
Do you have a question about the Axis P7214 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Axis P7214 owners to properly answer your question.



View the manual for the Axis P7214 here, for free. This manual comes under the category Servers and has been rated by 1 people with an average of a 10. This manual is available in the following languages: English. Do you have a question about the Axis P7214 or do you need help? Ask your question here
| Brand | Axis |
| Model | P7214 |
| Product | Server |
| EAN | 115971002332, 7331021002043, 7331021036383, 7331021036406, 7331021036901, 777785901302, 778890555541 |
| Language | English |
| Filetype |
| Motion JPEG frame rate | 30 fps |
| MPEG-4 frame rate | 30 fps |
| Maximum video resolution | 720 x 576 pixels |
| Maximum frame rate | 30 fps |
| NTSC resolutions | 720 x 480 pixels |
| PAL resolutions | 720 x 576 pixels |
| Angle of rotation | 270 ° |
| Wall mountable | ✓ |
| Internal memory | 512 MB |
| Flash memory | 128 MB |
| PTZ control | ✓ |
| Image settings | Brightness,Color,Compression,Contrast,Mirroring,Privacy mask,Rotation |
| Security algorithms | 802.1x RADIUS |
| Video motion detection | ✓ |
| IP address filtering | ✓ |
| Password protection type | ✓ |
| Audio detection | ✓ |
| Active tampering alarm | ✓ |
| Quality of Service (QoS) support | ✓ |
| Wi-Fi | ✗ |
| Supported network protocols | IPv4/v6, HTTP, HTTPS*, IEEE 802.1X*, QoS 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Power over Ethernet (PoE) | ✓ |
| Copper ethernet cabling technology | 100BASE-TX,10BASE-T |
| Microphone in | ✓ |
| Line-in | ✓ |
| BNC input ports | 4 |
| Ethernet LAN (RJ-45) ports | 1 |
| Line-out | ✓ |
| DC-in jack | ✓ |
| RS-485 ports | 1 |
| RS-422 ports | 1 |
| I/O terminal ports | 1 |
| Dimensions (WxDxH) | 109 x 160 x 37 mm |
| Weight | 570 g |
| Built-in processor | ARTPEC-4 |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Power consumption (typical) | 8 W |
| Power requirements | 8-20 V DC |
| Certification | EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC 15 B B, ICES-003 Class B, VCCI B, KCC B, UL/IEC/EN 60950-1 |
Below, you will find the most frequently asked questions about the Axis P7214.
Is your question not listed? Ask your question here