Atlona HDVS-200-TX-WP manual

Atlona HDVS-200-TX-WP
6.9 · 1
PDF manual
 · 75 pages
English
manualAtlona HDVS-200-TX-WP
AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
14

Installation

3. Execute the IPStatic command. This command requires three arguments: the desired IP address of the
AT-HDVS-200-TX-WP, the subnet mask, and the gateway address. All arguments must be entered in dot-
decimal notation. The following is an example:
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
Setting DHCP mode
1. Connect to the AT-HDVS-200-TX-WP using RS-232 or Telnet.
2. At the command line, execute the IPDHCP command using the on argument, as shown. All characters are
case-sensitive.
IPDHCP on
Once DHCP is enabled, the unit will be assigned an IP address by the DHCP server (if present).

Using the Web GUI

The System page (page 31), in the web GUI, allows the AT-HDVS-200-TX-WP to use either DHCP or static IP
mode. In order to access the web GUI, the IP address of the AT-HDVS-200-TX-WP must be known.
1. Open the desired web browser and enter the IP address of the AT-HDVS-200-TX-WP.
2. Log in, using the required credentials. The factory-default username and password are listed below:
Username: root
Password: Atlona
3. Click the System tab.

Manual

View the manual for the Atlona HDVS-200-TX-WP here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Atlona HDVS-200-TX-WP or do you need help? Ask your question here

Need help?

Do you have a question about the Atlona and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Atlona HDVS-200-TX-WP specifications

Below you will find the product specifications and the manual specifications of the Atlona HDVS-200-TX-WP.

General
BrandAtlona
ModelHDVS-200-TX-WP | AT-HDVS-200-TX-WP
ProductAV extender
EAN0846352004644
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution4096 x 2160 pixels
Maximum refresh rate60 Hz
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Supported graphics resolutions640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 768 (WXGA),1280 x 800 (WXGA),1360 x 768 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1440 x 900 (WXGA+),1600 x 1200 (UXGA),1600 x 900,1680 x 1050 (WSXGA+),1920 x 1200 (WUXGA),2048 x 1080,2048 x 1536 (QXGA),2560 x 1600 (WQXGA),2560 x 2048,3840 x 2160,4096 x 2160
Bandwidth10.2 Gbit/s
Audio output channels2.0 channels
HDCPYes
Color depth12 bit
CertificationCE, FCC
Cable types supportedCat5e, Cat6, Cat6a, Cat7
Maximum transfer distance100 m
Ports & interfaces
Connectivity technologyWired
VGA (D-Sub) input ports1
HDMI in1
3.5 mm (1/8-inch) inYes
Technical details
ColorYes
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)20 - 90 %
Weight & dimensions
Weight230 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Atlona HDVS-200-TX-WP below.

What is the weight of the Atlona HDVS-200-TX-WP?

The Atlona HDVS-200-TX-WP has a weight of 230 g.

What certifications does the Atlona HDVS-200-TX-WP have?

The Atlona HDVS-200-TX-WP has the following certifications: CE, FCC.

Is the manual of the Atlona HDVS-200-TX-WP available in English?

Yes, the manual of the Atlona HDVS-200-TX-WP is available in English .

Is your question not listed? Ask your question here

No results