Apple Watch v1.0 manual

Apple Watch v1.0
6.4 · 1
PDF manual
 · 96 pages
English
manualApple Watch v1.0
Chapter 21 Accessibility and Related Settings 77
Pause reading. To have VoiceOver stop reading, tap the display with two ngers. Tap again with
two ngers to resume.
Adjust VoiceOver volume. Double-tap and hold with two ngers, then slide up or down. Or,
open the Apple Watch app on iPhone, tap My Watch, then go to General > Accessibility >
VoiceOver and drag the slider.
Adjust reading rate. Open the Apple Watch app on iPhone, tap My Watch, then go to General >
Accessibility > VoiceOver and drag the sliders.
Turn o the display. For privacy, turn on the screen curtain so no one can see what’s on
Apple Watch while you use VoiceOver. Open the Settings app on Apple Watch, then turn on
General > Accessibility > VoiceOver > Screen Curtain.
Turn o VoiceOver. Open the Settings app , go to General > Accessibility > VoiceOver, then tap
the VoiceOver button.

“Turn VoiceOver off.”

VoiceOver for Setup. VoiceOver can help you set up your Apple Watch—triple-press the Digital
Crown during setup.

Set up Apple Watch using VoiceOver

VoiceOver can help you set up Apple Watch and pair it with your iPhone. To highlight a button or
other item, swipe left or right on the display with one nger. Tap to activate the highlighted item.
Set up Apple Watch using VoiceOver
1 If Apple Watch isn’t on, turn it on by holding down the side button (below the Digital Crown).
2 On Apple Watch, turn on VoiceOver by triple-clicking the Digital Crown.
3 Swipe right or left on the display to choose a language, then double-tap to select it.
4 Swipe right to highlight the Start Pairing button, then double-tap.
5 On iPhone, turn on VoiceOver by going to Settings > General > Accessibility > VoiceOver.
6 To open the Apple Watch app, go to the iPhone Home screen, swipe right to select the
Apple Watch app, then double-tap.
7 To get iPhone ready to pair, swipe right to select the Start Pairing button, then double-tap.
The "Hold Apple Watch up to the Camera" screen appears.
8 To try automatic pairing, point the iPhone camera at the watch from about 6 inches away.
When you hear the pairing conrmation, you can skip to step 14. If you have diculty, you can
try manual pairing, steps 9 through 13.
9 Swipe right to select the Pair Apple Watch Manually button, then double-tap.
10 On Apple Watch, nd your Apple Watch ID: swipe right to the Info About Pairing Apple Watch
Manually button, then double-tap. Swipe right once to hear the unique identier for your
Apple Watch—it’ll be something like Apple Watch 52345”.
11 On iPhone, select your Apple Watch: swipe right until you hear the same Apple Watch identier
that was just displayed on Apple Watch, then double-tap.
12 To get your pairing code, on Apple Watch, swipe right until you hear the six-digit pairing code.
13 Enter the pairing code from Apple Watch on iPhone using the keyboard.

View the manual for the Apple Watch v1.0 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Apple Watch v1.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Apple and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Apple Watch Series 1 features a rectangular aluminium watch case with a fluoroelastomer band that can be easily removed. It offers protection against splashes, making it a splash-proof device. The digital display has a resolution of 312 x 390 pixels and is equipped with a responsive touchscreen for easy navigation. Additionally, the Apple Watch Series 1 comes with a built-in microphone for voice commands and calls. Designed to track and share your activity, measure workouts, and monitor your health, the Apple Watch Series 1 boasts lightning-fast performance thanks to its new dual-core processor. This smartwatch allows you to stay connected to the people and information that matter most to you, all while keeping you active and healthy. The Apple Watch Series 1 gives you the ability to track your daily activity through Stand, Move, and Exercise rings, encouraging you to stay active throughout the day. It also lets you measure various workouts and monitor your health by keeping track of your heart rate, managing stress levels, and adding relevant health apps. Whether you're looking to stay active, track your progress, or simply stay connected, the Apple Watch Series 1 is a versatile smartwatch that caters to all your needs.

General
BrandApple
ModelWatch v1.0 | MP032CN/A
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)
Design
Watch case colorGray
Watch case materialAluminum
Band colorBlack
Band materialFluoroelastomer
Band size-
Wrist size range140 - 210 mm
ShapeRectangular
Removable strapYes
Protection featuresSplash proof
Watch case size42 mm
Market positioningSmartwatch
Display
Watch glass typeIon-X glass
Display typeDigital
Display resolution312 x 390 pixels
TouchscreenYes
Display diagonal- "
Display brightness450 cd/m²
Display technologyOLED
Performance
Built-in microphoneYes
Compatible memory cardsNot supported
Mobile operating systems supportediOS 10
Operating system installedwatchOS 3
Built-in speaker(s)Yes
Processor manufacturerApple
Processor modelS1P
Processor cores2
Languages support-
FM radioNo
Built-in cameraNo
Ports & interfaces
Bluetooth version4.0
BluetoothYes
USB portNo
Headphone connectivity-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-FiYes
Power
Battery technologyLithium-Ion (Li-Ion)
Battery capacity- mAh
Battery life (max)18 h
Auto standby-
Rechargeable batteryYes
Features
Social network services supported-
Personal info management (PIM)Calendar, Events reminder
AccelerometerYes
Ambient light sensorYes
GyroscopeYes
Heart rate monitorYes
Vibrating motorYes
Weight & dimensions
Width36.4 mm
Depth42.5 mm
Thickness10.5 mm
Weight30 g
Packaging content
AC adapter includedYes
Charging baseYes
Operational conditions
Operating temperature (T-T)0 - 35 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Apple Watch v1.0 below.

What is the weight of the Apple Watch v1.0?

The Apple Watch v1.0 has a weight of 30 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Apple Watch v1.0?

The screen size of the Apple Watch v1.0 is - ".

What is the screen resolution of the display of the Apple Watch v1.0?

The screen resolution of the Apple Watch v1.0 is 312 x 390 pixels.

What is the width of the Apple Watch v1.0?

The Apple Watch v1.0 has a width of 36.4 mm.

What is the depth of the Apple Watch v1.0?

The Apple Watch v1.0 has a depth of 42.5 mm.

Is the manual of the Apple Watch v1.0 available in English?

Yes, the manual of the Apple Watch v1.0 is available in English .

Is your question not listed? Ask your question here

No results