View the manual for the BaByliss Pro FX660SE here, for free. This manual comes under the category clippers and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the BaByliss Pro FX660SE or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the BaByliss Pro FX660SE.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BaByliss Pro FX660SE below.
To properly clean and maintain the BaByliss Pro FX660SE clipper, follow these steps: 1. Cleaning the Blades: - Set the blades in the closest cutting position. - Hold the clipper with the blade frame pointing up and push up to slide the blade frame out. - Use the cleaning brush provided to remove hair from the blades. 2. Oiling the Blades: - Occasionally, apply the oil provided with the clippers to the blades. - Use only the recommended oil provided with the clippers, as it is specially formulated for clippers and won't evaporate or slow down the blades. - Avoid using any other product to oil the blades. 3. Reassembling the Blades: - After cleaning, carefully place the blade frame back into the clipper. It is important to regularly clean and oil the blades to maintain optimal performance. By following these steps, you can ensure that your BaByliss Pro FX660SE clipper stays in good condition and continues to provide excellent cutting results.
If the BaByliss Pro FX660SE clipper is not turning on when you press the power button, you can try the following steps to troubleshoot the issue: 1. Check the Battery: - Ensure that the clipper has sufficient battery power. If the battery is weak, wait for about 1 minute and try again. - To extend the battery life, regularly recharge the clipper before the battery is fully exhausted. 2. Use the Mains Power: - Plug the power cord into the clipper and then into a power outlet. - Push the on/off button to switch the clipper on. If the clipper still does not turn on after following these steps, it may indicate a more significant issue. In such cases, it is recommended to contact the manufacturer's customer support for further assistance or consult a professional technician.
To adjust the cutting length on the BaByliss Pro FX660SE clipper, follow these steps: 1. Attaching the Cutting Guides: - Grasp the desired cutting guide by the sides and hold it level with the blade. - Press the cutting guide to lock it into the notches on the sides of the clipper. - The desired cutting length is indicated under the cutting guide's teeth. 2. Removing the Cutting Guides: - Hold the clipper facing the backside and push the back of the guide upwards with your thumb. 3. Adjusting the Blade Length: - Slide the adjustment button on the clipper's handle to lock it into one of the 5 positions. - Each position corresponds to a specific cutting length, which is indicated on both sides of the guide. By following these steps, you can easily adjust the cutting length on the BaByliss Pro FX660SE clipper to achieve your desired haircut or trimming style.
If the BaByliss Pro FX660SE clipper is not cutting hair evenly, you can try the following steps to troubleshoot the issue: 1. Check the Battery: - Ensure that the battery is not weak. If the battery is low, wait for about 1 minute before using the clipper. - To extend the battery life, regularly recharge the clipper before the battery is fully exhausted. 2. Use the Mains Power: - Plug the power cord into the clipper and then into a power outlet. - Push the on/off button to switch the clipper on. 3. Check the Cutting Guides: - Make sure that the cutting guide is securely attached to the clipper. - Grasp the cutting guide by the sides and press it to lock it into the notches on the sides of the clipper. - The desired cutting length is indicated under the cutting guide's teeth. 4. Adjust the Blade Length: - Slide the adjustment button on the clipper's handle to lock it into the desired cutting length position. - Each position corresponds to a specific cutting length, which is indicated on both sides of the guide. By following these steps, you can ensure that the BaByliss Pro FX660SE clipper cuts hair evenly and provides a satisfactory grooming experience.
To determine when the BaByliss Pro FX660SE clipper is fully charged, follow these steps: 1. Charging Time: - The clipper requires approximately 16 hours of charging time before its first use. - Always ensure that the clipper is switched off during the charging process. 2. Indicator Light: - Plug the power cord into the clipper or the charging stand, and then connect it to a power outlet. - Look for the indicator light on the clipper. - When the clipper is charging, the indicator light will illuminate. 3. Full Charge: - The clipper is considered fully charged when the indicator light turns off. - Once the light goes off, it indicates that the battery has reached its maximum capacity. By following these steps, you can determine when the BaByliss Pro FX660SE clipper is fully charged and ready for use. It is important to allow the clipper to charge for the recommended duration to ensure optimal performance and battery life.
Yes, the manual of the BaByliss Pro FX660SE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the BaByliss and is the answer not in the manual?
Question and answer
Number of questions: 0