Argox AS-9600 manual

Argox AS-9600
5.3 · 1
PDF manual
 · 154 pages
English
manualArgox AS-9600

3 - 4

AS-9600 User Guide

LED Good Read

The LED indicator can be programmed On or Off in response to a good
read. Default = On.
* LED - Good Read On
Number of Beeps Good Read
LED - Good Read Off
The number of beeps of a good read can be programmed from 1 - 9. The
same number of beeps will be applied to the beeper and LED in response
to a good read. For example, if you program this option to have five beeps,
there will be five beeps and five LED flashes in response to a good read.
The beeps and LED flashes are in sync with one another. To change the
number of beeps, scan the bar code below and then scan a digit (1-9) bar
code and the Save bar code on the Programming Chart inside the back
cover of this manual. Default = 1.
Number of Good Read Beeps/LED Flashes
Number of Beeps Error
The number of beeps and LED flashes emitted by the scanner for a bad
read or error can be programmed from 1 - 9. For example, if you program
this option to have five error beeps, there will be five error beeps and five
LED flashes in response to an error. To change the number of error beeps,
scan the bar code below and then scan a digit (1-9) bar code and the Save
bar code on the Programming Chart inside the back cover of this manual.
Default = 1.
Number of Error Beeps/LED Flashes

Manual

View the manual for the Argox AS-9600 here, for free. This manual comes under the category barcode reader and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Argox AS-9600 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Argox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argox AS-9600 specifications

Below you will find the product specifications and the manual specifications of the Argox AS-9600.

General
BrandArgox
ModelAS-9600 | AS-9600
Productbarcode readers
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Scanner type1D/2D
Sensor type-
Wavelength617 nm
Linear (1D) barcodes supportedCode 39, U.P.C.
Pitch reading angle-70 - 70 °
Tilt reading angle-60 - 60 °
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
TypeHandheld bar code reader
Motion tolerance (cm/s)10
Performance
LED indicatorsYes
BuzzerYes
Product colorBlack
Housing material-
International Protection (IP) codeIP40
CertificationCE, FCC, BSMI
Weight & dimensions
Weight120 g
Width66 mm
Depth170 mm
Height85 mm
Ports & interfaces
Connectivity technologyWired
Standard interfacesUSB, RS-232
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Power
Input voltage4 - 5.5 V
Power consumption400 mA
Power consumption (typical)2 W
Power consumption (standby)0.45 W
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argox AS-9600 below.

What is the weight of the Argox AS-9600?

The Argox AS-9600 has a weight of 120 g.

What certifications does the Argox AS-9600 have?

The Argox AS-9600 has the following certifications: CE, FCC, BSMI.

What is the height of the Argox AS-9600?

The Argox AS-9600 has a height of 85 mm.

What is the width of the Argox AS-9600?

The Argox AS-9600 has a width of 66 mm.

What is the depth of the Argox AS-9600?

The Argox AS-9600 has a depth of 170 mm.

Is the manual of the Argox AS-9600 available in English?

Yes, the manual of the Argox AS-9600 is available in English .

Is your question not listed? Ask your question here

No results