Atlona HDVS-200-TX-WP manual

Atlona HDVS-200-TX-WP
6.9 · 1
PDF manual
 · 75 pages
English
manualAtlona HDVS-200-TX-WP
AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
16
The AT-HDVS-200-TX-WP includes a built-in web GUI. Atlona recommends that the web GUI be used to set up the
AT-HDVS-200-TX-WP, as it provides intuitive management of all features.
The AT-HDVS-200-TX-WP is shipped with DHCP enabled. Once connected to a network, the DHCP server will
automatically assign an IP address to the unit. Use an IP scanner to determine the IP address of the AT-HDVS-200-
TX-WP. If a static IP address is desired, refer to IP Conguration (page 13). The default static IP address of the
AT-HDVS-200-TX-WP is 192.168.1.254.

Introduction to the Web GUI

1. Launch a web browser.
2. Use one of the following methods to access the IP address of the AT-HDVS-200-TX-WP:
a. Login to the web GUI of the receiver unit that is connected to the AT-HDVS-200-TX-WP. Once logged in,
click the link for the AT-HDVS-200-TX-WP, as shown:
b. Use an IP scanner to locate the IP address of the AT-HDVS-200-TX-WP on the network. The MAC address,
on the back of the unit, can be used to identify the unit with the IP address.
3. The Login page for the receiver will be displayed.

The Web GUI

NOTE: The web GUI can only be accessed if the AT-HDVS-200-TX-WP is connected to a compatible
PoE receiver unit, such as the AT-HDVS-200-RX, using the HDBaseT port. The receiver must be
connected to the network.

Manual

View the manual for the Atlona HDVS-200-TX-WP here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Atlona HDVS-200-TX-WP or do you need help? Ask your question here

Need help?

Do you have a question about the Atlona and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Atlona HDVS-200-TX-WP specifications

Below you will find the product specifications and the manual specifications of the Atlona HDVS-200-TX-WP.

General
BrandAtlona
ModelHDVS-200-TX-WP | AT-HDVS-200-TX-WP
ProductAV extender
EAN0846352004644
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution4096 x 2160 pixels
Maximum refresh rate60 Hz
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Supported graphics resolutions640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 768 (WXGA),1280 x 800 (WXGA),1360 x 768 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1200 (WUXGA),2048 x 1080,2048 x 1536 (QXGA),2560 x 1600 (WQXGA),2560 x 2048,3840 x 2160,4096 x 2160
Bandwidth10.2 Gbit/s
Audio output channels2.0 channels
HDCPYes
Color depth12 bit
CertificationCE, FCC
Cable types supportedCat5e, Cat6, Cat6a, Cat7
Maximum transfer distance100 m
Ports & interfaces
Connectivity technologyWired
VGA (D-Sub) input ports1
HDMI in1
3.5 mm (1/8-inch) inYes
Technical details
ColorYes
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)20 - 90 %
Weight & dimensions
Weight230 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Atlona HDVS-200-TX-WP below.

What is the weight of the Atlona HDVS-200-TX-WP?

The Atlona HDVS-200-TX-WP has a weight of 230 g.

What certifications does the Atlona HDVS-200-TX-WP have?

The Atlona HDVS-200-TX-WP has the following certifications: CE, FCC.

Is the manual of the Atlona HDVS-200-TX-WP available in English?

Yes, the manual of the Atlona HDVS-200-TX-WP is available in English .

Is your question not listed? Ask your question here

No results