APC Mobile Power Pack M12USWH manual

APC Mobile Power Pack M12USWH
6.4 · 1
PDF manual
 · 2 pages
English
manualAPC Mobile Power Pack M12USWH

User Manual

Mobile Power Pack M12USWH

I

Charge USB Devices

Charge devices using the original
USB cable that comes with the
unit, or another USB charging
cable.
Connect the mobile power pack
with the device to be charged and
press the POWER button for
about 1 second.

Charge the Power Pack

Inventory Safety and General

Information

Read this user manual carefully

before using the product, and

keep it for future reference.

Do not short circuit this device. To avoid short
circuit, keep the device away from any metal
objects (e.g., hair clips and keys).
It is normal that the battery will feel warm
during heavy use.
Use this device as instructed to avoid electric
shock; do not disassemble.
This unit is not user repairable; contact APC for
tech support related issues.
CAUTION
RISK OF FIRE AND BURNS.
Do not open, crush, heat above 40°C or
incinerate. Follow manufacturer's instructions.
During normal usage keep the device out in the
open to allow excess heat to dissipate.
Charge M12USWH for 2.5 hours before initial
use.
Keep the USB output port and micro-USB input
port clean and free of obstruction.
Failure to follow these instructions can result in
equipment damage.
Use the included charging cable
to connect the USB output port
of a USB charger or PC to the
micro-USB input port on the
power pack. (Note: some PCs in
sleep mode do no provide output
power to the USB port)

By USB charger By PC

.

LED Status Indicators

To check the remaining battery
charge of this device in standby
mode, press the POWER button
for about 1 second. The battery
capacity display will display
how much battery power is
remaining
Indicator
Status
Battery Full
Battery
charging
Battery
inserted into
the UPS
Fault detected
on USB ports
Mobile
Power Pack
LEDs
All 5 LEDs
illuminate green
LEDs indicate
charge level.
Top LED
flashes.
One LED
illuminates
green from
bottom to top
All 5 LEDs
flash green
m
a
0
0
1
a
Front View
m
a
0
0
2
a
Rear View

POWER button

1.0A USB port

2.4A USB port

Capacity Indicator LEDs

UPS connector (for use with BGE50ML only)

Micro-USB input

User Manual
USB cable
81-100%
61-80%
41-60%
21-40%
0-20%
Note: The charge times in this table
are approximate figures.
Device M12USWH
Smartphone 5x
Tabl et ~ 1x
MPP UM 990-9674 MN01 EN.fm Page 1 Monday, March 23, 2015 5:21 PM

View the manual for the APC Mobile Power Pack M12USWH here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the APC Mobile Power Pack M12USWH or do you need help? Ask your question here

Need help?

Do you have a question about the APC and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandAPC
ModelMobile Power Pack M12USWH | M12USWH
Productpower bank
EAN0731304316473
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Battery technologyLithium-Ion (Li-Ion)
Battery capacity11400 mAh
Fast charging-
Number of charging cycles-
Charging sourceUSB
Basic device charge time2.5 h
Design
Product colorWhite
Housing material-
CertificationcTUVus, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-8, EN61000-4-2, EN61000-4-3, FCC Part 15 Class B, ICES-003, UN 38.3
Charger compatibilityMobile phone/Smartphone, Tablet, MP3/MP4, GPS, E-book reader
LED indicatorsStatus
Number of simultaneously connected devices (max)2
ShapeSquare
Power
Input voltage88 - 142 V
Input power10 W
Output voltage115 V
Auto power offYes
Weight & dimensions
Width130 mm
Depth74 mm
Height23 mm
Weight270 g
Packaging data
Package width164 mm
Package depth125 mm
Package height27 mm
Package weight330 g
Packaging content
Cables includedMicro-USB
ManualYes
Ports & interfaces
USB Type-A output ports2
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the APC Mobile Power Pack M12USWH below.

What is the weight of the APC Mobile Power Pack M12USWH?

The APC Mobile Power Pack M12USWH has a weight of 270 g.

What certifications does the APC Mobile Power Pack M12USWH have?

The APC Mobile Power Pack M12USWH has the following certifications: cTUVus, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-8, EN61000-4-2, EN61000-4-3, FCC Part 15 Class B, ICES-003, UN 38.3.

What is the height of the APC Mobile Power Pack M12USWH?

The APC Mobile Power Pack M12USWH has a height of 23 mm.

What is the width of the APC Mobile Power Pack M12USWH?

The APC Mobile Power Pack M12USWH has a width of 130 mm.

What is the depth of the APC Mobile Power Pack M12USWH?

The APC Mobile Power Pack M12USWH has a depth of 74 mm.

Is the manual of the APC Mobile Power Pack M12USWH available in English?

Yes, the manual of the APC Mobile Power Pack M12USWH is available in English .

Is your question not listed? Ask your question here

No results