Atlas Sound DPA602 manual

Atlas Sound DPA602
(1)
  • Number of pages: 7
  • Filetype: PDF
1/7
AtlasIED.com
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005223 RevC 4/16
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

DPA602

Multi-Channel Network Amplifier

Features
Configurations
2 x 300 Watt 70V / 100V (Factory Default)
4 x 150 Watt @ 4Ω
1 x 300 Watt 70V / 100V & 2 x 150 Watt @ 4Ω
No Computer Required to Operate
Networkable
Configurable DSP Via GUI
PC Based DPA Site Manager Software With LAN IP Auto-
Discovery, Fault Reporting, Input & Output Status, Standby Status
and Amplifier Remote Activation Via A Scheduler Timer
On-Board Web Browser GUI for Remote Monitoring of Status &
Levels
User Page With Assignable Level Control, Post Contractor Settings,
Password Protection
Mute Assignments Triggered Via Audio Signal or Contact Closure
Audio Sense Auto Power Down (APD)
DSP Parameters per Output, Parametric EQ, Hi & Lo Cut Filters,
Delay, Limiter
Four (4) Balanced Inputs, Expandable to eight (8) via Accessory
Card
Optional Accessory Card Slot for a DPA-DAC4 4-channel Dante
receiver or a DPA-AMIX (2) Mic / Line, (2) AUX input card
PC, iOS
®
, & Android
®
Controllable
Assignable Level Controls, On Board GUI (Security Password
Protected) or by Front Panel Pots with Tamper Deterring Covers
Four (4) GPIO Control Ports Assignable in GUI for Mute or Remote
Level
Controllable From Third-Party Controllers
Applications
The flexible DSP, remote web monitoring, and control of the DPA
Series amplifiers makes them the perfect choice for presentation
rooms, classrooms, conference rooms, and retail background /
foreground music applications.
General Description
The AtlasIED DPA Series amplifiers feature a combination of flexibility,
performance, and control to provide high value features for applications
that require more than just great sound. The network enabled DPA series
amplifiers are DSP controlled 4-channel amplifiers that can be configured
in three different amplification arrangements to meet a wide range of
installation design requirements.
DPA amplifiers can be used right out of the box in their factory default
configuration as traditional 2-channel 70.7V/100V commercial power
amplifiers requiring no programming, special set-up, or network
connectivity. However, when web enabled, the DPA amplifiers can be
configured in 4-channel mode with either 4Ω or 8Ω load impedances
for two stereo zones. Many system designs require both low and
high impedance amplification. The DPA series can be configured for a
70.7V/100V paging/background system on one channel and the other
two channels can be used for 4Ω/8Ω foreground stereo applications.
The DPA comes standard with four balanced line inputs and an
accessory slot for an optional DPA-DAC4 4-channel Dante
receiver card
or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of 8 inputs.
All inputs can be mixed and routed to any of the four amplifier channels.
All amplifier channels have an assortment of DSP tools including level
controls, EQ’s, limiters, high & low pass filters, and delay to provide
flexibility for a range of applications.
The output level can be assigned to either the front panel
potentiometers or to the onboard GUI. Wired remote level control
can be configured to allow simple control for the end user. Each
unit also features GUI based input and output level metering along
with assignable mute functions that are triggered via an audio signal
or contact closure. Access to the DSP settings is accomplished via
computer, tablet, or mobile device using a web browser. All settings can
be password protected.
The DPA series amplifiers also include PC based site manager software
that automatically searches within a specific network for all DPA
amplifiers on the network. It will list them and allow a single click access
to any unit. The DPA Site Manager software can do a variety of functions
besides locating IP addresses such as; fault reporting, input & output
status, standby status and remote activation via a scheduler timer.
The flexibility of the DPA Series amplifiers and comprehensive
assortment of local or network control configurations make them an
ideal choice in today’s sophisticated commercial audio market.
DPA602 Front
DPA602 Back
Atlas Sound DPA602

Need help?

Number of questions: 0

Do you have a question about the Atlas Sound DPA602 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Atlas Sound DPA602 owners to properly answer your question.

View the manual for the Atlas Sound DPA602 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Atlas Sound DPA602 or do you need help? Ask your question here

Atlas Sound DPA602 specifications

General
Brand Atlas Sound
Model DPA602
Product Receiver
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Atlas Sound DPA602.

Is your question not listed? Ask your question here