Apple Watch v1.0 manual

Apple Watch v1.0
6.4 · 1
PDF manual
 · 96 pages
English
manualApple Watch v1.0
Chapter 22 Safety, Handling, and Support 90
Wi-Fi and Bluetooth addresses
SEID
Legal Info
To view regulatory marks, open Settings , then go to General > Regulatory.
You can also view this information on the paired iPhone—open the Apple Watch app on iPhone,
tap My Watch, then go to General > About. Scroll to the bottom and tap Legal to view Legal
Notices, License, information on where to nd the Warranty, and RF Exposure information.

Restore Apple Watch

If Apple Watch is disabled because you forgot your passcode or entered an incorrect passcode
too many times, you can use the Apple Watch app on iPhone to allow you to enter the passcode
again. If you still can’t remember your passcode, you can restore Apple Watch and reset the
passcode. Restoring erases the content and settings on Apple Watch, but uses a backup to
replace your data and settings. For more information, see Update Apple Watch software, below.
Important: If Erase Data is turned on, the data on your Apple Watch is erased after 10 failed
passcode attempts.

Update Apple Watch software

You can update your Apple Watch software by checking for updates in the Apple Watch app
on iPhone.
Check for software updates. Open the Apple Watch app on iPhone, tap My Watch, then
go to General > Software Update. Download the software to the iPhone, then continue on
Apple Watch.
Update wirelessly on Apple Watch. Follow the prompts on Apple Watch to install the software
update (or restore your software, if necessary).

Restore Apple Watch from a backup

Apple Watch content backs up automatically to your paired iPhone, and you can restore it from
a stored backup. Apple Watch backups are included as part of your iPhone backups to iCloud or
iTunes, but you can’t view information in the backups in iCloud.
Backing up and restoring Apple Watch. When paired with an iPhone, Apple Watch content is
backed up continuously to iPhone. If you unpair the devices, a backup is performed rst. If you
repair Apple Watch or get a new one, you can choose Restore from Backup and select a stored
backup on your iPhone.

Sell, give away, or lose Apple Watch

Before you sell or give away your Apple Watch, be sure to unpair it from your iPhone and
erase its contents. If your iPhone and Apple Watch are fully functional and connected, you can
accomplish this just by unpairing the watch. If your Apple Watch is lost or stolen, you can remove
any credit or debit cards associated with it.
Unpair Apple Watch and iPhone. Open the Apple Watch app on iPhone, tap My Watch, tap
Apple Watch, tap Unpair Apple Watch, then tap Unpair [watch name]. The Apple Watch is also
removed from your iCloud account.

View the manual for the Apple Watch v1.0 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Apple Watch v1.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Apple and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Apple Watch Series 1 features a rectangular aluminium watch case with a fluoroelastomer band that can be easily removed. It offers protection against splashes, making it a splash-proof device. The digital display has a resolution of 312 x 390 pixels and is equipped with a responsive touchscreen for easy navigation. Additionally, the Apple Watch Series 1 comes with a built-in microphone for voice commands and calls. Designed to track and share your activity, measure workouts, and monitor your health, the Apple Watch Series 1 boasts lightning-fast performance thanks to its new dual-core processor. This smartwatch allows you to stay connected to the people and information that matter most to you, all while keeping you active and healthy. The Apple Watch Series 1 gives you the ability to track your daily activity through Stand, Move, and Exercise rings, encouraging you to stay active throughout the day. It also lets you measure various workouts and monitor your health by keeping track of your heart rate, managing stress levels, and adding relevant health apps. Whether you're looking to stay active, track your progress, or simply stay connected, the Apple Watch Series 1 is a versatile smartwatch that caters to all your needs.

General
BrandApple
ModelWatch v1.0 | MP032CN/A
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)
Design
Watch case colorGray
Watch case materialAluminum
Band colorBlack
Band materialFluoroelastomer
Band size-
Wrist size range140 - 210 mm
ShapeRectangular
Removable strapYes
Protection featuresSplash proof
Watch case size42 mm
Market positioningSmartwatch
Display
Watch glass typeIon-X glass
Display typeDigital
Display resolution312 x 390 pixels
TouchscreenYes
Display diagonal- "
Display brightness450 cd/m²
Display technologyOLED
Performance
Built-in microphoneYes
Compatible memory cardsNot supported
Mobile operating systems supportediOS 10
Operating system installedwatchOS 3
Built-in speaker(s)Yes
Processor manufacturerApple
Processor modelS1P
Processor cores2
Languages support-
FM radioNo
Built-in cameraNo
Ports & interfaces
Bluetooth version4.0
BluetoothYes
USB portNo
Headphone connectivity-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-FiYes
Power
Battery technologyLithium-Ion (Li-Ion)
Battery capacity- mAh
Battery life (max)18 h
Auto standby-
Rechargeable batteryYes
Features
Social network services supported-
Personal info management (PIM)Calendar, Events reminder
AccelerometerYes
Ambient light sensorYes
GyroscopeYes
Heart rate monitorYes
Vibrating motorYes
Weight & dimensions
Width36.4 mm
Depth42.5 mm
Thickness10.5 mm
Weight30 g
Packaging content
AC adapter includedYes
Charging baseYes
Operational conditions
Operating temperature (T-T)0 - 35 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Apple Watch v1.0 below.

What is the weight of the Apple Watch v1.0?

The Apple Watch v1.0 has a weight of 30 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Apple Watch v1.0?

The screen size of the Apple Watch v1.0 is - ".

What is the screen resolution of the display of the Apple Watch v1.0?

The screen resolution of the Apple Watch v1.0 is 312 x 390 pixels.

What is the width of the Apple Watch v1.0?

The Apple Watch v1.0 has a width of 36.4 mm.

What is the depth of the Apple Watch v1.0?

The Apple Watch v1.0 has a depth of 42.5 mm.

Is the manual of the Apple Watch v1.0 available in English?

Yes, the manual of the Apple Watch v1.0 is available in English .

Is your question not listed? Ask your question here

No results