Argoclima Willis manual

Argoclima Willis
7.1 · 1
PDF manual
 · 12 pages
English
manualArgoclima Willis
V 07/22
EN

WILLIS

WALL-MOUNTED CERAMIC FAN HEATER

This product is only suitable for well
insulated spaces or occasional use.

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the panel or carrying out maintenance operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages.
Store these instructions.
IP22

Manual

View the manual for the Argoclima Willis here, for free. This manual comes under the category heaters and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Argoclima Willis or do you need help? Ask your question here

Need help?

Do you have a question about the Argoclima and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Argoclima Willis specifications

Below you will find the product specifications and the manual specifications of the Argoclima Willis.

General
BrandArgoclima
ModelWillis | 191070216
Productheater
EAN8013557519224
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Sustainability certificatesCE
Features
International Protection (IP) codeIP22
TypeFan electric space heater
Heating element typeCeramic
Number of power levels3
Delayed start timerYes
Remotely operatedYes
Summer ventilationYes
On/off switchYes
Timer duration (maximum)9 h
Overheat protectionYes
Design
Suitable forIndoor
Suitable for bathroomYes
Placement optionsWall
Product colorBlack, White
Built-in displayYes
DisplayLED
Control typeTouch
Packaging content
Quantity per pack1 pc(s)
Handheld remote controlYes
ManualYes
Performance
Adjustable thermostatYes
Thermostat control typeDigital
Temperature (min)5 °C
Temperature (max)35 °C
Heating power2000 W
Heating power (min)1200 W
Suitable for room volume up to60 m³
Power
AC input voltage230 V
AC input frequency50 - 60 Hz
Weight & dimensions
Width450 mm
Depth100 mm
Height195 mm
Weight2000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Argoclima Willis below.

What is the weight of the Argoclima Willis?

The Argoclima Willis has a weight of 2000 g.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

What is the height of the Argoclima Willis?

The Argoclima Willis has a height of 195 mm.

What is the width of the Argoclima Willis?

The Argoclima Willis has a width of 450 mm.

What is the depth of the Argoclima Willis?

The Argoclima Willis has a depth of 100 mm.

Does Argoclima Willis have a sustainability certificate?

Yes, Argoclima Willis has a CE sustainability certificate. This means that it meets the safety and quality standards required in the European Economic Area.

What is the International Protection (IP) code of Argoclima Willis?

Argoclima Willis has an IP22 code. This means that it is protected against solid objects larger than 12.5mm and has protection against dripping water when tilted up to 15 degrees.

Can Argoclima Willis be used in bathrooms?

Yes, Argoclima Willis is suitable for use in bathrooms. This indicates that it has the necessary safety features to handle the unique conditions of a bathroom environment.

Can Argoclima Willis be placed on the wall?

Yes, Argoclima Willis can be wall-mounted. This provides flexibility in placement options and helps to save space in the room.

Does Argoclima Willis have a built-in LED display and remote control?

Yes, Argoclima Willis has a built-in LED display and comes with a remote control. This allows for convenient operation and easy monitoring of the heater's settings.

How do I turn on and off the Argoclima Willis heater?

To turn on and off the Argoclima Willis heater, follow these steps: 1. To turn on the heater, touch the power button on the control panel or the corresponding button on the remote control. The LED on the control panel will light up, indicating that the heater is on. 2. To turn off the heater, touch the power button again on the control panel or the corresponding button on the remote control. The LED on the control panel will turn off, indicating that the heater is off. Please note that the factory default settings for the heater include the heating mode, set temperature, open window function, and timer. You can adjust these settings according to your preferences using the buttons on the control panel or the remote control. If you encounter any issues or have further questions about turning on and off the Argoclima Willis heater, please refer to the manual for more detailed instructions.

What should I do if the panel of the Argoclima Willis heater is not responding?

If the panel of the Argoclima Willis heater is not responding, you can try the following steps: 1. Check the power supply: Ensure that the heater is properly connected to a power outlet and that the outlet is functioning correctly. You can try plugging in another device to verify if the outlet is working. 2. Reset the heater: Locate the power button on the control panel or the remote control and press and hold it for a few seconds. This will reset the heater and may resolve any temporary issues with the panel. 3. Replace the batteries: If you are using the remote control to operate the heater, check the battery level. Open the battery door on the back of the remote control and replace the battery with a new one if necessary. Ensure that the battery is inserted correctly, following the polarity markings. 4. Contact customer support: If the panel still does not respond after trying the above steps, it is recommended to contact Argoclima customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if needed. Please note that these steps are general recommendations and may vary depending on the specific model of the Argoclima Willis heater.

How can I adjust the heat output of the Argoclima Willis heater?

To adjust the heat output of the Argoclima Willis heater, follow these steps: 1. Turn on the heater by pressing the power button on the control panel or the corresponding button on the remote control. The LED on the control panel will light up. 2. Select the desired heating mode by pressing the mode button. The available options are COMFORT mode, ECO mode, and Anti-Frost mode. Use the temperature buttons to set the desired temperature within the range specified for each mode. 3. In COMFORT mode, you can set the temperature from 10 °C to 35 °C. In ECO mode, the temperature range is from 6 °C to 31 °C. Please note that in Anti-Frost mode, the temperature is fixed at 7 °C and cannot be adjusted. 4. If you want to use the pre-selection programs for heating (P1/P2/P3), refer to the manual for specific instructions on how to set and modify these programs. 5. Once you have selected the desired heating mode and temperature, the heater will adjust its heat output accordingly. Please note that the specific steps may vary slightly depending on the model of the Argoclima Willis heater.

What should I do if the Argoclima Willis heater is consuming too much auxiliary electricity?

If the Argoclima Willis heater is consuming too much auxiliary electricity, you can try the following steps to reduce its consumption: 1. Check the fan-assisted heat output: If your heater has a fan-assisted heat output, make sure it is turned off when not needed. The fan can consume additional electricity, so using the heater without the fan can help reduce auxiliary electricity consumption. 2. Adjust the heat output: Lowering the heat output of the heater can also help reduce auxiliary electricity consumption. Refer to the manual for instructions on how to adjust the heat output. You may have options such as selecting a lower power level or using a different heating mode that consumes less electricity. 3. Utilize the standby mode: If your heater has a standby mode, consider using it when the heater is not in use for an extended period. The standby mode consumes less electricity compared to the active heating mode. 4. Optimize the timer settings: Take advantage of the timer function to schedule the heater to turn on and off at specific times. This can help ensure that the heater operates only when needed, reducing unnecessary electricity consumption. 5. Contact customer support: If you have tried the above steps and the auxiliary electricity consumption is still high, it is recommended to contact Argoclima customer support for further assistance. They can provide specific troubleshooting advice or arrange for a technician to inspect the heater. Please note that these steps are general recommendations and may vary depending on the specific model of the Argoclima Willis heater.

How can I improve the seasonal energy efficiency of space heating for the Argoclima Willis heater?

To improve the seasonal energy efficiency of space heating for the Argoclima Willis heater, you can follow these steps: 1. Set the temperature wisely: Adjust the temperature of the heater to a comfortable level, but avoid setting it too high. Lowering the temperature by just a few degrees can significantly reduce energy consumption. 2. Use the thermostat: Take advantage of the integrated thermostat feature of the heater. This allows the heater to automatically regulate the heat output based on the desired temperature, preventing unnecessary energy usage. 3. Utilize the room temperature control: If your heater has room temperature control, make sure to enable it. This feature adjusts the heat output based on the current room temperature, ensuring efficient heating without overheating the space. 4. Take advantage of timer settings: Use the timer function to schedule the heater to turn on and off at specific times. This helps to avoid heating an empty room and saves energy. 5. Ensure proper insulation: Make sure that the room or space where the heater is used is well-insulated. Proper insulation helps to retain heat and reduces the need for continuous heating. By following these steps, you can optimize the energy efficiency of the Argoclima Willis heater and reduce auxiliary electricity consumption.

Is the manual of the Argoclima Willis available in English?

Yes, the manual of the Argoclima Willis is available in English .

Is your question not listed? Ask your question here

No results