Axis P3717-PLE manual

Axis P3717-PLE
7.8 · 1
PDF manual
 · 20 pages
English
manualAxis P3717-PLE

AXIS P3717–PLE Network Camera

Specifications

Specifications

To nd the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation.

LED indicators

Status LED
Indication
Unlit
Connection and normal operation.
Green Shows steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during rmware upgrade or reset to factory default.
Amber/Red Flashes amber/red if network connection is unavailable or lost.

Status LED behavior for focus assistant

The status LED ashes when the Focus Assistant is active.
Color
Indication
Red The image is out of focus.
Adjust the lens.
Amber The image is close to focus.
The lens needs ne tuning.
Green
The image is in focus.

SD card slot

NONO
NO
TICETICE
TICE
Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your ngers to insert and remove the card.
Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports SD/SDHC/SDXC cards.
For SD card recommendations, see axis.com
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:
Resetting the product to factory default settings. See How to reset to factory default settings on page 15.
Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED ashes green.
18

Manual

View the manual for the Axis P3717-PLE here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Axis P3717-PLE or do you need help? Ask your question here

Need help?

Do you have a question about the Axis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Axis P3717-PLE specifications

Below you will find the product specifications and the manual specifications of the Axis P3717-PLE.

General
BrandAxis
ModelP3717-PLE | P3717-PLE
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
Placement supported-
Connectivity technologyWired & Wireless
Network
Ethernet LANYes
Wi-Fi-
Bluetooth-
Design
Form factorBox
Product colorBlack, White
Mounting typeWall
Video
Maximum resolution- pixels
Total megapixels- MP
Camera
Minimum illumination- lx
Image sensor
Sensor typeCMOS
Number of sensors-
Storage
Built-in HDD-
Night vision
Night visionYes
Packaging content
Number of cameras1
Power
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Axis P3717-PLE below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Axis P3717-PLE available in English?

Yes, the manual of the Axis P3717-PLE is available in English .

Is your question not listed? Ask your question here

No results