Audio-Technica ATW-T210a manual

Audio-Technica ATW-T210a
7.5 · 1
PDF manual
 · 1 page
manualAudio-Technica ATW-T210a

Frequency-agile UHF UniPak


Body-pack Transmitter


Rugged housing with a reversible clothing clip
Recessed locking HRS-type microphone input connector
LED “on indicator
10 compatible user-switchable channels in one of two UHF
frequency ranges
Microphone or line input with DC bias voltage
Internal channel selector switch
Internal trim controls for mic and line inputs
Integrated two-position top-mounted power/mute switch
Digital Tone Lock™ to identify the wireless transmitter to the receiver
Operates on two AA batteries
Field replaceable whip antenna
The ATW-T210a wireless UniPak
body-pack transmitter has both low- and
high-impedance input connections along with a DC bias voltage connec-
tion for use with dynamic and electret condenser microphones as well as
Hi-Z instrument pickups. Separate input trim controls are provided for
each input along with a ten-position channel selector switch. All adjust-
ment controls are hidden behind the transmitter’s battery door and an
adjustment tool is provided with the transmitter. A locking 4-pin HRS-type
input connector is provided for both inputs. The connector is recessed to
protect the connection and input cable. Sophisticated Tone Lock
squelch eliminates the need for a separate mute button allowing the
two-position, positive-action mechanical switch to function for both
power and mute. The switch is located on the top of the transmitter
for easy access and can be operated without looking at the transmitter.
An RF power select switch offers high and low settings. A battery
condition indicator shows that the batteries are good. The transmitter
operates on two standard AA batteries providing over eight hours of
continuous operation. Constructed of rugged high-impact materials, the
transmitter incorporates a latching captive battery door, eld replaceable
antenna and reversible belt clip.
Architect’s and Engineers Specications
The frequency-agile FM wireless body-pack transmitter shall be part of
a wireless system offered in two UHF bands, 656.125 678.500 and
487.125 506.500 MHz. The body-pack transmitter shall have inputs for
microphone and line level inputs. It shall provide DC voltage to power
microphones requiring DC bias. The body-pack transmitter shall have a
reversible clip allowing for up or down cable entry. A two-position
positive-action mechanical power/mute switch operable without looking at
the transmitter shall be provided. Transmitters using separate mute and
power buttons shall be unacceptable. The transmitter shall have a recessed
input connector and illuminated indicator to indicate battery condition. Ten
selectable channels shall be available. Channel selection shall be via a
recessed rotary selector and the proper tool shall be included with the
transmitter. The device shall have an LED indicator when it is turned on.
There shall be individual trim adjustments on each input. The transmitter shall
include a Tone Lock
to identify the wireless transmitter to the wireless
receiver. This transmitter shall operate on two AA batteries and provide an
RF power select switch with high and low settings. All channel settings and
level adjustments shall be hidden behind a latching cover to prevent
unnecessary access. The transmitter shall have a removable and eld
replaceable antenna.
The FM wireless transmitter shall be an Audio-Technica ATW-T210a
or equivalent.
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
Specications are subject to change without notice.

2000 series wireless systems

High: 30 mW, Low: 10 mW
Following federal and national regulations
Four-pin locking connector
Pin 1: GND
Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries
(with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC
- - -
230 mA x2
Other world areas: 3.2 V DC
- - -
320 mA x2
High: 7 hours (alkaline), Low: 9 hours (alkaline)
Depending on battery type and use pattern
66.0 mm (2.60") W x 22.5 mm (0.89") D x
92.3 mm (3.63") H
81 g (2.9 oz), without batteries
RF power output (50 ohms)
Spurious emissions
Input connection
Battery life
Net weight
Audio-Technica Corporation ©2014 Audio-Technica 0001-0033-02


View the manual for the Audio-Technica ATW-T210a here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Audio-Technica ATW-T210a or do you need help? Ask your question here

Need help?

Do you have a question about the Audio-Technica ATW-T210a and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Audio-Technica ATW-T210a owners to provide you with a good answer.

Number of questions: 0

Audio-Technica ATW-T210a specifications

Below you will find the product specifications and the manual specifications of the Audio-Technica ATW-T210a.

Brand Audio-Technica
Model ATW-T210a
Product Not categorized
Language English
Filetype Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Audio-Technica ATW-T210a below.

Is your question not listed? Ask your question here

No results