Apple Watch v1.0 manual

Apple Watch v1.0
6.4 · 1
PDF manual
 · 96 pages
English
manualApple Watch v1.0
Chapter 21 Accessibility and Related Settings 79
Zoom
Use Zoom to magnify what’s on the Apple Watch display.
Turn on Zoom. On Apple Watch, open the Settings app , then turn on General > Accessibility >
Zoom. You can also use iPhone to turn on Zoom for Apple Watch—open the Apple Watch app
on iPhone, tap My Watch, tap Settings, then tap the option in General > Accessibility. Or, use the
Accessibility Shortcut; see The Accessibility Shortcut on page 76.
Zoom in or out. Double-tap the Apple Watch display with two ngers.
Move around (pan). Drag the display with two ngers. You can also turn the Digital Crown to
pan over the entire page, left-right and up-down. The small Zoom button that appears shows
you where you are on the page.
Use the Digital Crown normally instead of panning. Tap the display once with two ngers to
switch between using the Digital Crown to pan and using the Digital Crown the way it works
without Zoom on (for example, to scroll a list or zoom a map).
Adjust magnication. Double-tap and hold with two ngers, then drag the ngers up or down
on the display. To limit magnication, open the Apple Watch app on iPhone, tap My Watch, go to
General > Accessibility > Zoom, then drag the Maximum Zoom Level slider.
Zoom during setup. Triple-tap with two ngers while setting up Apple Watch to get a
better look.

On/O Button Labels

Turn on button labels to see an additional position indicator. With labels on, you see a one (1) on
any option that is on, and a zero (0) on options that are turned o.
Add labels to On/O buttons. On Apple Watch, open the Settings app , then turn on
General > Accessibility > On/O Labels. You can also use iPhone to turn on labels for
Apple Watch—open the Apple Watch app on iPhone, tap My Watch, go to General > Accessibility,
then turn on On/O Labels.

Mono Audio and Audio Balance

If you prefer to hear a combined left+right audio signal out of both audio channels on speakers
or headphones connected to Apple Watch, turn on Mono Audio. You can also adjust the left-right
balance of Apple Watch audio, whether stereo or mono.
Switch to mono audio. Open the Apple Watch app on iPhone, tap My Watch, go to General >
Accessibility, then turn on Mono Audio.
Adjust the balance. Drag the slider below the Mono Audio setting.

Bold Text

You can make text on Apple Watch easier to read by displaying it as boldface type.
Have Apple Watch use bold text. On Apple Watch, open the Settings app , go to General >
Accessibility, then turn on Bold Text. You’ll need to restart Apple Watch for the change to take
eect. You can also use iPhone to turn on Bold Text for Apple Watch—open the Apple Watch app
on iPhone, tap My Watch, go to General > Accessibility, then turn on Bold Text.

View the manual for the Apple Watch v1.0 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Apple Watch v1.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Apple and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Apple Watch Series 1 features a rectangular aluminium watch case with a fluoroelastomer band that can be easily removed. It offers protection against splashes, making it a splash-proof device. The digital display has a resolution of 312 x 390 pixels and is equipped with a responsive touchscreen for easy navigation. Additionally, the Apple Watch Series 1 comes with a built-in microphone for voice commands and calls. Designed to track and share your activity, measure workouts, and monitor your health, the Apple Watch Series 1 boasts lightning-fast performance thanks to its new dual-core processor. This smartwatch allows you to stay connected to the people and information that matter most to you, all while keeping you active and healthy. The Apple Watch Series 1 gives you the ability to track your daily activity through Stand, Move, and Exercise rings, encouraging you to stay active throughout the day. It also lets you measure various workouts and monitor your health by keeping track of your heart rate, managing stress levels, and adding relevant health apps. Whether you're looking to stay active, track your progress, or simply stay connected, the Apple Watch Series 1 is a versatile smartwatch that caters to all your needs.

General
BrandApple
ModelWatch v1.0 | MP032CN/A
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)
Design
Watch case colorGray
Watch case materialAluminum
Band colorBlack
Band materialFluoroelastomer
Band size-
Wrist size range140 - 210 mm
ShapeRectangular
Removable strapYes
Protection featuresSplash proof
Watch case size42 mm
Market positioningSmartwatch
Display
Watch glass typeIon-X glass
Display typeDigital
Display resolution312 x 390 pixels
TouchscreenYes
Display diagonal- "
Display brightness450 cd/m²
Display technologyOLED
Performance
Built-in microphoneYes
Compatible memory cardsNot supported
Mobile operating systems supportediOS 10
Operating system installedwatchOS 3
Built-in speaker(s)Yes
Processor manufacturerApple
Processor modelS1P
Processor cores2
Languages support-
FM radioNo
Built-in cameraNo
Ports & interfaces
Bluetooth version4.0
BluetoothYes
USB portNo
Headphone connectivity-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-FiYes
Power
Battery technologyLithium-Ion (Li-Ion)
Battery capacity- mAh
Battery life (max)18 h
Auto standby-
Rechargeable batteryYes
Features
Social network services supported-
Personal info management (PIM)Calendar, Events reminder
AccelerometerYes
Ambient light sensorYes
GyroscopeYes
Heart rate monitorYes
Vibrating motorYes
Weight & dimensions
Width36.4 mm
Depth42.5 mm
Thickness10.5 mm
Weight30 g
Packaging content
AC adapter includedYes
Charging baseYes
Operational conditions
Operating temperature (T-T)0 - 35 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Apple Watch v1.0 below.

What is the weight of the Apple Watch v1.0?

The Apple Watch v1.0 has a weight of 30 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Apple Watch v1.0?

The screen size of the Apple Watch v1.0 is - ".

What is the screen resolution of the display of the Apple Watch v1.0?

The screen resolution of the Apple Watch v1.0 is 312 x 390 pixels.

What is the width of the Apple Watch v1.0?

The Apple Watch v1.0 has a width of 36.4 mm.

What is the depth of the Apple Watch v1.0?

The Apple Watch v1.0 has a depth of 42.5 mm.

Is the manual of the Apple Watch v1.0 available in English?

Yes, the manual of the Apple Watch v1.0 is available in English .

Is your question not listed? Ask your question here

No results