Avanti STW20D2P manual

Avanti STW20D2P
6.4 · 1
PDF manual
 · 53 pages
English
manualAvanti STW20D2P
2

TABLE OF CONTENTS

Appliance Safety
3
Important Safeguides
4
Help Us Help You / If You Need Service
5
Parts, Features, and Accessories
6
Important Safety Instructions
7
Installation Instructions
8
Before Using Your Portable Washer
8
Selecting a Location
8
Installing the Noise Damper Plate
9
Connecting the Water Supply Hoses / Sink Faucet Connection
9 10
Disconnecting the Water Supply Hoses / Positioning the Drain Hose
10
Electrical Connection / Extension Cords
11
Control Panel / Functions Description
12
Operating Your Portable Washer
13
Preparation / Before Washing
13 14
Operating Instructions
15
Manual Function (Custom Washing Cycle) /Automatic Wash Program
15 18
Delayed Start (Preset) Setting / Child-Proof Setting
Adding / Removing Clothing After the Cycle Starts
19
Care and Maintenance
20
Problems with Your Portable Washer
21
Troubleshooting Guide / Service for Your Portable Washer
21
Your Avanti Products Warranty / What is not Covered
22
Instrucciones en Español
23 29
Instructions en Français
30 - 51
Registration Information and Registration Card
Last
Page

Manual

View the manual for the Avanti STW20D2P here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Avanti STW20D2P or do you need help? Ask your question here

Need help?

Do you have a question about the Avanti and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
C
cherry connollyJanuary 3, 2024

I have an E3 code. Avanti washing machine stw20d2p

1 comment
C
Cheryl ConnollyJanuary 4, 2024

Error E3 despite lid being closed. What is the part and NUMBER to fix this problem? and what is the cost?

Avanti STW20D2P specifications

Below you will find the product specifications and the manual specifications of the Avanti STW20D2P.

The Avanti STW20D2P is a freestanding washing machine with a drum volume of 56.6 liters, providing ample space for washing clothes. With the option to fill with both cold and hot water, it offers versatility in choosing the most suitable temperature for different types of fabrics. The washing machine features a convenient delayed start timer, allowing users to set a specific time for the wash cycle to begin. This can be helpful for those who want to take advantage of off-peak electricity hours or have laundry ready at a particular time. In terms of energy efficiency, the Avanti STW20D2P consumes 70 kWh annually for washing, which can contribute to long-term savings on electricity bills. With a width of 552 mm, depth of 565 mm, and height of 952.5 mm, this washing machine has a compact design that can fit well into various laundry spaces. When it comes to packaging, the machine is delivered with dimensions of 628.65 mm in width, depth, and 1009.65 mm in height. The washing machine itself weighs 36287 g, indicating a sturdy construction. Overall, the Avanti STW20D2P offers a practical and efficient solution for laundry needs. Its sturdy build, ample drum size, and flexibility in water temperature make it suitable for a range of fabric types. The added features, such as the delayed start timer, contribute to its convenience and ease of use. Additionally, its compact size allows for flexible placement in a variety of laundry areas.

General
BrandAvanti
ModelSTW20D2P | STW20D2P
Productwashing machine
EAN0079841402007
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF), Energy label (PDF)
Design
Drum volume56.6 L
Appliance placementFreestanding
Loading typeTop-load
Product colorBlack, Platinum
Water fillCold, Hot
Door hingeUp
Control typeButtons
Built-in displayYes
Performance
Delayed start timerYes
Noise level (spin)- dB
Noise level (wash)- dB
Drum capacity- kg
Maximum spin speed- RPM
Spin-drying class-
Number of washing programs-
Adjustable temperatureYes
Ergonomics
Child lock-
Other features
Annual energy consumption washing70 kWh
Weight & dimensions
Width552 mm
Depth565 mm
Height952.5 mm
Weight36287 g
Packaging data
Package width628.65 mm
Package depth628.65 mm
Package height1009.65 mm
Package weight43091 g
Power
AC input voltage120 V
AC input frequency60 Hz
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Avanti STW20D2P below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Avanti STW20D2P?

The Avanti STW20D2P has a weight of 36287 g.

What is the height of the Avanti STW20D2P?

The Avanti STW20D2P has a height of 952.5 mm.

What is the width of the Avanti STW20D2P?

The Avanti STW20D2P has a width of 552 mm.

What is the depth of the Avanti STW20D2P?

The Avanti STW20D2P has a depth of 565 mm.

Does the Avanti STW20D2P have a large drum volume?

Yes, the Avanti STW20D2P has a drum volume of 56.6 L, which is considered to be quite large. This means that it can accommodate a significant amount of laundry, making it suitable for households with larger loads.

Can the Avanti STW20D2P be placed anywhere in the room?

Yes, the Avanti STW20D2P is a freestanding washing machine, which means it can be placed anywhere in the room without the need for installation or mounting. This gives users more flexibility in choosing the location for their appliance.

Does the Avanti STW20D2P have the option for both hot and cold water fill?

Yes, the Avanti STW20D2P offers both cold and hot water fill options. This allows users to customize their wash cycles according to their preference and the type of laundry being washed.

Can the Avanti STW20D2P be programmed to start at a specific time?

Yes, the Avanti STW20D2P has a delayed start timer. This means that users can set the washing machine to start at a specific time, even if they are not present. This feature can be convenient for those with busy schedules or for saving energy by utilizing off-peak hours.

How does the annual energy consumption of the Avanti STW20D2P compare to other washing machines?

The Avanti STW20D2P has an annual energy consumption of 70 kWh. This is relatively low compared to other washing machines on the market, indicating that the appliance is energy-efficient and can help users save on their electricity bills.

How do I connect the water hose and power plug of the Avanti STW20D2P washing machine?

To connect the water hose and power plug of the Avanti STW20D2P washing machine, follow these steps: 1. Connect the water inlet hose to the water faucet. Make sure the water faucet is turned on. 2. Plug in the power supply cord. 3. Insert the end of the drain hose into the hook shelf and hang the drain hose over a drain outlet. It is important to note that you should never try to connect the grounding wire of the washing machine with that of a gas pipe, water pipe, telephone cord, or lightning rod. Also, make sure not to use a damaged power supply cord, as it could cause electrical leakage and fire. If the cord is damaged, call a local service company to change it. Please refer to the manual for any additional information or specific instructions related to the Avanti STW20D2P washing machine.

Why is the washing machine not switching on when I press the power button?

If the Avanti STW20D2P washing machine is not switching on when you press the power button, you can follow these steps to troubleshoot the issue: 1. Check if the power supply cord is properly plugged into the socket. Ensure that the plug has a reliable grounding connection. 2. Verify that the power outlet is functioning correctly by plugging in another device and checking if it powers on. 3. Make sure that the water inlet hose is connected to the water faucet and the faucet is turned on. The washing machine may not switch on if the water pressure is lower than 0.05MPa or higher than 0.5MPa. 4. Inspect the power supply cord for any damage. If the cord is damaged, it could cause electrical leakage and prevent the washing machine from switching on. In such cases, it is recommended to call a local service company to replace the cord. 5. If the issue persists, it is advisable to consult a technician or contact the Avanti customer support for further assistance. Please note that these troubleshooting steps are general guidelines, and it is always recommended to refer to the Avanti STW20D2P washing machine manual or contact the manufacturer for specific troubleshooting instructions.

How do I choose the wash temperature on the Avanti STW20D2P washing machine?

To choose the wash temperature on the Avanti STW20D2P washing machine, follow these steps: 1. Press the power button to turn on the washing machine. 2. Press the water temperature selection button. You will see options for cold, warm, and hot water. 3. Choose the desired wash temperature by selecting the corresponding button. - If you want to wash with cold water only, select the "COLD" button. - If you want to wash with hot water only, select the "HOT" button. - If you want to wash with a combination of cold and hot water, select the "WARM" button. Please note that regardless of the temperature setting, the washing machine will provide a cold rinse. It is important to understand that if you have a single cold hose system, the washing machine may not be able to automatically regulate the incoming water temperature to match the selected temperature setting. For more detailed information or specific instructions, please refer to the Avanti STW20D2P washing machine manual or contact the manufacturer's customer support.

Why is the wash temperature not changing when I press the water supply button?

The wash temperature may not be changing when you press the water supply button on the Avanti STW20D2P washing machine due to the following reasons: 1. Incorrect water temperature selection: Ensure that you are pressing the correct water temperature selection button. The options available are cold, warm, and hot water. 2. Cold rinse in all temperature settings: It is important to note that regardless of the temperature setting chosen, the washing machine will provide a cold rinse. This is a normal feature of the machine. 3. Single cold hose system limitation: If you have a single cold hose system, the washing machine may not be able to automatically regulate incoming water temperatures to match the selected temperature settings such as warm or hot. In such cases, the machine will use water supplied by the cold water inlet. If the issue persists, it is recommended to check the water supply, ensure proper installation of the hoses, and consult the Avanti customer support for further assistance. Please note that these troubleshooting steps are general guidelines, and it is always recommended to refer to the Avanti STW20D2P washing machine manual or contact the manufacturer for specific troubleshooting instructions.

What should I do if the water level does not correspond to the size of the load in the Avanti STW20D2P washing machine?

If the water level does not correspond to the size of the load in the Avanti STW20D2P washing machine, you can try the following steps to troubleshoot the issue: 1. Check the load size: Ensure that you are not overloading or underloading the washing machine. Overloading can prevent the water from reaching the desired level, while underloading may result in excessive water. 2. Select the appropriate water level: The Avanti STW20D2P washing machine offers different water level options, such as small, medium, and large. Make sure to select the water level that corresponds to the size of your load. 3. Check the water supply: Ensure that the water supply is sufficient and the water pressure is within the recommended range (0.05MPa to 0.5MPa). Low water pressure can affect the water level in the machine. 4. Inspect the water inlet hose: Check if the water inlet hose is properly connected and not kinked or blocked. Any obstruction can restrict the water flow and affect the water level. 5. Consult the Avanti customer support: If the issue persists, it is advisable to contact the Avanti customer support for further assistance and guidance. Please note that these troubleshooting steps are general guidelines, and it is always recommended to refer to the Avanti STW20D2P washing machine manual or contact the manufacturer for specific troubleshooting instructions.

How do I connect the water hose to the Avanti STW20D2P washing machine?

To connect the water hose to the Avanti STW20D2P washing machine, follow these steps: 1. Make sure you have the water inlet hose and the necessary adapters provided with the washing machine. 2. Identify the cold water faucet in your kitchen sink. The Avanti STW20D2P washing machine is designed to be connected to the cold water supply only. 3. Attach the male hose thread adapter to the end of the water inlet hose. Turn it clockwise to secure it tightly. Ensure that the rubber ring is inserted into the adapter. 4. Connect the water inlet hose to the cold water faucet by turning the connecting nut clockwise. If your faucet requires it, use the female hose thread adapter between the male adapter and the faucet. Make sure the rubber ring is inserted. 5. Once the water hose is securely connected to the faucet, check for any leaks. If there are any leaks, turn off the water supply, and use a wrench to tighten the connections. Be careful not to over-tighten and damage the water connection. Please note that these instructions are specific to the Avanti STW20D2P washing machine and may vary for other models or brands.

Why is the washing machine not turning on when I switch on the power supply?

If the Avanti STW20D2P washing machine is not turning on when you switch on the power supply, you can try the following steps to troubleshoot the issue: 1. Check if the washing machine is plugged in properly. Ensure that the power cord is securely connected to a functioning power outlet. 2. Verify if the circuit breaker has tripped or if there is a blown fuse. Reset the circuit breaker or replace the fuse if necessary. 3. Make sure that the lid of the washing machine is closed properly. The machine will not start if the lid is not securely closed. 4. Ensure that the water source is turned on. If there is no water or insufficient water supply, the washing machine may not start. Check if the water source faucet is fully open. 5. Check if the water inlet hose is bent or frozen. Straighten the hose if it is bent, and thaw it if it is frozen. 6. Inspect the filter on the water intake hose. If it is clogged, clean or replace the filter. If the issue persists after following these steps, it is recommended to contact Avanti customer service for further assistance.

How do I choose the wash temperature on the Avanti STW20D2P washing machine?

To choose the wash temperature on the Avanti STW20D2P washing machine, follow these steps: 1. Press the power button to turn on the washing machine. 2. Press the water temperature selection button. You will see options for cold, warm, and hot water. 3. Choose the desired wash temperature by pressing the corresponding button. For example, if you want to wash with warm water, press the warm water button. 4. Please note that regardless of the temperature setting, the washing machine will provide a cold rinse. 5. Once you have selected the desired wash temperature, proceed with selecting other functions or settings, such as water level and wash cycle. 6. Press the start/pause button once to begin the operation of the washing machine. Remember that if you have a single cold hose system, the washing machine may not be able to automatically regulate incoming water temperatures to match the selected temperature settings. These steps should help you choose the appropriate wash temperature for your laundry needs using the Avanti STW20D2P washing machine.

Why is the water not filling up in the washing machine during the wash cycle?

If the water is not filling up in the Avanti STW20D2P washing machine during the wash cycle, you can try the following steps to troubleshoot the issue: 1. Ensure that the water supply is turned on and that there is sufficient water pressure. Check if other faucets in your home are receiving water properly. 2. Verify that the water inlet hose is properly connected to the washing machine and the water source faucet. Make sure the connections are secure and not leaking. 3. Check if the water inlet filters are clogged. These filters are located at the end of the water inlet hose and can become blocked by debris. Clean the filters if necessary. 4. Make sure the water level setting is appropriate for the load size. If the water level is set too low, the machine may not fill up with enough water. Adjust the water level setting accordingly. 5. If the above steps do not resolve the issue, there may be a problem with the water inlet valve or the electronic control board. In this case, it is recommended to contact Avanti customer service for further assistance. By following these steps, you can troubleshoot the issue of the water not filling up in the Avanti STW20D2P washing machine during the wash cycle.

How do I adjust the water level according to the load size on the Avanti STW20D2P washing machine?

To adjust the water level according to the load size on the Avanti STW20D2P washing machine, follow these steps: 1. Load your laundry into the washing machine drum. Make sure not to overload the machine, as this can affect the washing performance. 2. Press the power button to turn on the washing machine. 3. Select the desired wash cycle by turning the cycle selector knob to the appropriate setting. 4. Press the water level button to adjust the water level according to the load size. The available options may include small, medium, and large. 5. Choose the water level that corresponds to the amount of laundry you have loaded. For smaller loads, select the small water level. For larger loads, select the medium or large water level. 6. Once you have selected the desired water level, proceed with selecting other functions or settings, such as wash temperature and wash time. 7. Press the start/pause button once to begin the operation of the washing machine. By following these steps, you can adjust the water level according to the load size on the Avanti STW20D2P washing machine.

How do I connect the water hose to the Avanti STW20D2P washing machine?

To connect the water hose to the Avanti STW20D2P washing machine, follow these steps: 1. Make sure you have the water inlet hose and the necessary adapters provided with the washing machine. 2. Identify the cold water faucet in your kitchen sink. The Avanti STW20D2P washing machine is designed to be connected to a normal kitchen sink tap with cold water inlet. 3. Attach the male hose thread adapter to the end of the water inlet hose. Turn it clockwise to fix it tightly, ensuring that the rubber ring enclosed is inserted. 4. Connect the water inlet hose to the cold water faucet by turning the connecting nut. If your faucet requires it, use the female hose thread adapter between the male adapter and the faucet. Make sure the rubber ring is inserted. 5. Tighten the connection fully using a wrench, but be careful not to over tighten and damage the water connection. 6. Once the water hose is securely connected, turn on the water supply and check for any leaks. If there are any leaks, turn off the water, tighten the connections further, and then turn on the water supply again to ensure there are no leaks. By following these steps, you will be able to connect the water hose to the Avanti STW20D2P washing machine and ensure a proper water supply for your laundry needs.

Why is the washing machine not turning on when I switch on the power supply?

If the Avanti STW20D2P washing machine is not turning on when you switch on the power supply, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the power cord is securely plugged into a functioning power outlet. If the power outlet is controlled by a switch, make sure it is turned on. 2. Verify the power cord: Inspect the power cord for any damage or loose connections. If the power cord is damaged, it should be replaced by a qualified technician. 3. Check the water supply: The washing machine may have a safety feature that prevents it from turning on if the water pressure is too low or too high. Ensure that the water faucet connected to the machine is turned on and that the water pressure is within the recommended range (between 0.05MPa and 0.5MPa). 4. Reset the machine: Try resetting the washing machine by unplugging it from the power outlet, waiting for a few minutes, and then plugging it back in. This can sometimes resolve minor electrical issues. If the washing machine still does not turn on after following these steps, it is recommended to contact a qualified technician or the local service company for further assistance.

How do I choose the wash temperature on the Avanti STW20D2P washing machine?

To choose the wash temperature on the Avanti STW20D2P washing machine, follow these steps: 1. Press the power button to turn on the washing machine. 2. Press the water temperature selection button. You will see options for cold, warm, and hot water. 3. Choose the desired wash temperature by pressing the corresponding button. For example, if you want to wash with warm water, press the warm water button. 4. Note that regardless of the temperature setting, the washing machine will provide a cold rinse. 5. Check the indicator lights to confirm your selection. The "COLD" light indicates that only cold water will be used, the "HOT" light indicates that only hot water will be used, and the "WARM" light indicates that both cold and hot water will be used. 6. Once you have selected the desired wash temperature, proceed with selecting other functions or settings as needed. By following these steps, you can easily choose the wash temperature on the Avanti STW20D2P washing machine to suit your laundry needs.

Why is the water not filling up in the washing machine during the wash cycle?

If the water is not filling up in the Avanti STW20D2P washing machine during the wash cycle, you can try the following steps to troubleshoot the issue: 1. Check the water supply: Ensure that the water faucet connected to the washing machine is turned on and that there is an adequate water supply. Make sure there are no kinks or blockages in the water inlet hose. 2. Verify the water level setting: Press the water level button on the control panel to select the appropriate water level setting for your wash load. Ensure that you have chosen a water level that is suitable for the amount of laundry you are washing. 3. Check for clogged filters: The washing machine may have filters that can become clogged over time. Locate the filters (usually at the back of the machine) and clean them if necessary. Refer to the manual for instructions on how to access and clean the filters. 4. Inspect the water inlet valve: The water inlet valve controls the flow of water into the washing machine. Check if the valve is clogged or malfunctioning. If needed, clean or replace the water inlet valve. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact the Avanti customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot the issue of water not filling up in the Avanti STW20D2P washing machine during the wash cycle.

How do I adjust the water level according to the load size on the Avanti STW20D2P washing machine?

To adjust the water level according to the load size on the Avanti STW20D2P washing machine, follow these steps: 1. Load your laundry into the washing machine drum. Make sure not to overload the machine, as this can affect the washing performance. 2. Press the water level button on the control panel. You will see options for different water levels, such as low, medium, and high. 3. Choose the appropriate water level setting based on the size of your load. For smaller loads, select the low water level. For medium-sized loads, choose the medium water level. And for larger loads, opt for the high water level. 4. Once you have selected the desired water level, proceed with selecting other functions or settings as needed. 5. It's important to note that selecting a higher water level may result in increased water consumption, so it's recommended to choose the appropriate water level based on the size of your load. By following these steps, you can easily adjust the water level according to the load size on the Avanti STW20D2P washing machine, ensuring efficient and effective washing results.

How do I connect the water hose and power plug of the Avanti STW20D2P washing machine?

To connect the water hose and power plug of the Avanti STW20D2P washing machine, follow these steps: 1. Connect the water inlet hose to the water faucet. 2. Turn on the water faucet. 3. Plug in the power supply cord. 4. Insert the end of the drain hose into the hook shelf. 5. Hang the drain hose over a drain outlet. Make sure to use a three-jack socket for the power supply connection and ensure that the socket has a reliable grounding wire. Do not attempt to modify the grounding wire of the washing machine. If the power supply cord is damaged, contact the local service company to replace it. Never connect the grounding wire of the washing machine with that of a gas pipe, water pipe, telephone cord, or lightning rod. Please note that these instructions are based on the Avanti STW20D2P washing machine manual.

Can I adjust the temperature settings for washing on the Avanti STW20D2P washing machine?

Yes, you can adjust the temperature settings for washing on the Avanti STW20D2P washing machine. Here are the steps: 1. Press the power button to turn on the washing machine. 2. Press the water temperature selection button. 3. Choose the desired temperature setting from the options available, such as cold, warm, or hot water. 4. Please note that the washing machine will provide a cold rinse in all temperature settings. 5. The indicator lights will show the selected temperature setting: - When the "COLD" indicator light is on, it means the washing machine will only use water supplied by the cold water inlet. - When the "HOT" indicator light is on, it means the washing machine will only use water supplied by the hot water inlet. - When the "WARM" indicator light is on, it means the washing machine will use water supplied by both the cold and hot water inlets. Remember that a single cold hose system does not allow the washing machine to automatically regulate incoming water temperatures to match those listed on the control panel, such as warm or hot. These instructions are based on the Avanti STW20D2P washing machine manual.

How do I select the wash temperature on the Avanti STW20D2P washing machine?

To select the wash temperature on the Avanti STW20D2P washing machine, follow these steps: 1. Press the power button to turn on the washing machine. 2. Press the water temperature selection button. 3. Choose the desired temperature setting from the options available, such as cold, warm, or hot water. 4. Please note that the washing machine will provide a cold rinse in all temperature settings. 5. The indicator lights will show the selected temperature setting: - When the "COLD" indicator light is on, it means the washing machine will only use water supplied by the cold water inlet. - When the "HOT" indicator light is on, it means the washing machine will only use water supplied by the hot water inlet. - When the "WARM" indicator light is on, it means the washing machine will use water supplied by both the cold and hot water inlets. Remember that a single cold hose system does not allow the washing machine to automatically regulate incoming water temperatures to match those listed on the control panel, such as warm or hot. These instructions are based on the Avanti STW20D2P washing machine manual.

How much detergent should I add to the Avanti STW20D2P washing machine?

To determine the amount of detergent to add to the Avanti STW20D2P washing machine, follow these steps: 1. Check the detergent box or bottle for dosage instructions. 2. Based on the recommended dosage, measure the appropriate amount of detergent using the provided measuring cap or a measuring cup. 3. Open the detergent box or bottle and pour the measured detergent into the detergent dispenser drawer. 4. Close the detergent dispenser drawer securely. 5. Please note that the amount of detergent may vary depending on the size of the wash load and the level of dirtiness. 6. It is important not to exceed the maximum detergent level indicated on the detergent dispenser drawer. 7. Using too much detergent can result in excessive suds, poor rinsing, and potential damage to the washing machine. Remember to always follow the detergent manufacturer's instructions for the best washing results and to avoid any issues with the Avanti STW20D2P washing machine. These instructions are based on the Avanti STW20D2P washing machine manual.

What should I do to prepare the wash load before using the Avanti STW20D2P washing machine?

To prepare the wash load before using the Avanti STW20D2P washing machine, follow these steps: 1. Sort the laundry by color and fabric type. Separate whites, light colors, and dark colors to prevent color bleeding and fabric damage. 2. Check the care labels on the clothing items for specific washing instructions. Pay attention to temperature settings, recommended wash cycles, and any special care requirements. 3. Empty all pockets and remove any items that may cause damage to the washing machine or other garments, such as coins, keys, or sharp objects. 4. Shake out each garment to remove any loose dirt or debris. 5. Load the garments loosely into the washing machine, making sure not to overload it. Leave enough space for the water and detergent to circulate freely. 6. Close the wash lid securely before starting the wash cycle. 7. If desired, add the appropriate amount of detergent to the detergent dispenser drawer based on the wash load volume and detergent manufacturer's instructions. 8. Select the desired wash cycle and temperature settings according to the care labels and your preferences. 9. Press the start button to begin the wash cycle. By following these steps, you can properly prepare the wash load before using the Avanti STW20D2P washing machine. These instructions are based on the Avanti STW20D2P washing machine manual.

Is the manual of the Avanti STW20D2P available in English?

Yes, the manual of the Avanti STW20D2P is available in English .

Is your question not listed? Ask your question here

No results