Argox AS-9600 manual

Argox AS-9600
5.3 · 1
PDF manual
 · 154 pages
English
manualArgox AS-9600

5 - 2

AS-9600 User Guide

you are programming. (See Primary/Alternate Data Formats on page
5-8 for further information.)
Step 3. Terminal Type
Refer to Terminal ID Table (page 5-4) and locate the Terminal ID
number for your PC. Scan three numeric bar codes on the inside back
cover to program the scanner for your terminal ID (you must enter 3
digits). For example, scan 0 0 3 for an AT wedge.
Note: The wildcard for all terminal types is 099.
Step 4. Code I.D.
In the Symbology Charts, beginning on page A-1, find the symbology to
which you want to apply the data format. Locate the Hex value for that
symbology and scan the 2 digit hex value from the Programming Chart
inside the back cover of this manual.
Note: If you are creating a data format for Batch Mode Quantity, use 35
for the Code I.D.
Step 5. Length
Specify what length (up to 9999 characters) of data will be acceptable
for this symbology. Scan the four digit data length from the
Programming Chart inside the back cover of this manual. For example
50 characters is entered as 0050.
Note:9999 is a universal number, indicating all lengths.
Step 6. Editor Commands
Refer to Data Format Editor Commands (page 5-4). Scan the symbols
that represent the command you want to enter.
Step 7. Scan Save to save your data format, or Discard to exit without saving
your changes.
Enter Data Format
Save
Discard

Manual

View the manual for the Argox AS-9600 here, for free. This manual comes under the category barcode reader and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Argox AS-9600 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Argox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argox AS-9600 specifications

Below you will find the product specifications and the manual specifications of the Argox AS-9600.

General
BrandArgox
ModelAS-9600 | AS-9600
Productbarcode readers
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Scanner type1D/2D
Sensor type-
Wavelength617 nm
Linear (1D) barcodes supportedCode 39, U.P.C.
Pitch reading angle-70 - 70 °
Tilt reading angle-60 - 60 °
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
TypeHandheld bar code reader
Motion tolerance (cm/s)10
Performance
LED indicatorsYes
BuzzerYes
Product colorBlack
Housing material-
International Protection (IP) codeIP40
CertificationCE, FCC, BSMI
Weight & dimensions
Weight120 g
Width66 mm
Depth170 mm
Height85 mm
Ports & interfaces
Connectivity technologyWired
Standard interfacesUSB, RS-232
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Power
Input voltage4 - 5.5 V
Power consumption400 mA
Power consumption (typical)2 W
Power consumption (standby)0.45 W
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argox AS-9600 below.

What is the weight of the Argox AS-9600?

The Argox AS-9600 has a weight of 120 g.

What certifications does the Argox AS-9600 have?

The Argox AS-9600 has the following certifications: CE, FCC, BSMI.

What is the height of the Argox AS-9600?

The Argox AS-9600 has a height of 85 mm.

What is the width of the Argox AS-9600?

The Argox AS-9600 has a width of 66 mm.

What is the depth of the Argox AS-9600?

The Argox AS-9600 has a depth of 170 mm.

Is the manual of the Argox AS-9600 available in English?

Yes, the manual of the Argox AS-9600 is available in English .

Is your question not listed? Ask your question here

No results