! Keep detergents and care products out of the reach of children.
Risk of explosion! Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! The washing machine door may become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.

Consumption values depending on model

Programme Load Electricity*** Water***
Programme
duration
***
algod. :](cold) 8 kg 0.27 kWh 68 l 145 min
algod. 30 °C* 8 kg 0.39 kWh 68 l 145 min
algod. 40 °C* 8 kg 1.02 kWh 68 l 155 min
algod. 60 °C* 8 kg 1.15 kWh 68 l 165 min
algod. 90 °C 8 kg 2.30 kWh 80 l 155 min
sintéticos 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
rápido mix 40 °C 3.5 kg 0.54 kWh 47 l 60 min
delicados 30 °C 2 kg 0.19 kWh 34 l 41 min
lana/lã 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme
Additional
function
Load
Annual energy
consumption
Annual water
consumption
algod. 40/60 °C
+ eco
1**
8/4 kg 197 kWh 8580 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
8
9

Care and cleaning

Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
approx. 2 litres of water
detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to sintéticos (Easy-Care) 60 °C and press inicio (Start/Reload). At the end of the programme,
turn the programme selector to o (stop).
Machine housing, control panel
Remove detergent and cleaning agent residue.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release (e.g. in the event of a power cut)
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to o (stop) and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
, flashes Close the washing machine door properly; laundry may be caught.
§: ³Å,
§
: É
Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§: ³µ Detergent solution pump blocked; Clean the detergent solution pump apage 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
Heavy foam build-up apage 11, status indicator 1 flashes.
§: ´ Water in the base tub, appliance leaking. Call customer services!
©: ³¯ Open the (hot water) tap fully.
Inlet hose kinked/trapped.
Water pressure too low. Clean the filter apage 10.
Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
# Childproof lock activated: to deactivate a page 5.
Risk of electric shock! Disconnect the mains plug.
Risk of explosion! Do not use solvents.
9
10

Maintenance

Detergent solution pump
Turn the programme selector to o (stop) and disconnect
the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the 4
ü(Empty) programme.
Drainage hose at the siphon
Turn the programme selector to o (stop) and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except 2
ü(Rinse)/c(Spin) // 4(Empty)).
3. Choose inicio (Start/Reload). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to o (stop). Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
Risk of burning!
Allow the detergent solution to cool.
Turn off the tap.
11

What to do if...

ʑ
Water is leaking out Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
inicio (Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter apage 10.
Supply hose kinked or trapped?
ʑ
The appliance door will not
open.
Safety function active. Programme stopped? apage 4.
(without final spin) selected? apage 3, 4.
Can be opened by emergency release only? apage 9.
Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑ
The selected programme does
not start.
inicio (Start/Reload)or b (h) (Ready in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate apage 5.
ʑ
Detergent solution is not
drained.
(without final spin) selected? apage 3, 4.
Clean the detergent solution pump apage 10.
Clean the waste pipe and/or drainage hose.
ʑ
No water can be seen in the
drum.
Not a fault. Water remains inside below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp.
Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
menos S(Reduced Ironing) selected? apage 5.
Selected speed too low? apage 5.
ʑ
Programme duration changes
suddenly during operation.
Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑ
Spin cycle performed several
times.
Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑ
Residual water in the
compartment for care products.
Not a fault: the action of the care product is not affected.
Clean the compartment if necessary apage 9.
ʑ
Odour formation in the washing
machine.
Run programme algod. (Cottons)90 °C without laundry. Use standard detergent.
ʑ
Status display 1 flashing.
Appliance has detected a
detergent overload.
Too much detergent used?
If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and "wandering"
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑ
Display panel/indicator lamps
remain turned off while the
machine is working.
Energy-saving mode apage 5.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence longer
than usual.
Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
Not a fault: foam detection system active; adds an additional rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble residues.
Select 2
ü(Rinse)/c(Spin) or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
Turn the programme selector to o (stop) and remove the mains plug from the socket.
Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
en
Washing
Machine
Observe the safety instructions on
page 8!
Read these instructions and the separate
installation instructions before operating
the washing machine.

View the manual for the Balay 3TS883X here, for free. This manual comes under the category washing machines and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Balay 3TS883X or do you need help? Ask your question here

Need help?

Do you have a question about the Balay and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
J
José Ramón ValdivielsoDecember 8, 2020

Where can I find the agitator for this washing machine 3TS883X, only the agitator, I do not want the drum that they offer me as a natural replacement for this malfunction.

This message has been automatically translated
N
NarcisoAugust 4, 2021

Good evening, there is a noise when spinning, I think it is the bearings. Can only the bearings be replaced or does the entire drum need to be replaced? Thank you very much, regards.

Good evening, there is a noise when spinning, I think it is the bearings. Can only the bearings be replaced or does the entir...
zoom-in
View photo
This message has been automatically translated
C
ClaieeJuly 23, 2023

The child lock is on, and I have followed the instructions to turn it on and it still won’t, I have pressed the “start” button for 15 seconds immediately after turning on etc

The Balay 3TS883X washing machine is a freestanding appliance designed for efficient and convenient laundry care. With an energy efficiency class of A++, it offers energy savings while providing reliable performance. The washing machine has a rated capacity of 8 kg, allowing for ample space to wash large loads of laundry. Featuring a maximum spin speed of 1000 RPM, the Balay 3TS883X ensures thorough cleaning and efficient drying. The appliance is equipped with a built-in LED display, allowing users to easily monitor and control the washing process. This display provides clear and visible information, making it easy to select the desired options and settings. The Balay 3TS883X has an annual water consumption of 9300 liters and an annual energy consumption of 197 kWh, indicating its efficiency in water and energy usage. With a power consumption of 2300 W and a current of 10 A, the washing machine operates efficiently while delivering powerful performance. Constructed with quality materials, the Balay 3TS883X is built to withstand frequent use and ensure durability over time. Its freestanding design allows for flexible placement within the laundry area, accommodating different room layouts and spaces. In summary, the Balay 3TS883X washing machine combines energy efficiency, a large capacity, and a range of convenient features. It provides reliable performance, efficient cleaning, and durability, making it a practical choice for households seeking an effective laundry solution.

General
BrandBalay
Model3TS883X | 3TS883X
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF)
Power
A++
Energy consumption washing per cycle- kWh
Power consumption (typical)2300 W
Current10 A
Water consumption per cycle- L
Other features
Power requirements220 - 240V
Annual water consumption washing9300 L
Annual energy consumption washing197 kWh
Design
Built-in displayYes
Display typeLED
Loading typeFront-load
Appliance placementFreestanding
Cord length1.6 m
Door hingeLeft
Door opening angle90 °
Drum volume58 L
Water fillCold
Drum materialStainless steel
Product colorSilver
Door colorSilver
Inverter technologyNo
Performance
Number of washing programs-
Drum capacity8 kg
Maximum spin speed1000 RPM
Spin-drying class-
TimerYes
Noise level (wash)54 dB
Minimum spin speed400 RPM
Delayed start timerYes
Delay start (max)24 h
Noise level (spin)76 dB
Half-load-
Hygiene/anti-allergy, Black
Weight & dimensions
Weight65000 g
Width600 mm
Depth550 mm
Height848 mm
Ergonomics
Self-cleaningYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Balay 3TS883X below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Balay 3TS883X?

The Balay 3TS883X has a weight of 65000 g.

What is the height of the Balay 3TS883X?

The Balay 3TS883X has a height of 848 mm.

What is the width of the Balay 3TS883X?

The Balay 3TS883X has a width of 600 mm.

What is the depth of the Balay 3TS883X?

The Balay 3TS883X has a depth of 550 mm.

How do I select the appropriate wash cycle for my clothes?

Understanding the fabric types and their corresponding wash cycles will help you determine the appropriate program. Sort your laundry by fabric, and refer to the control panel to select the suitable cycle, such as 'Cotton', 'Delicate', or 'Synthetics', depending on your garments' requirements.

How can I ensure the washing machine operates at the right temperature?

To set the desired temperature, use the temperature control settings on the control panel. You can choose between options like '30°C', '40°C', or 'Cold Wash' to meet the needs of your laundry. It is important to consider the fabric care labels and the level of soiling to select the most appropriate temperature.

What is the recommended detergent dosage for each wash?

The correct detergent dosage depends on the load size, water hardness, and the level of soiling. It is best to follow the instructions provided by the detergent manufacturer and adjust the dosage accordingly. Many washing machines have markings indicating the recommended dosage levels for different load sizes.

How do I properly load the washing machine to avoid unbalanced loads?

Distribute your laundry evenly inside the drum to prevent unbalanced loads. Make sure not to overload the machine as it may cause issues during the spin cycle. Place larger items, such as towels or bedding, symmetrically around the drum and add smaller garments to fill any empty spaces.

Why is my washing machine making unusual noises during operation?

Unusual noises during operation can be attributed to various factors. Check if any foreign objects, such as coins or buttons, are trapped in the drum or pump filter. Additionally, ensure that the machine is level and stable on the floor, as an unstable position can result in vibrations and noise. If the problem persists, it may require further investigation by a technician.

Does the Balay 3TS883X have a built-in display?

Yes, the Balay 3TS883X has a built-in display which is LED type. This allows the user to easily view and adjust settings on the washing machine.

What is the energy efficiency class of the Balay 3TS883X?

The Balay 3TS883X has an energy efficiency class of A++. This means that it is very energy efficient and will help save energy and lower electricity bills compared to lower-rated models.

What is the maximum spin speed of the Balay 3TS883X?

The Balay 3TS883X has a maximum spin speed of 1000 RPM. This high spin speed allows for more efficient drying of clothes, saving time and energy.

What is the noise level of the Balay 3TS883X during washing?

The noise level of the Balay 3TS883X during washing is 54 dB. This is relatively quiet, ensuring a peaceful environment while the washing machine is running.

Can the opening angle of the Balay 3TS883X door be adjusted?

No, the door opening angle of the Balay 3TS883X is fixed at 90°. This should be taken into consideration when placing the washing machine in a limited space.

Is the manual of the Balay 3TS883X available in English?

Yes, the manual of the Balay 3TS883X is available in English .

Is your question not listed? Ask your question here

No results