APart SDX3T-SLV manual

APart SDX3T-SLV
5.8 · 1
PDF manual
 · 1 page
English
manualAPart SDX3T-SLV

SURFACE MOUNT LOUDSPEAKER

SWITCH POWER IMPEDANCE AMPLIFIER
1 6 Watt 1.6KΩ 100 Volt
2 3 Watt 3.3KΩ 100 Volt
3 1.5 Watt 6.6KΩ 100 Volt
4 OFF OFF OFF
5 16Ω / 40 Watt 16Ω HiFi amp

SDX3T

WWW.APART-AUDIO.COM INFO@APART-AUDIO.COM

• type : 2-way hiFi Pro, sealed box
• woofer : 3,2” CP type
• tweeter : 1” mylar ferro cooled
• protection : system auto-reset 1-guard
• impedance : 16Ω
• 100Volt trafo selector: 6-3-1,5W-OFF-16Ω
• RMS power low-imp.
AES rated : 30 Watts
music - program : 40 Watts
dynamic peak : (lo-cut)70 Watts
SPL 1 watt / 1 m : 86dB
SPL max peak : 104dB
• Freq range : 90 - 20000 Hz
• dispersion : 120° H x 100° V
• IP rating : 54
• enclosure material : enforced PolyPlastic
• bracket included : swivel ball type
• dimensions (h x w x d) : 152 x 105 x 104
• weight : 0,85 Kg

Technical Specifications

The SDX3T 2-way design cabinet loud-
speaker is loved by every interior designer
and architect for its small dimensions and perfect sound
quality. The loudspeaker can be used as a 16Ω or 100V
loudspeaker. In 16Ω use, you can connect up to 4
loudspeakers in parallel on each channel of a standard
4Ω amplifier. For 100V use, the loudspeaker is equipped
with a high quality 6 Watt transformer with several power
taps. Further, the SDX3T is equipped with an auto-reset
protection system. It makes the SDX3T loudspeaker very
suitable for the distribution of background music or
microphone calls. The loudspeaker comes standard with
a swivel ball type bracket. The SDX3T loudspeakers can
be used outdoor. However, be aware of the fact that the
loudspeaker terminals are not protected and that the grill
is made of plasticized painted metal. This means direct
exposure to rain or water is not recommended. In case
this is really needed, we recommend to use the APart
MASK loudspeaker series.

Power Tappings

6 6 6 3 3 3 1.5 1.5++ + + + + +30 Watt =
40 Watt Amplifi er
Amplifi er power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplifi cateur doit etre plus élevée que la puissance totale des haut parleurs.

100 Volt Technology

16 ohm Technology

16Ω
16
16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω
4Ω 4Ω

View the manual for the APart SDX3T-SLV here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the APart SDX3T-SLV or do you need help? Ask your question here

Need help?

Do you have a question about the APart and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other APart owners to provide you with a good answer.

Number of questions: 0

General
APart
SDX3T-SLV | SDX3T-SLV
Speaker
English
User manual (PDF)
Other features
TypeIn-wall/On-wall/In-ceiling speakers
Dimensions (WxDxH)105 x 104 x 152 mm
MaterialPlastic
Loudspeakers
Woofer diameter81.3 mm
Tweeter diameter25.4 mm
Audio output channels2.0 channels
Tweeter
Audio
RMS rated power35 W
Impedance16 Ω
Frequency range90 - 20000 Hz
Peak Music Power Output (PMPO)50, 70 W
Performance
Product colourSilver
Weight & dimensions
Weight850 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the APart SDX3T-SLV below.

Is your question not listed? Ask your question here

No results