Antennas Direct ClearStream manual

Antennas Direct ClearStream
6.9 · 1
PDF manual
 · 2 pages
English
manualAntennas Direct ClearStream
1) Reflector with
Collapsible Dipole
and Loop Element Base
2) Loop Element
3) 3 ½” Bolt
4) Weather Boot (optional)
Required, not included: Coaxial Cable, Medium-sized Cross Point Screwdriver.
3
4
Thread coaxial cable A with the connected weather boot through
the VHF IN hole in the Loop Element base (1) and connect cable
to the VHF IN connector on back of the Loop Element (2).
Once connected, slide the weather boot over the connection.
Secure the Reflector with Collapsible Dipole, Loop Element
Base (1), and Loop Element (2) as shown using the 3½ bolt.
Position the Loop Element Base at the center of the Reflector
Assembly bar until holes are alligned.
1
2
3
Thread coaxial cable through the TO TV hole
in the Loop Element Base (1) and connect the
cable to the TO TV connector on the back of
the Loop Element (2).
A
©Antennas Direct 2012 06/12 C2-V
Connect opposite end of coaxial cable to your TV or receiver.
Locate your TV Station transmission towers by going to
antennapoint.com and search on your address or zip code.
Point antenna in the direction of the transmission towers
closest to you and check reception by scanning for channels.
If reception is not as desired, move antenna and rescan.

Manual

View the manual for the Antennas Direct ClearStream here, for free. This manual comes under the category Television antennas and has been rated by 1 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Antennas Direct ClearStream or do you need help? Ask your question here

Need help?

Do you have a question about the Antennas Direct ClearStream and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Antennas Direct ClearStream owners to provide you with a good answer.

Number of questions: 0

Antennas Direct ClearStream specifications

Below you will find the product specifications and the manual specifications of the Antennas Direct ClearStream.

General
Brand Antennas Direct
Model ClearStream
Product Television antenna
EAN 887468859223, 0887468859223
Language English
Filetype Usermanual (PDF)
Features
Supported radio bands UHF,VHF
Impedance 75 Ω
Reception range (UHF channel) 14 - 69
Reception range (VHF channel) 7 - 13
Reception range (UHF) 470 - 806 MHz
Reception range (VHF) 174 - 216 MHz
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Antennas Direct ClearStream below.

Is your question not listed? Ask your question here

No results