Argox AS-9600 manual

Argox AS-9600
5.3 · 1
PDF manual
 · 154 pages
English
manualArgox AS-9600
8 - 3
AS-9600 User Guide
Scan Data
Scan Data allows you to scan bar codes and display the bar code data
in a window. Scan Data lets you send serial commands to the scanner
and receive scanner response that can be seen in the Scan Data win-
dow. The data displayed in the Scan Data window can either be saved
in a file or printed.
Configure
1. Configure displays the programming and configuration data of the
scanner. The scanner's programming and configuration data is grouped
into different categories. Each category is displayed as a tree item
under the "Configure" tree node in the application explorer. When one
of these tree nodes is clicked, the right-hand side is loaded with the
parameters' form belonging to that particular category. The "Configure"
tree option has all the programming and configuration parameters
specified for a scanner. You can set or modify these parameters as
required. You can later write the modified settings to the scanner, or
save them to a dcf file.

Resetting the Factory Defaults

This selection erases all your settings and resets the scanner to the
!
original factory defaults. It also disables all plugins.
If you aren’t sure what programming options are in your scanner, or you’ve
changed some options and want to restore the scanner to factory default set-
tings, first scan the Remove Custom Defaults bar code, then scan Activate
Defaults. This resets the scanner to the factory default settings.
Remove Custom Defaults
Activate Defaults

Manual

View the manual for the Argox AS-9600 here, for free. This manual comes under the category barcode reader and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Argox AS-9600 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Argox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argox AS-9600 specifications

Below you will find the product specifications and the manual specifications of the Argox AS-9600.

General
BrandArgox
ModelAS-9600 | AS-9600
Productbarcode readers
LanguageEnglish
FiletypeUser manual (PDF)
Scanning
Scanner type1D/2D
Sensor type-
Wavelength617 nm
Linear (1D) barcodes supportedCode 39, U.P.C.
Pitch reading angle-70 - 70 °
Tilt reading angle-60 - 60 °
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
TypeHandheld bar code reader
Motion tolerance (cm/s)10
Performance
LED indicatorsYes
BuzzerYes
Product colorBlack
Housing material-
International Protection (IP) codeIP40
CertificationCE, FCC, BSMI
Weight & dimensions
Weight120 g
Width66 mm
Depth170 mm
Height85 mm
Ports & interfaces
Connectivity technologyWired
Standard interfacesUSB, RS-232
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-40 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Power
Input voltage4 - 5.5 V
Power consumption400 mA
Power consumption (typical)2 W
Power consumption (standby)0.45 W
Power source type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argox AS-9600 below.

What is the weight of the Argox AS-9600?

The Argox AS-9600 has a weight of 120 g.

What certifications does the Argox AS-9600 have?

The Argox AS-9600 has the following certifications: CE, FCC, BSMI.

What is the height of the Argox AS-9600?

The Argox AS-9600 has a height of 85 mm.

What is the width of the Argox AS-9600?

The Argox AS-9600 has a width of 66 mm.

What is the depth of the Argox AS-9600?

The Argox AS-9600 has a depth of 170 mm.

Is the manual of the Argox AS-9600 available in English?

Yes, the manual of the Argox AS-9600 is available in English .

Is your question not listed? Ask your question here

No results