View the manual for the Balay 3EB969LU here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Balay 3EB969LU or do you need help? Ask your question here




| Brand | Balay |
| Model | 3EB969LU | 3EB969LU |
| Product | stove |
| EAN | 4242006254407 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Built-in |
| Hob type | Zone induction hob |
| Top surface type | - |
| Number of cooking zones | 2 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Number of electric cooking zones | 2 zone(s) |
| Product color | Black |
| Frame type | Frameless |
| Number of simultaneously used cooking zones | 2 |
| Cooking zone 2 diameter | 210 x 400 mm |
| Cooking zone 2 type | Extra large |
| Cooking zone 2 shape | Rectangular |
| Cooking zone 2 position | Right |
| Cooking zone 2 power source | Electric |
| Cooking zone 1 type | Extra large |
| Cooking zone 1 shape | Round |
| Cooking zone 1 position | Left |
| Cooking zone 1 power source | Electric |
| Cooking zone 1 diameter | 280 mm |
| Cooking zone 1 power | 2600 W |
| Built-in display | Yes |
| Timer | Yes |
| Control type | Touch |
| Control position | Front |
| Residual heat indicator | Yes |
| Easy to clean | Yes |
| Child lock | Yes |
| Cleaning lock | Yes |
| Auto power off | Yes |
| Buzzer | Yes |
| Number of power levels | 17 |
| Cord length | 1.1 m |
| Width | 592 mm |
| Depth | 522 mm |
| Height | 51 mm |
| Weight | 13000 g |
| Installation compartment width | 560 mm |
| Installation compartment depth (min) | 490 mm |
| Installation compartment depth (max) | 500 mm |
| Installation compartment height | 65 mm |
| On/off switch | Yes |
| Connected load (electric) | 7400 W |
| Connected load (gas) | 0 W |
| AC input frequency | 50 - 60 Hz |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Balay 3EB969LU below.
The Balay 3EB969LU has a weight of 13000 g.
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.
No, cooking on induction is not dangerous.
The Balay 3EB969LU has a height of 51 mm.
The Balay 3EB969LU has a width of 592 mm.
The Balay 3EB969LU has a depth of 522 mm.
Yes, the Balay 3EB969LU stove has a built-in display. This feature allows users to easily monitor and adjust the settings of the stove.
The Balay 3EB969LU stove has 17 power levels. This gives users a wide range of control over the heat intensity for more precise cooking.
Yes, the Balay 3EB969LU stove is easy to clean. This feature saves users time and effort in maintaining the stove's cleanliness.
Yes, the Balay 3EB969LU stove has a residual heat indicator. This feature provides an added safety measure by indicating when the cooking zones are still hot, reducing the risk of accidental burns.
Yes, the Balay 3EB969LU stove has a child lock. This feature ensures that the stove's settings cannot be accidentally changed by children, promoting safety in the kitchen.
To properly install the Balay 3EB969LU stove, follow these steps: 1. Prepare the fitted units: - Mark the unit cut-out according to the installation diagram. - Ensure that the angle of the cut surface to the worktop is 90°. - Remove any shavings after making the cut-outs. - Seal the cut surfaces with heat-resistant material. 2. Ventilation: - Maintain a minimum clearance between the rear of the unit and the kitchen wall. - Ensure that the opening at the top of the rear of the unit is unobstructed. - If the clearance from the back wall of the unit is less than 20 mm, create an opening on the underside. - Do not hermetically seal the lower base. 3. Installation above a drawer: - Guarantee good ventilation by maintaining a clearance of 65 mm between the surface of the worktop and the upper area of the drawer. 4. Installation above an oven: - Ensure good ventilation by maintaining a clearance of 30 mm between the top of the worktop and the surface of the oven front. - Maintain a minimum clearance of 5 mm between the oven and hob. - Refer to the oven's installation instructions if the clearance needs to be increased. 5. Installing the power cord in the mains socket: - Turn the hob over and place it on a surface to prevent scratches. - Lift up the cover of the mains socket using a screwdriver. - Undo the fastening screw and lift the hose clamp. - Connect the power cord to the mains socket following the provided diagram. - Tighten the screws on the mains socket correctly. - Use the hose clamp to secure the power cord and tighten the fastening screw. - Route the cables into the central area of the mains socket and close the cover. 6. Inserting the hob: - Adjust the hob in the front section of the built-in niche. - Insert the hob in the cut-out. - Seal the tile joints on tiled work surfaces with silicone rubber. 7. Connecting the appliance: - Connect the appliance following the circuit diagram provided. - Check that the appliance is ready for operation and ensure correct connection. Note: If you encounter any issues or have further questions during the installation process, consult the Balay 3EB969LU stove's manual for detailed instructions.
When opening and connecting the Balay 3EB969LU stove, it is important to follow these safety precautions: 1. Before opening the stove: - Ensure that the stove is turned off and disconnected from the power supply. - Allow the stove to cool down completely before attempting any maintenance or connection. 2. Opening the stove: - Use caution when opening the stove door, as it may be hot. - Keep hands and other objects away from the heating elements to avoid burns. 3. Connecting the stove: - Make sure the power cord is in good condition and properly grounded. - Use the correct voltage and electrical connections as specified in the manual. - Avoid using extension cords or adapters, as they may cause electrical hazards. - Follow the provided wiring diagram to connect the stove to the power supply. - Double-check all connections to ensure they are secure and properly insulated. 4. Gas connection (if applicable): - If connecting a gas stove, ensure that the gas supply is turned off before making any connections. - Use a qualified professional to install and connect the gas line, following local regulations and safety guidelines. 5. Ventilation: - Ensure proper ventilation around the stove to prevent the accumulation of gas or fumes. - Keep the area around the stove clear of flammable materials. By following these safety precautions, you can minimize the risk of accidents and ensure the safe opening and connection of the Balay 3EB969LU stove.
Yes, the manual of the Balay 3EB969LU is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Balay and is the answer not in the manual?
Question and answer
Number of questions: 1How do you switch on