Argox AS-9600 manual

Argox AS-9600
5.3 · 1
PDF manual
 · 154 pages
English
manualArgox AS-9600

4 - 2

AS-9600 User Guide

symbology to which you want to apply the prefix or suffix. For
example, for Code 128, Code ID is “j” and Hex ID is “6A”.
Step 3. Scan the 2 hex digits from the Programming Chart inside the back
cover of this manual or scan 9, 9 for all symbologies.
Step 4. Determine the hex value from the ASCII Conversion Chart (Code
Page 1252), beginning on page A-4, for the prefix or suffix you wish
to enter.
Step 5. Scan the 2 digit hex value from the Programming Chart inside the
back cover of this manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.
Step 7. To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
Note: To add a backslash (\) as in Step 7, you must scan 5C twice once
to create the leading backslash and then to create the backslash
itself.
Step 8. Scan Save to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.

Example: Add a Suffix to a specific symbology

To send a CR (carriage return)Suffix for U.P.C. only:
Step 1. Scan Add Suffix.
Step 2. Determine the 2 digit hex value from the Symbology Chart
(included in the Symbology Charts, beginning on page A-1) for
U.P.C..
Step 3. Scan 6, 3 from the Programming Chart inside the back cover of this
manual.
Step 4. Determine the hex value from the ASCII Conversion Chart (Code
Page 1252), beginning on page A-4, for the CR (carriage return).
Step 5. Scan 0, D from the Programming Chart inside the back cover of this
manual.
Step 6. Scan Save, or scan Discard to exit without saving.

To Clear One or All Prefixes or Suffixes

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. If you have been entering prefixes and suffixes for single sym-
bologies, you can use Clear One Prefix (Suffix) to delete a specific char-
acter from a symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.

Manual

View the manual for the Argox AS-9600 here, for free. This manual comes under the category barcode reader and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Argox AS-9600 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Argox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argox AS-9600 specifications

Below you will find the product specifications and the manual specifications of the Argox AS-9600.

General
BrandArgox
ModelAS-9600 | AS-9600
Productbarcode readers
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Scanner type1D/2D
Sensor type-
Wavelength617 nm
Linear (1D) barcodes supportedCode 39, U.P.C.
Pitch reading angle-70 - 70 °
Tilt reading angle-60 - 60 °
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
TypeHandheld bar code reader
Motion tolerance (cm/s)10
Performance
LED indicatorsYes
BuzzerYes
Product colorBlack
Housing material-
International Protection (IP) codeIP40
CertificationCE, FCC, BSMI
Weight & dimensions
Weight120 g
Width66 mm
Depth170 mm
Height85 mm
Ports & interfaces
Connectivity technologyWired
Standard interfacesUSB, RS-232
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Power
Input voltage4 - 5.5 V
Power consumption400 mA
Power consumption (typical)2 W
Power consumption (standby)0.45 W
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argox AS-9600 below.

What is the weight of the Argox AS-9600?

The Argox AS-9600 has a weight of 120 g.

What certifications does the Argox AS-9600 have?

The Argox AS-9600 has the following certifications: CE, FCC, BSMI.

What is the height of the Argox AS-9600?

The Argox AS-9600 has a height of 85 mm.

What is the width of the Argox AS-9600?

The Argox AS-9600 has a width of 66 mm.

What is the depth of the Argox AS-9600?

The Argox AS-9600 has a depth of 170 mm.

Is the manual of the Argox AS-9600 available in English?

Yes, the manual of the Argox AS-9600 is available in English .

Is your question not listed? Ask your question here

No results