Apple Watch v1.0 manual

Apple Watch v1.0
6.4 · 1
PDF manual
 · 96 pages
English
manualApple Watch v1.0
Chapter 22 Safety, Handling, and Support 92
FCC compliance statement for Apple Watch, Apple Watch Magnetic

Charging Cable, and Apple Watch Magnetic Charging Case

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modications to this product not authorized by Apple could void
the electromagnetic compatibility (EMC) and wireless compliance and negate your authority
to operate the product. This product has demonstrated EMC compliance under conditions
that included the use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and shielded cables
between system components to reduce the possibility of causing interference to radios,
televisions, and other electronic devices.
Canadian regulatory statement for Apple Watch, Apple Watch

Magnetic Charging Cable, and Apple Watch Magnetic Charging Case

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)

View the manual for the Apple Watch v1.0 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Apple Watch v1.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Apple and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Apple Watch Series 1 features a rectangular aluminium watch case with a fluoroelastomer band that can be easily removed. It offers protection against splashes, making it a splash-proof device. The digital display has a resolution of 312 x 390 pixels and is equipped with a responsive touchscreen for easy navigation. Additionally, the Apple Watch Series 1 comes with a built-in microphone for voice commands and calls. Designed to track and share your activity, measure workouts, and monitor your health, the Apple Watch Series 1 boasts lightning-fast performance thanks to its new dual-core processor. This smartwatch allows you to stay connected to the people and information that matter most to you, all while keeping you active and healthy. The Apple Watch Series 1 gives you the ability to track your daily activity through Stand, Move, and Exercise rings, encouraging you to stay active throughout the day. It also lets you measure various workouts and monitor your health by keeping track of your heart rate, managing stress levels, and adding relevant health apps. Whether you're looking to stay active, track your progress, or simply stay connected, the Apple Watch Series 1 is a versatile smartwatch that caters to all your needs.

General
BrandApple
ModelWatch v1.0 | MP032CN/A
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)
Design
Watch case colorGray
Watch case materialAluminum
Band colorBlack
Band materialFluoroelastomer
Band size-
Wrist size range140 - 210 mm
ShapeRectangular
Removable strapYes
Protection featuresSplash proof
Watch case size42 mm
Market positioningSmartwatch
Display
Watch glass typeIon-X glass
Display typeDigital
Display resolution312 x 390 pixels
TouchscreenYes
Display diagonal- "
Display brightness450 cd/m²
Display technologyOLED
Performance
Built-in microphoneYes
Compatible memory cardsNot supported
Mobile operating systems supportediOS 10
Operating system installedwatchOS 3
Built-in speaker(s)Yes
Processor manufacturerApple
Processor modelS1P
Processor cores2
Languages support-
FM radioNo
Built-in cameraNo
Ports & interfaces
Bluetooth version4.0
BluetoothYes
USB portNo
Headphone connectivity-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-FiYes
Power
Battery technologyLithium-Ion (Li-Ion)
Battery capacity- mAh
Battery life (max)18 h
Auto standby-
Rechargeable batteryYes
Features
Social network services supported-
Personal info management (PIM)Calendar, Events reminder
AccelerometerYes
Ambient light sensorYes
GyroscopeYes
Heart rate monitorYes
Vibrating motorYes
Weight & dimensions
Width36.4 mm
Depth42.5 mm
Thickness10.5 mm
Weight30 g
Packaging content
AC adapter includedYes
Charging baseYes
Operational conditions
Operating temperature (T-T)0 - 35 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Apple Watch v1.0 below.

What is the weight of the Apple Watch v1.0?

The Apple Watch v1.0 has a weight of 30 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Apple Watch v1.0?

The screen size of the Apple Watch v1.0 is - ".

What is the screen resolution of the display of the Apple Watch v1.0?

The screen resolution of the Apple Watch v1.0 is 312 x 390 pixels.

What is the width of the Apple Watch v1.0?

The Apple Watch v1.0 has a width of 36.4 mm.

What is the depth of the Apple Watch v1.0?

The Apple Watch v1.0 has a depth of 42.5 mm.

Is the manual of the Apple Watch v1.0 available in English?

Yes, the manual of the Apple Watch v1.0 is available in English .

Is your question not listed? Ask your question here

No results