Balay 3TS60106A manual

Balay 3TS60106A
7.8 · 14
PDF manual
 · 8 pages
English
manualBalay 3TS60106A
7
Overview of programmes a refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.
Type of laundry
Additional functions; information
algodón/algodão (cottons)frio (cold), 20, 40,60, 90 °C
6 kg
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen]centrif., flot (no spin)algodón/algodão eco (cottons eco)40, 60 °Calgodón/algodão + prelav. (cottons + prewash)60 °Csintéticos (easy-care) frio (cold), 40 °C 3 kgEasy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics]centrif., flot (no spin)delicado (delicates) frio (cold)
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)]centrif., flot (no spin);No spin between rinse cyclesÿ / lana/lã (wool) frio (cold),Handä or machine-washable fabrics made of wool or containing woolParticularly gentle wash programme to prevent shrinkage of laundry. Longer programme breaks (fabrics rest in the detergent solution)
Additional programmes 5 (rinse), 6 (spin), 4 plus (empty)
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments I and II
(depending on model).
9306 / 9000895776

*895776*

3TS60106A ...
Balay Electrogeräte GmbH
CarläWery Str. 34
81739 Munich / Alemania
8

Safety instructions

Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine
is in operation.

Consumption values depending on model

Programme Load Electricity*** Water***
Programme
duration
***
algodón/algodão eco
(cottons eco) 40 °C*
6 kg 0,85 kWh 58 l 01:50 h
algodón/algodão (cottons) 60 °C* 6 kg 1,40 kWh 57 l 02:05 h
algodón/algodão (cottons) 90 °C 6 kg 2,10 kWh 62 l 02:05 h
sintéticos (easy-care) 40 °C* 3 kg 0,55 kWh 48 l 01:15 h
delicado (delicates) frío (cold) 2 kg 0,28 kWh 48 l 00:44 h
ÿ / lana/lã (Wool) frío (cold) 2 kg 0,20 kWh 32 l 00:53 h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed
(depending on model).
Programme Load
Annual energy
consumption
Annual water
consumption
algodón/algodão eco (cottons eco) 40/60 °C** 6/3kg 193 kWh 9600 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to
compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to algodón/algodão (cottons) 60 °C and select inicio (start).
At the end of the programme, turn the programme selector to stop (off).
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
...if it contains detergent or fabric softener residues.
1. Pull the drawer out, press down the insert and fully remove the drawer
from the housing.
2. To remove the insert: press the insert upwards from below with your
finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it. Also remove any detergent or fabric softener residues in the
housing.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
Washing drum and rubber seal
Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so
that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not
be necessary if the correct dosage of detergent is used.

Information to indicator lights

Indicator lights for status displays and/or buttons flash:
Indicator lights
5c(rinse) and
þü(wash) flash
Close the washing machine door properly; laundry may be caught.
Indicator lights
6c(spin) and
þü(wash) flash
Open the tap completely, supply hose kinked or trapped;
Clean the filter a page 10, Water pressure too low.
Indicator lights
6c(spin) and
5c(rinse) flash
Detergent solution pump blocked; Clean the detergent solution pump
a page 10.
Drainage hose/waste pipe blocked; Clean the drainage hose at the
siphon a page 10.
Indicator light
5c(rinse) flashes
Motor fault. Call the after-sales service.
All indicator lights flash Turn off the tap and call the after-sales service.
Risk of electric shock.
Disconnect the mains plug.
Risk of explosion. No solvents.
10

Maintenance

Detergent solution pump
Turn the programme selector to stop (off) and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it in place tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the 4 plus (empty) programme.
Drainage hose at the siphon
Turn the programme selector to stop (off) and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for 6 (spin) // 4 plus (empty)).
3. Select inicio (start). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to stop (off). Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
11

What to do if...

ʑ
Water is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply. Detergent not dispensed. inicio (start) not selected? Tap not turned on?
Filter blocked? Clean the filter a page 10.
Supply hose kinked or trapped?
ʑ
Washing machine door cannot be opened. Safety function active. Wait approx. 2 minutes.
flot (no spin) (without final spin) selected? a page 3, 4.
ʑ
Programme does not start. inicio (start) selected?
Washing machine door closed?
ʑ
Detergent solution is not drained.
flot (no spin) (without final spin) selected? a page 3, 4.
Clean the detergent solution pump a page 10.
Clean the waste pipe and/or drainage hose.
ʑ
Water not visible in the drum. Not a fault - water below the visible area.
ʑ
Unsatisfactory spin result.Laundry wet/too damp. Not a fault - the unbalanced-load detection system has cancelled the spin cycle because of uneven distribution of the laundry.Distribute small and large items of laundry evenly inside the drum. Too low a speed selected? a page 5.
ʑ
Spin cycle performed several times. Not a fault - unbalanced load detection system adjusts the imbalance.
ʑ
Residual water in the compartment for care products. Not a fault - the action of the care product is not affected. Clean the insert if necessary a page 9.
ʑ
Odour formation in the washing machine.
Run programme algodón/algodão (cottons) 90 °C without laundry. Use
standard detergent.
ʑ
Foam escaping from the detergent drawer. Too much detergent used?If foam is escaping from the detergent drawer:Mix 1 tablespoon of fabric softener with ½ litre of water and pour into compartment II (not with outdoor or down fabrics). Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation, vibrations and “walking” during the spin cycle. Are the appliance feet fixed?Secure the appliance feet a Installation instructions. Transportation safety devices removed?Remove the transportation safety devices a Installation instructions.
ʑ
Noises during spin and drain cycles.
Clean detergent-solution pump a page 10.
ʑ
The indicator lights do not function during operation. Power cut? Fuses tripped? Reset/change the fuse. If the fault occurs repeatedly, call the after-sales service.
ʑ
Programme sequence longer than usual. Not a fault - unbalanced load detection system adjusts imbalance by repeatedly distributing the laundry. Not a fault - foam detection system active - adds an additional rinse cycle.
ʑ
Detergent residues on the laundry. Occasionally, phosphate-free detergents contain water-insoluble residues. Select
5 (rinse) or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to stop (off) and remove the mains plug from the socket.
Turn off the water supply and call the after-sales service a Installation instructions.
Instruction manual
en
Washing
machine
Observe the safety instructions on page 8!
Read these instructions and the separate
installation instructions before operating
the washing machine.

View the manual for the Balay 3TS60106A here, for free. This manual comes under the category washing machines and has been rated by 14 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Balay 3TS60106A or do you need help? Ask your question here

Need help?

Do you have a question about the Balay and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 36
V
VosselerJanuary 25, 2019

How long does a 40 degree cotton program last?

This message has been automatically translated
M
MartinaOctober 1, 2019

How do you open the door?

This message has been automatically translated
G
Geoff GillieMay 28, 2024

Which setting is for a lightly soiled speed wash?

S
Sharon March 6, 2023

I somehow have stopped the machine mis cycle how do I restart please

T
TimMay 20, 2023

Lock icon is on. I can’t start machine. How do I unlock it?

N
Norma NolanSeptember 16, 2023

How do I choose a quick wash

How do I choose a quick wash
zoom-in
View photo
A
Alan Tissington December 11, 2023

My Balay wash machine air locks when filling and the water flows out of the soap box area.

V
V smartMay 12, 2024

How do you set the spin speed

R
Ronald EdelmanMay 17, 2024

How to unlock

H
haleMarch 22, 2023

Why is the key lock on and how to cancel

The Balay 3TS60106A washing machine is a freestanding appliance that offers efficient and reliable washing performance. With an energy consumption of 1.02 kWh per cycle, it is designed to be environmentally friendly and energy-efficient. The power consumption of the machine is 2300 W, and it has an energy efficiency class of A+, indicating that it is highly efficient in its operation. Featuring a washing class of A, the Balay 3TS60106A ensures effective cleaning of your laundry. It has a spin-drying class of C, which means it may not remove as much water from the clothes compared to higher-rated models. The noise level during the wash cycle is 58 dB, providing a relatively quiet laundry experience. This washing machine has a water consumption of 47 liters per cycle, helping to conserve water while still achieving optimal cleaning results. The cycle time can reach a maximum of 135 minutes, providing ample time for thorough washing of clothes. Equipped with a 1.6-meter cord length, the Balay 3TS60106A offers flexibility in positioning the appliance within your home. However, it does not have a built-in display, which may limit the visibility of the machine's settings and cycle progress. In summary, the Balay 3TS60106A is a reliable and efficient washing machine with a range of features designed to meet your laundry needs. Its energy-saving capabilities, effective cleaning performance, and moderate noise level make it a suitable choice for households seeking a high-quality washing appliance.

General
BrandBalay
Model3TS60106A | 3TS60106A
Productwashing machine
EAN4242006201449
LanguageEnglish
FiletypeUser manual (PDF)
Power
Energy consumption washing per cycle1.02 kWh
Power consumption (typical)2300 W
A+
Current10 A
Water consumption per cycle47 L
Other features
Power requirements220 - 240V; 50Hz
Washing classA
Design
Built-in displayNo
Appliance placementFreestanding
Loading typeFront-load
Cord length1.6 m
Door hingeLeft
Drum volume53 L
Drum materialStainless steel
Product colorWhite
Performance
Cycle time (max)135 min
Spin-drying classC
Number of washing programs-
Noise level (wash)58 dB
Drum capacity6 kg
Foam control systemYes
Load balancing systemYes
Noise level (spin)74 dB
Minimum spin speed600 RPM
Maximum spin speed1000 RPM
Hygiene/anti-allergy, Black
Weight & dimensions
Weight68000 g
Width597 mm
Depth590 mm
Height847 mm
Packaging data
Package dimensions (WxDxH)660 x 650 x 900 mm
Package weight70000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Balay 3TS60106A below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Balay 3TS60106A?

The Balay 3TS60106A has a weight of 68000 g.

What is the height of the Balay 3TS60106A?

The Balay 3TS60106A has a height of 847 mm.

What is the width of the Balay 3TS60106A?

The Balay 3TS60106A has a width of 597 mm.

What is the depth of the Balay 3TS60106A?

The Balay 3TS60106A has a depth of 590 mm.

Why is my washing machine not turning on?

Ensure that the power cord is securely plugged into a functional power outlet and that the outlet is receiving power. Additionally, check the fuse or circuit breaker that controls the washing machine to ensure it is not tripped or blown.

Why is my washing machine not filling with water?

Confirm that the water supply valves connected to the washing machine are fully open. Verify that the water hoses are not kinked or tangled, and check that the inlet filters are clean and free from any debris.

Why is my washing machine leaking water?

Inspect the water inlet and drain hoses for any signs of damage, such as cracks or loose connections. Additionally, check the detergent dispenser drawer to ensure it is properly closed and not overflowing. Monitor for excessive suds during the washing cycle, as this can cause leakage.

Why is my washing machine not draining?

Clean the drain pump filter, which is typically located at the bottom front of the machine, by removing any lint, debris, or foreign objects. Make sure the drain hose is not clogged or obstructed. It is also advisable to check if the drain hose is securely attached to the drain standpipe or sink.

Why is my washing machine producing excessive vibrations?

Verify that the washing machine is level by adjusting the leveling feet underneath the appliance. Uneven surfaces can cause vibrations during the spin cycle. Additionally, ensure the load inside the machine is balanced and distributed evenly, as an unbalanced load may lead to excessive vibrations.

Does the Balay 3TS60106A have a built-in display?

No, the Balay 3TS60106A does not have a built-in display. This means that users will not be able to see detailed information about the wash cycle, such as remaining time or program settings, directly on the machine.

What is the energy efficiency class of the Balay 3TS60106A?

The energy efficiency class of the Balay 3TS60106A is A+. This means that it is highly energy efficient and will help users save on their electricity bills compared to less efficient models.

How much water does the Balay 3TS60106A consume per cycle?

The Balay 3TS60106A consumes 47 liters of water per cycle. This is relatively low compared to some other washing machines on the market, indicating its water-saving capabilities.

What is the noise level of the Balay 3TS60106A during the wash cycle?

The Balay 3TS60106A has a noise level of 58 dB during the wash cycle. This is considered moderate and should not be overly loud or disruptive to the user.

Does the Balay 3TS60106A have a load balancing system?

Yes, the Balay 3TS60106A has a load balancing system. This means that it can automatically redistribute the load inside the drum during the wash cycle, ensuring optimal balance and reducing vibrations for a quieter and more efficient wash.

Is the manual of the Balay 3TS60106A available in English?

Yes, the manual of the Balay 3TS60106A is available in English .

Is your question not listed? Ask your question here

No results