Asus VX238H manual

Asus VX238H
5.7 · 1
PDF manual
 · 25 pages
English
manualAsus VX238H

VX238 series

LCD Monitor

User Guide

Manual

View the manual for the Asus VX238H here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Asus VX238H or do you need help? Ask your question here

Need help?

Do you have a question about the Asus and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Asus VX238H specifications

Below you will find the product specifications and the manual specifications of the Asus VX238H.

General
BrandAsus
ModelVX238H | 90LMGB001R010O1C
Productmonitor
EAN0012304350477, 0663153714561, 0886227246168, 0886227246175, 4053162745018, 4716659246169
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Display
Display diagonal23 "
Response time1 ms
Display brightness (typical)250 cd/m²
Display resolution1920 x 1080 pixels
Contrast ratio (dynamic)80000000:1
Viewing angle, horizontal170 °
Viewing angle, vertical160 °
Display number of colors16.78 million colors
Pixel pitch0.2652 x 0.2652 mm
Aspect ratio16:9
Digital horizontal frequency30 - 80 kHz
Digital vertical frequency56 - 76 Hz
HD typeFull HD
3DNo
Supported graphics resolutions1920 x 1080 (HD 1080)
Native aspect ratio16:9
TouchscreenNo
Other features
DisplayLED
TV tuner integratedNo
Screen format adjustmentsAuto
Maximum resolution1920 x 1080 pixels
Volume controlDigital
Number of products included1 pc(s)
Placement supportedHorizontal
On/off switchYes
Ports & interfaces
HDCPYes
VGA (D-Sub) ports quantity1
DVI-D ports quantity0
DVI-I ports quantity0
HDMI ports quantity2
USB Type-A downstream ports quantity0
Headphone outputs1
Headphone connectivity3.5 mm
PC Audio inYes
AC (power) inYes
HDMIYes
Multimedia
Built-in speaker(s)Yes
Number of speakers2
RMS rated power3 W
Built-in cameraNo
Ergonomics
On Screen Display (OSD)Yes
VESA mounting-
Panel mounting interface- mm
Tilt angle range-5 - 20 °
Height adjustmentNo
Cable lock slotYes
Cable lock slot typeKensington
LED indicatorsPower
Thin Client
Thin client installedNo
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)34 W
Power consumption (off)0.5 W
Power consumption (PowerSave)0.5 W
Weight & dimensions
Width (without stand)- mm
Depth (without stand)- mm
Height (without stand)- mm
Weight (without stand)2600 g
Width (with stand)548.2 mm
Depth (with stand)210 mm
Height (with stand)402.7 mm
Weight (with stand)2600 g
Design
Product colorBlack
CertificationUL/cUL, CB, CE, ErP, FCC, CCC, BSMI, Gost-R, C-Tick, VCCI, CEL, RoHS, WEEE, Windows 7 WHQL
Market positioningGaming
Performance
Windows operating systems supportedYes
Packaging data
Package width600 mm
Package depth125 mm
Package height488 mm
Package weight4100 g
Sustainability
Sustainability certificatesENERGY STAR
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Asus VX238H below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What certifications does the Asus VX238H have?

The Asus VX238H has the following certifications: UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, Gost-R, C-Tick, VCCI, CEL, RoHS, WEEE, Windows 7 WHQL.

What is the screen size of the Asus VX238H?

The screen size of the Asus VX238H is 23 ".

What is the screen resolution of the display of the Asus VX238H?

The screen resolution of the Asus VX238H is 1920 x 1080 pixels.

Does the Asus VX238H have a fast response time?

Yes, the Asus VX238H has a response time of 1 ms. This is considered a very fast response time, making it ideal for gaming and fast-paced action scenes in movies, providing smooth and blur-free visuals.

How does the brightness of the Asus VX238H compare to other monitors?

The Asus VX238H has a display brightness of 250 cd/m². While this brightness level is decent, it may not be as bright as some high-end monitors on the market. However, it should still provide a vibrant and well-illuminated display for most users.

Is the Asus VX238H capable of displaying high-definition content?

Yes, the Asus VX238H can display Full HD content with a resolution of 1920 x 1080 pixels. This means users can enjoy clear and detailed imagery while watching movies, playing games, or working on high-resolution tasks.

Does the Asus VX238H support HDCP?

Yes, the Asus VX238H supports HDCP (High-bandwidth Digital Content Protection). This feature allows users to stream and view copyrighted content, such as Blu-ray movies, without any compatibility issues.

How many VGA ports does the Asus VX238H have?

The Asus VX238H has one VGA (D-Sub) port. While it may not have multiple VGA ports like some monitors, it still offers a convenient connection option for users who have devices that use VGA output.

How do I adjust the brightness and contrast settings on the Asus VX238H monitor?

To adjust the brightness and contrast settings on the Asus VX238H monitor, follow these steps: 1. Press the menu button on the monitor to open the menu. 2. Use the navigation buttons to scroll through the menu options and select "Splendid." 3. In the Splendid menu, select "Color." 4. Within the Color menu, you can adjust the brightness and contrast settings. - Use the navigation buttons to highlight the "Brightness" option and press the menu button to enter the adjustment mode. - Use the navigation buttons to increase or decrease the brightness level. - Press the menu button again to confirm the adjustment. - Repeat the same steps for the "Contrast" option to adjust the contrast level. 5. Once you have made the desired adjustments, press the menu button to exit the menu. By following these steps, you can easily adjust the brightness and contrast settings on your Asus VX238H monitor to suit your preferences.

Why is the power consumption of the Asus VX238H monitor higher than expected?

The power consumption of the Asus VX238H monitor may be higher than expected due to several factors. Here are some possible reasons: 1. Brightness and Contrast Settings: If the brightness and contrast settings are set too high, it can increase power consumption. Adjusting these settings to optimal levels can help reduce power usage. 2. Display Mode: Certain display modes, such as "Vivid" or "Dynamic," can consume more power compared to other modes. Switching to a more energy-efficient mode, like "Standard" or "sRGB," can help lower power consumption. 3. Screen Timeout: If the screen timeout is set to a longer duration, the monitor will consume more power when idle. Setting a shorter screen timeout can help conserve energy. 4. Ambient Light Sensor: The Asus VX238H monitor is equipped with an ambient light sensor that automatically adjusts the screen brightness based on the surrounding light conditions. If the ambient light sensor is disabled, the monitor may consume more power. Ensure that the ambient light sensor is enabled for optimal power management. 5. Power Saving Features: The monitor may have additional power-saving features, such as sleep mode or power-off timer. Enabling these features can help reduce power consumption when the monitor is not in use. By considering these factors and adjusting the settings accordingly, you can optimize the power consumption of your Asus VX238H monitor and potentially reduce energy usage.

What should I do if any of the accessories included with the Asus VX238H monitor are missing or damaged?

If any of the accessories included with the Asus VX238H monitor are missing or damaged, follow these steps: 1. Contact the place of purchase: Reach out to the store or online retailer where you purchased the monitor. Inform them about the missing or damaged accessories and provide them with the necessary details, such as the purchase date and any relevant receipts or order numbers. 2. Check the warranty: If the monitor is still under warranty, refer to the warranty information provided in the manual or on the manufacturer's website. Follow the instructions on how to request a replacement for the missing or damaged accessories. 3. Contact Asus support: If the place of purchase is unable to assist or if the monitor is no longer under warranty, contact Asus support directly. Provide them with the details of the missing or damaged accessories and inquire about the possibility of purchasing replacements. By following these steps, you can address the issue of missing or damaged accessories for your Asus VX238H monitor and seek the appropriate assistance from the place of purchase or Asus support.

How do I change the language settings on the Asus VX238H monitor?

To change the language settings on the Asus VX238H monitor, follow these steps: 1. Press the menu button on the monitor to open the menu. 2. Use the navigation buttons to scroll through the menu options and select "System Setup." 3. Within the System Setup menu, select "Language." 4. Use the navigation buttons to highlight the desired language option, such as English, French, German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified Chinese, or Japanese. 5. Press the menu button to confirm the language selection. 6. The monitor will now display the OSD (On-Screen Display) in the selected language. By following these steps, you can easily change the language settings on your Asus VX238H monitor to your preferred language.

What should I do if the panel of the Asus VX238H monitor is not displaying the correct resolution or colors?

If the panel of the Asus VX238H monitor is not displaying the correct resolution or colors, you can try the following steps to troubleshoot the issue: 1. Check the signal cable: Ensure that the signal cable (VGA or DVI) is securely connected to both the monitor and the computer. If the cable is loose or damaged, replace it with a new one. 2. Adjust the resolution settings: Right-click on the desktop and select "Display settings" (for Windows) or go to "System Preferences" and choose "Displays" (for Mac). Adjust the resolution to the recommended setting for the monitor (1920x1080). 3. Calibrate the colors: Use the monitor's OSD (On-Screen Display) menu to access the color settings. Navigate to the color options and adjust the brightness, contrast, and color temperature to achieve the desired display. 4. Update graphics drivers: Visit the manufacturer's website of your computer's graphics card and download the latest drivers. Install the drivers and restart the computer to ensure the changes take effect. 5. Reset monitor settings: If the issue persists, perform a factory reset on the monitor. Refer to the monitor's manual or OSD menu for instructions on how to reset the settings. By following these steps, you can troubleshoot and resolve issues related to incorrect resolution or colors on your Asus VX238H monitor.

Is the manual of the Asus VX238H available in English?

Yes, the manual of the Asus VX238H is available in English .

Is your question not listed? Ask your question here

No results