APart CM20T-SLV manual

APart CM20T-SLV
7.7 · 1
PDF manual
 · 1 page
English
manualAPart CM20T-SLV

CEILING LOUDSPEAKER

COLOUR KLEUR COULEUR POWER IMPEDANCE
Black Zwart Noir Common
RED ROOD ROUGE 2.5 Watt 4KΩ
GREEN GROEN VERT 5 Watt 2KΩ
YELLOW GEEL JAUNE 10 Watt 1KΩ
BROWN BRUIN BRUN 20 Watt 500R

CM20T

WWW.APART-AUDIO.COM INFO@APART-AUDIO.COM
• Type : 2 - Way HiFi
• Woofer : 6.5” Enforced Polypropylen
• Tweeter : 1” Silk Dome
• Rated Power RMS : 20 W / 100Volt
• Music Power RMS : 32 W / 100Volt
• Rated Power RMS : 40 W / 16Ω
• Music Power RMS : 60 W / 16Ω
• Sound Pres. Level (SPL) 1W/1M : 92dB
• Frequency range : 60 Hz - 20 kHz
• Trafo Power Tappings : 20 - 10 - 5 - 2.5W
• Dispersion @ 1-4-8 KHz : 180°- 80° - 45°
• Dimensions outside Ø : 205MM
• Dimensions Cutout Ø : 183MM
• Depth : 80MM
• Weight : 1.62Kg

Technical Specifications

The APart CM20T 2-way built-in loudspeaker can be
used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use,
you can connect up to 4 loudspeakers in parallel on each channel of a
standard 4 Ohm amplier. For 100 use, the CM20T is equipped with a high-
quality 20 Watt 100 Volt transformer with several power tappings. Therefore
it can be used with high ceilings or places where more back ground noise is
present. The loudspeaker has a 6 ½” enforced Polypropylen woofer what re-
sults in a very low distortion. To complete the sound a 1” tweeter has been in-
tegrated. It makes the CM20T very suitable for the distribution of microphone
calls and back ground music. The housing is made of high quality ABS.
The woofer is made out of enforced polypropylen, what makes it moisture-
proof. The standard colour is white. From 12 pieces on, the loudspeakers
can be painted optionally in any other RAL colour

Power Tappings

20 20 10 5 5 5 2.5 2.5++ + + + + +70 Watt =
120Watt Amplier
Amplier power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

100 Volt Technology

16 ohm Technology

Mounting the loudspeaker

16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω
4Ω 4Ω
Disconnect 100Volt transformer
16 ohm connection
The loudspeaker is easy to install,
due to its simple, quick mounting system
3 screws which are hidden behind the loud-
speaker grill, what gives the loudspeaker a
modern and striking design.
Cutout Ø : 183 MM
Remove the grill before mounting.
You can see four Philips head screws.
Use these screws to thigthen the dog-ears.
Picture shown is the CMS20T

View the manual for the APart CM20T-SLV here, for free. This manual comes under the category Speakers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the APart CM20T-SLV or do you need help? Ask your question here

Need help?

Do you have a question about the APart and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other APart owners to provide you with a good answer.

Number of questions: 0

General
APart
CM20T-SLV | CM20T-SLV
Speaker
English
User manual (PDF)
Other features
TypeIn-wall/On-wall/In-ceiling speakers
Dimensions (WxDxH)205 x 80 x 205 mm
MaterialPolypropylene (PP)
Loudspeakers
Woofer diameter165.1 mm
Tweeter diameter25.4 mm
Audio output channels2.0 channels
Tweeter
Audio
Impedance16 Ω
Frequency range60 - 20000 Hz
Peak Music Power Output (PMPO)60 W
Performance
Product colourSilver
Weight & dimensions
Weight1400 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the APart CM20T-SLV below.

Is your question not listed? Ask your question here

No results