atteries to power a smaller, lower voltage 6 / 7.2 volt,
camera. An internal DC to DC converter brings down the voltage of a 14.4 vol
t
b
attery to 7.2 volts in order to power the camera. This is automatic. At the
same time, the 14.4 volts is still applied" to the PowerTap connector of the Gol
d
Mount allowing you to power an Ultralight
®
, Ultralight 2, or any other piece o
f
equipment which is powered from a 12 volt DC"source (50 watts maximum).
Simply snap a battery onto the Gold Mount adapter and plug the power cor
d
into the camera. Using a DIONIC
®
, HyTRON
TM
50 battery will power the
camera, without a light, for 3 to 8 hours or more. The small size of these
batteries allows you to carry the
b
attery with the supplied pouch, on your belt,
for comfort and ease.
Use of unauthorized equipment in conjunction with Anton/Bauer products constitutes misuse under our warranties
and may limit or void those warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise
assume any liability or responsibility resulting from the use of any battery, charger, or accessory made b
y
Anton/Bauer manufacture with any battery, charger, or accessory not manufactured, produced or sold b
y
Anton/Bauer. Anton/Bauer only authorizes the use of original Anton/Bauer product with this product. Use onl
y
original Anton/Bauer equipment with this product.
C
97;7/2449 """Tgx"F
FC/G973""""""""""""""Ujv"3"qh"3"
Crrtqxcnu"
"
Ctvym"Fgukip"
Uwrrnkgt"
E0"Q‚PGKNN""419135"
"
Cpvqp"1"Dcwgt"Kpe0"
"
"
"
"
"
Ftchvgf"D{"
""
V0"FGUTQUKGTU"
417135"
"
"
"
"
"
Ejgemgf"D{"
""P1C"
"
ApprovedCopy
View the manual for the Anton/Bauer QR-DVX here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Anton/Bauer QR-DVX or do you need help? Ask your question here
Need help?
Do you have a question about the Anton/Bauer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Anton/Bauer owners to provide you with a good answer.
Need help?
Do you have a question about the Anton/Bauer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Anton/Bauer owners to provide you with a good answer.
Number of questions: 0