Atag WS9111MRL manual

Atag WS9111MRL
8 · 1
PDF manual
 · 84 pages
English
manualAtag WS9111MRL
WS9111MRL
Gebruiksaanwijzing
Afzuigkap
Notice d’utilisation
Hotte cheminée
Bedienungsanleitung
Dunstabzugshaube
Instructions for use
Cooker hood

Manual

View the manual for the Atag WS9111MRL here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Atag WS9111MRL or do you need help? Ask your question here

Need help?

Do you have a question about the Atag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Atag WS9111MRL specifications

Below you will find the product specifications and the manual specifications of the Atag WS9111MRL.

General
BrandAtag
ModelWS9111MRL | WS9111MRL
Productexhaust hood
EAN8715393169945
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Minimum distance from electric hob550 mm
Minimum distance from gas hob650 mm
Type of extractionDucted/Recirculating
Number of speeds3
Intensive speedYes
Fluid dynamic efficiency class-
Lighting efficiency class-
Grease filtering efficiency class-
Noise level- dB
Maximum extraction power- m³/h
Lighting
Number of bulbs2 bulb(s)
Bulb power2.5 W
Bulb typeLED
Design
Control typeButtons
Exhaust locationTop
Exhaust connection diameter125 mm
Product colorStainless steel
TypeWall-mounted
Power
Connected load255 W
Motor power250 W
Energy efficiency class-
Filtering
Grease filter typeCarbon
Removable filterYes
Washable filterYes
Weight & dimensions
Width900 mm
Depth530 mm
Height (max)1180 mm
Height (min)820 mm
Height820 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Atag WS9111MRL below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the height of the Atag WS9111MRL?

The Atag WS9111MRL has a height of 820 mm.

What is the width of the Atag WS9111MRL?

The Atag WS9111MRL has a width of 900 mm.

What is the depth of the Atag WS9111MRL?

The Atag WS9111MRL has a depth of 530 mm.

What energy label does the Atag WS9111MRL have?

The Atag WS9111MRL has energy label -.

Is the manual of the Atag WS9111MRL available in English?

Yes, the manual of the Atag WS9111MRL is available in English .

Is your question not listed? Ask your question here

No results