Axis P3717-PLE manual

Axis P3717-PLE
7.8 · 1
PDF manual
 · 20 pages
English
manualAxis P3717-PLE

AXIS P3717–PLE Network Camera

Setup

3. Make sure you have set up the application according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
7. From the list of actions, select Record video.
8. Select an existing stream prole or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10. Enable While the rule is active.
11. Enable and set the post-trigger time to 60 seconds.
12. Select SD card from the list of storage options.
13. Click Ok.

How to automatically send an email if someone spray paints the lens

1. Go to System > Detectors.
2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
Create an action rule:
4. Go to Events > Action rules and add an action rule.
5. Enter a name for the action rule.
6. From the list of triggers, select Detectors and then select Tampering.
7. From the list of actions, select Send Notication and then select a recipient from the list or click New Recipient
to create a new recipient.
8. Enter name and address for the email.
9. Click Ok.

Applications

About applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To nd out more about available applications, downloads, trials and licenses, go to axis.com/applications
To nd the user manuals for Axis applications, go to axis.com
Note
Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
14

Manual

View the manual for the Axis P3717-PLE here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Axis P3717-PLE or do you need help? Ask your question here

Need help?

Do you have a question about the Axis and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Axis P3717-PLE specifications

Below you will find the product specifications and the manual specifications of the Axis P3717-PLE.

General
BrandAxis
ModelP3717-PLE | P3717-PLE
Productsecurity camera
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
Placement supported-
Connectivity technologyWired & Wireless
Network
Ethernet LANYes
Wi-Fi-
Bluetooth-
Design
Form factorBox
Product colorBlack, White
Mounting typeWall
Video
Maximum resolution- pixels
Total megapixels- MP
Camera
Minimum illumination- lx
Image sensor
Sensor typeCMOS
Number of sensors-
Storage
Built-in HDD-
Night vision
Night visionYes
Packaging content
Number of cameras1
Power
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Axis P3717-PLE below.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

Is the manual of the Axis P3717-PLE available in English?

Yes, the manual of the Axis P3717-PLE is available in English .

Is your question not listed? Ask your question here

No results