ATen VE807 manual

ATen VE807
6 · 1
PDF manual
 · 29 pages
English
manualATen VE807
7

Chapter 2

Hardware Setup

Overview

For convenience and flexibility, the VE157 / VE607 / VE807 can be mounted
on the wall, ceiling, floor or any surface of your preference.
The dimensions of the VE157 / VE607 /
VE807 are made to fit an area equal to a
standard wall plate.
For a neat finish, use the Wall Plate Covers
that are included in the package contents.
The image on the right shows the VE157 /
VE607 / VE807 fitted to a wall plate with a
rectangular opening that fits the unit’s
dimensions (6.63 cm length x 3.28cm
width).
After mounting the VE157 / VE607 /
VE807, you can proceed to Hardware
Installation on page 12.
Note: This chapter uses theVE807 panels
for illustrating the installation steps.
1. Important safety information regarding the placement of this
device is provided on page 15. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
6.63 cm6.63 cm
3.28 cm3.28 cm
8.6 cm8.6 cm
8.6 cm8.6 cm

Manual

View the manual for the ATen VE807 here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the ATen VE807 or do you need help? Ask your question here

Need help?

Do you have a question about the ATen and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

ATen VE807 specifications

Below you will find the product specifications and the manual specifications of the ATen VE807.

General
BrandATen
ModelVE807 | VE807
ProductAV extender
LanguageEnglish
FiletypeUser manual (PDF)
Features
Supported video modes1080i, 1080p
Maximum resolution1920 x 1200 pixels
Maximum transfer distance60 m
TypeAV transmitter & receiver
Cable types supportedCat5e, Cat6
LED indicatorsYes
Audio systemstereo
Electrostatic Discharge (ESD) protection15 kV
Plug and PlayYes
3DYes
HDCPYes
Impedance100 Ω
Bandwidth6.75 Gbit/s
Bandwidth225 MHz
Product colorWhite
MaterialMetal
Ports & interfaces
HDMI in1
Number of HDMI outputs1
DC-in jackYes
Audio input1
Audio output1
Video in1
Video out1
RJ-45 input ports2
RJ-45 output ports2
Technical details
Sustainability certificatesRoHS
Power
External power adapterYes
Power consumption (transmitter) (max)2.9 W
Power consumption (receiver) (max)2.9 W
Operating voltage (receiver)9 V
Operating voltage (transmitter)9 V
Packaging content
AC adapter includedYes
ManualYes
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)0 - 80 %
Weight & dimensions
Receiver dimensions (WxDxH)68.6 x 49.8 x 26.9 mm
Transmitter dimensions (WxDxH)68.6 x 49.8 x 26.9 mm
Receiver weight180 g
Transmitter weight180 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ATen VE807 below.

Is the manual of the ATen VE807 available in English?

Yes, the manual of the ATen VE807 is available in English .

Is your question not listed? Ask your question here

No results