Axis P3717-PLE manual

Axis P3717-PLE
7.8 · 1
PDF manual
 · 20 pages
English
manualAxis P3717-PLE

AXIS P3717–PLE Network Camera

Setup

5. Adjust LED intensity.

How to benet from IR light in low-light conditions using night mode

Your camera uses visible light to deliver color images during the day. As light diminishes, you can set the camera to automatically
shift to night mode. In night mode the camera uses both visible light and near-infrared light to deliver black-and-white images.
Since the camera uses more of the available light it can deliver brighter, more detailed, images.
1. Go to Settings > Image > Day and night, and make sure that the IR cut lter is set to Auto.
2. To determine at what light level you want the camera to shift to night mode, move the Threshold slider toward Bright
or Dark.
Note
If you set the shift to occur when it’s brighter, the image remains sharper as there will be less low-light noise. If you
set the shift to occur when it’s darker, the image colors are maintained longer but there will be more image blur due
to low-light noise.
3. Enable Allow IR illumination and Synchronize IR illumination to use the camera’s built-in IR light when the night
mode is activated.

How to reduce noise in low-light conditions

To reduce noise in low-light conditions, you can adjust one or more of the following settings:
Make sure that the exposure mode is automatic.
Note
Increasing the max shutter value can result in motion blur.
The shutter speed should be as slow as possible, which means you should set max shutter to the highest possible value.
Reduce sharpness in the image.
Try lowering the max gain value.

How to handle scenes with strong backlight

Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be signicant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to Settings > Image.
2. Use the Local contrast slider to adjust the amount of WDR.
Image without WDR.
9

Manual

View the manual for the Axis P3717-PLE here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Axis P3717-PLE or do you need help? Ask your question here

Need help?

Do you have a question about the Axis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Axis P3717-PLE specifications

Below you will find the product specifications and the manual specifications of the Axis P3717-PLE.

General
BrandAxis
ModelP3717-PLE | P3717-PLE
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
Placement supported-
Connectivity technologyWired & Wireless
Network
Ethernet LANYes
Wi-Fi-
Bluetooth-
Design
Form factorBox
Product colorBlack, White
Mounting typeWall
Video
Maximum resolution- pixels
Total megapixels- MP
Camera
Minimum illumination- lx
Image sensor
Sensor typeCMOS
Number of sensors-
Storage
Built-in HDD-
Night vision
Night visionYes
Packaging content
Number of cameras1
Power
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Axis P3717-PLE below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Axis P3717-PLE available in English?

Yes, the manual of the Axis P3717-PLE is available in English .

Is your question not listed? Ask your question here

No results