Apple iPad 2 3G manual

Apple iPad 2 3G
7.5 · 1
PDF manual
 · 190 pages
English
manualApple iPad 2 3G
Verify that obstacles do not block the wireless signal. Remove any large metal objects between the access
point and the printer. Make sure poles, walls, or support columns containing metal or concrete do not
separate the printer and wireless access point.
Verify that the printer is located away from electronic devices that might interfere with the wireless signal.
Many devices can interfere with the wireless signal including motors, cordless phones, security system
cameras, other wireless networks, and some Bluetooth devices.
Verify that the print driver is installed on the computer.
Verify that you have selected the correct printer port.
Verify that the computer and printer connect to the same wireless network.
For macOS, verify that the wireless router supports Bonjour.

The printer does not print after the wireless conguration completes

If the printer does not print after the wireless conguration completes, try these solutions.
1. Make sure that the printer is turned on and in the ready state.
2. Turn o any third-party rewalls on your computer.
3. Make sure that the wireless network is working correctly.
4. Make sure that your computer is working correctly. If necessary, restart the computer.
5. Verify that you can open the printer HP Embedded Web Server from a computer on the network.
The printer does not print, and the computer has a third-party rewall installed
If the printer does not print, and the computer has a third-party rewall installed, try these solutions.
1. Update the rewall with the most recent update available from the manufacturer.
2. If programs request rewall access when you install the printer or try to print, make sure you allow the
programs to run.
3. Temporarily turn o the rewall, and then install the wireless printer on the computer. Enable the rewall
when you have completed the wireless installation.

The wireless connection does not work after moving the wireless router or printer

If the wireless connection does not work after moving the wireless router or printer, try these solutions.
1. Make sure that the router or printer connects to the same network that your computer connects to.
2. Print a conguration page.
3. Compare the service set identier (SSID) on the conguration page to the SSID in the printer conguration
for the computer.
4. If the numbers are not the same, the devices are not connecting to the same network. Recongure the
wireless setup for the printer.
168 Chapter 9 Solve problems ENWW

View the manual for the Apple iPad 2 3G here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Apple iPad 2 3G or do you need help? Ask your question here

Need help?

Do you have a question about the Apple and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandApple
ModeliPad 2 3G
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Apple iPad 2 3G below.

Is the manual of the Apple iPad 2 3G available in English?

Yes, the manual of the Apple iPad 2 3G is available in English .

Is your question not listed? Ask your question here

No results