Argox AS-9600 manual

Argox AS-9600
5.3 · 1
PDF manual
 · 154 pages
English
manualArgox AS-9600

10 - 3

AS-9600 User Guide

You need to program a suffix. Programming a suffix enables the scanner
to output the bar code data plus the key you need (such as “CR”) to enter
the data into your application. Refer to Prefix/Suffix Overview beginning
on page 4-1 for further information.
Does the scanner read the bar code incorrectly?
If the scanner reads a bar code, but the data is not displayed correctly on
the host screen:
The scanner may not be programmed for the appropriate terminal
interface.
For example, you scan “12345” and the host displays “@es%.”
Reprogram the scanner with the correct Plug and Play bar code. See
Programming the Interface beginning on page 2-1.
The scanner may not be programmed to output your bar code data
properly.
For example, you scan “12345” and the host displays “A12345B.”
Reprogram the scanner with the proper symbology selections. See
Chapter 6.
The scanner won’t read your bar code at all.
Scan the sample bar codes in the back of this manual. If the scanner
reads the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see Chapter 6).
If the scanner still can’t read the sample bar codes, scan All Symbologies
(page 6-2).
If you arent sure what programming options have been set in the scanner,
or if you want the factory default settings restored, refer to Resetting the
Custom Defaults on page 1-5.

Manual

View the manual for the Argox AS-9600 here, for free. This manual comes under the category barcode reader and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Argox AS-9600 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Argox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argox AS-9600 specifications

Below you will find the product specifications and the manual specifications of the Argox AS-9600.

General
BrandArgox
ModelAS-9600 | AS-9600
Productbarcode readers
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Scanner type1D/2D
Sensor type-
Wavelength617 nm
Linear (1D) barcodes supportedCode 39, U.P.C.
Pitch reading angle-70 - 70 °
Tilt reading angle-60 - 60 °
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
TypeHandheld bar code reader
Motion tolerance (cm/s)10
Performance
LED indicatorsYes
BuzzerYes
Product colorBlack
Housing material-
International Protection (IP) codeIP40
CertificationCE, FCC, BSMI
Weight & dimensions
Weight120 g
Width66 mm
Depth170 mm
Height85 mm
Ports & interfaces
Connectivity technologyWired
Standard interfacesUSB, RS-232
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Power
Input voltage4 - 5.5 V
Power consumption400 mA
Power consumption (typical)2 W
Power consumption (standby)0.45 W
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argox AS-9600 below.

What is the weight of the Argox AS-9600?

The Argox AS-9600 has a weight of 120 g.

What certifications does the Argox AS-9600 have?

The Argox AS-9600 has the following certifications: CE, FCC, BSMI.

What is the height of the Argox AS-9600?

The Argox AS-9600 has a height of 85 mm.

What is the width of the Argox AS-9600?

The Argox AS-9600 has a width of 66 mm.

What is the depth of the Argox AS-9600?

The Argox AS-9600 has a depth of 170 mm.

Is the manual of the Argox AS-9600 available in English?

Yes, the manual of the Argox AS-9600 is available in English .

Is your question not listed? Ask your question here

No results