AudioSource AMP 100 manual

AudioSource AMP 100
(1)
  • Number of pages: 4
  • Filetype: PDF

OWNER’S MANUAL

AMP 100

AudioSource®
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
ww
w.audiosource.net
AMP 100 Owner
s Manual
Congratulations on your purchase of the AudioSourc AMP 100.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
Please read your warranty and retain your receipt and original carton
for possible future use.
For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net

AMP 100

Home Audio Multi-Zone Stereo Power Amplifier

FEATURES:

Line 1 / Line 2 priority input switching
Line 2 auxiliary output
Speaker A/B switching
Front panel Balance and Volume controls
Signal sensing “Power On”

SPECIFICATIONS

Stereo (8 ohm): 50W per channel, 20Hz ~ 20kHz, <1% THD+N
60W per channel, 1kHz, <1% THD+N
Stereo (4 ohm): 60W per channel, 20Hz ~ 20kHz, <1% THD+N
75W per channel, 1kHz, <1% THD+N
Bridged Mono (8 ohm): 160W, 1kHz, <1% THD+N
Frequency Response: 10Hz ~ 30kHz, +0dB/ -3dB
Signal to Noise Ratio: 100dBA below 50W output into 8 ohms
Channel Separation: 65dB @ 1kHz, referred to 50W output
into 8 ohms
Input Sensitivity: 900mV input for rated 50W output
into 8 ohms
AC Power Consumption: 500W maximum
Net Weight: 9.6lbs / 4.4kgs
Gross Weight: 10.8lbs / 4.9kgs
2.9”
(74mm)
16.5” (419mm)
9.5”
(242mm)
Left
Right
Balance
Volume
SPEAKERS
A B
AMP 100
STEREO POWER AMPLIFIER
Min
Max
POWER
AudioSource AMP 100

Need help?

Number of questions: 0

Do you have a question about the AudioSource AMP 100 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other AudioSource AMP 100 owners to properly answer your question.

View the manual for the AudioSource AMP 100 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the AudioSource AMP 100 or do you need help? Ask your question here

AudioSource AMP 100 specifications

General
Brand AudioSource
Model AMP 100
Product Receiver
EAN 132017524467, 267352568798, 41087001658, 777779968038
Language English
Filetype PDF
Audio
Audio output channels 2.0 channels
Peak power per channel - W
Amplifier class A/B
Total Harmonic Distortion (THD) 1 %
Signal-to-Noise Ratio (SNR) 100 dB
Frequency range 20 - 20000 Hz
RMS power output per channel (4 Ohm) 60 W
RMS power output per channel (8 Ohm) 50 W
Bridge-mode power output per channel (8 Ohm) 160 W
Ports & interfaces
Speakers connectivity type Binding post
Line inputs (RCA) 2
Line outputs (RCA) 1
Technical details
Product colour Black
Purpose Home
Connectivity technology Wired
Multi-Zone capability
Volume control Rotary
On/off switch
Power
AC input frequency 60 Hz
Power consumption (typical) 500 W
AC input voltage 117 V
Weight & dimensions
Width 419 mm
Depth 242 mm
Height 74 mm
Weight 4400 g
Packaging data
Package weight 4900 g
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the AudioSource AMP 100.

Is your question not listed? Ask your question here